
Plant monitor
PimentoFr/plant-monitor
Developpement d'un capteur de potager indoor/outdoorn solaire et connecté via Sigfox

Pico HABakuk is an open-source printed circuit board by serych, from the serych/pico-HABakuk repository on GitHub, published under the CERN-OHL-W-2.0 licence. It is a 2-layer board of 52 × 51.3 mm with 90 parts on 77 nets, routed with 554 tracks and 56 vias.
It is built around the RP2040, GP-02 and SPV1040T, with the W25Q128JVSIQ, MAX809STRG-TP and ABM8-272-T3 among its other parts. Its parts include 27 capacitors, 14 resistors, 7 ICs, 7 connectors and 3 diodes. It belongs with the RP2040 boards of this library.
In this project I am developing a lightweight small balloon tracker board based on the RP2040 processor. The primary software intended for this board is pico-WSPRer.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100n | Capacitor_SMD:C_0603_1608Metric | C5, C6, C7, C9, C11, C12, C13, C14, C15, C16 |
| 5 | 10u | Capacitor_SMD:C_0805_2012Metric | C1, C4, C17, C26, C27 |
| 5 | 1k | Resistor_SMD:R_0603_1608Metric | R1, R5, R6, R7, R8 |
| 3 | 10u/4 | Capacitor_SMD:C_0603_1608Metric | C18, C19, C20 |
| 2 | 15p | Capacitor_SMD:C_0603_1608Metric | C2, C3 |
| 2 | 1n | Capacitor_SMD:C_0603_1608Metric | C21, C23 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric | C8, C22 |
| 2 | 27 | Resistor_SMD:R_0603_1608Metric | R3, R4 |
| 2 | MountingHole | MountingHole:MountingHole_2.1mm | H1, H2 |
| 1 | + | TestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP22 |
| 1 | + | TestPoint:TestPoint_Pad_D1.5mm | TP9 |
| 1 | +3V3 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TP1 |
| 1 | 10 | TestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP17 |
| 1 | 100 | Resistor_SMD:R_0603_1608Metric | R13 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 10u | Inductor_SMD:L_Taiyo-Yuden_MD-3030 | L1 |
| 1 | 10u/10 | Capacitor_SMD:C_0805_2012Metric | C24 |
| 1 | 11 | TestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP18 |
| 1 | 12 | TestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP19 |
| 1 | 13 | TestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP20 |
| 1 | 200 | Resistor_SMD:R_0603_1608Metric | R12 |
| 1 | 220k | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | 220uF | Capacitor_Tantalum_SMD:CP_EIA-3216-10_Kemet-I | C25 |
| 1 | 2k2 | Resistor_SMD:R_0603_1608Metric | R14 |
| 1 | 2u2 | Capacitor_SMD:C_0603_1608Metric | C10 |
| 1 | 360k | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | 510m | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | ABM8-272-T3 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | AD0 | TestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP23 |
| 1 | Ant+ | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J2 |
| 1 | Ant- | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J4 |
| 1 | BAT54W | Package_TO_SOT_SMD:SOT-323_SC-70 | D3 |
| 1 | BSS84 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | D+ | TestPoint:TestPoint_Pad_D1.5mm | TP10 |
| 1 | D- | TestPoint:TestPoint_Pad_D1.5mm | TP11 |
| 1 | Debug | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | GND | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TP4 |
| 1 | GP-02 | RF_GPS:ublox_MAX | U6 |
| 1 | GPS Ant | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J3 |
| 1 | GPS opt | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP2 |
| 1 | LM4040DBZ-3 | Package_TO_SOT_SMD:SOT-23 | U5 |
| 1 | MAX809STRG | SamacSys_Parts:SOT65P210X110-3N | U7 |
| 1 | NCP1117-3.3_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | RESET | Button_Switch_SMD:SW_SPST_Omron_B3FS-100xP | SW2 |
| 1 | RP2040 | RP2040_minimal:RP2040-QFN-56 | U3 |
| 1 | Reset | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TP6 |
| 1 | SMM4F5.0A-TR | SamacSys_Parts:SMM4F15ATR | D1 |
| 1 | SPV1040T | Package_SO:TSSOP-8_4.4x3mm_P0.65mm | U4 |
| 1 | SWCLK | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TP7 |
| 1 | SWD | Connector_Pin:Pin_D1.1mm_L10.2mm_W3.5mm_Flat | TP8 |
| 1 | Solar | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J5 |
| 1 | Super_Cap | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J7 |
| 1 | USB BOOT | Button_Switch_SMD:SW_SPST_Omron_B3FS-100xP | SW1 |
| 1 | USB_BOOT | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TP5 |
| 1 | USB_B_Micro | RP2040_minimal:USB_Micro-B_Amphenol_10103594-0001LF_Horizontal_modified | J1 |
| 1 | USB_D+ | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TP2 |
| 1 | USB_D- | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TP3 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U2 |
| 1 | WS2812B-2020 | LED_SMD:LED_WS2812B-2020_PLCC4_2.0x2.0mm | D2 |
| 1 | boot | TestPoint:TestPoint_Pad_D1.5mm | TP13 |
| 1 | gnd | TestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP21 |
| 1 | gnd | TestPoint:TestPoint_Pad_D1.5mm | TP12 |
| 1 | rst | TestPoint:TestPoint_Pad_D1.5mm | TP14 |
| 1 | sol adc2 | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1 |
| 1 | swclk | TestPoint:TestPoint_Pad_D1.5mm | TP15 |
| 1 | swd | TestPoint:TestPoint_Pad_D1.5mm | TP16 |

PimentoFr/plant-monitor
Developpement d'un capteur de potager indoor/outdoorn solaire et connecté via Sigfox





kongr45gpen/POQUITO-panels
Solar panels with a Magnetorquer for a PocketQube


SFUSatClub/panel-connector
This repository uses the SFU Satellite Team's KiCad component library as a submodule. To start working on the repository:
It measures 52 × 51.3 mm and has 2 copper layers, 1 mm thick.
90 parts, built around the RP2040, GP-02, SPV1040T and W25Q128JVSIQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the serych/pico-HABakuk repository on GitHub, at the commit this page was made from: the board is pico-HABakuk.kicad_pcb and its schematic pico-HABakuk.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-W-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).