Skip to the content
123

MAX809STRG-TP

TECH PUBLICExtended

-40℃~+85℃ 1 1V~5.5V 2.93V 240ms 3uA Active Low Push-pull SOT-23 Supervisor and Reset ICs ROHS

Part id
tech-public/MAX809STRG-TP
Category
Uncategorised
Package
SOT-23
Pins
3
In stock
3,269 at JLCPCB (C52817138)
Used on
7 open-source boards

Overview

The MAX809STRG-TP is an uncategorised made by TECH PUBLIC in a SOT-23 package with 3 pins. -40℃~+85℃ 1 1V~5.5V 2.93V 240ms 3uA Active Low Push-pull SOT-23 Supervisor and Reset ICs ROHS.

PCBKit's library has its footprint (Package_TO_SOT_SMD:SOT-23, from KiCad's library), ready for a KiCad board. 3,269 are in stock at JLCPCB (part C52817138). 7 open-source boards in 6 repositories on GitHub use it.

Symbol

The library has no symbol for this part yet.

Footprint

123
Package_TO_SOT_SMD:SOT-23From KiCad's library

Open-source boards using it

7
  • 2 layers22.9 × 50.8 mmPenguino STM32WL LoRa E5, the printed circuit board in 3D

    Penguino STM32WL LoRa E5

    azerimaker/Penguino-STM32WL-LoRa-E5

    This repo contains all the necessary design and fabrication files for the Seeed Studio LoRa-E5 based Penguino Feather breakout board.

    58 parts42
  • 4 layers22.9 × 50.8 mmPenguino Feather-4260-v1, the printed circuit board in 3D

    Penguino Feather-4260-v1

    azerimaker/Penguino-RAK4260

    This repo contains all the necessary design and fabrication files for the RAK4260 based Penguino SAMR34 Feather breakout board.

    60 parts8
  • 2 layers32 × 76.1 mmDPicoTracker, the printed circuit board in 3D

    DPicoTracker

    Mineinjava/ffellowship

    Frequency Fellowship: Examining Radio Wave Propagation from a High Altitude Balloon

    49 parts1
  • 2 layers52 × 51.3 mmPico HABakuk, the printed circuit board in 3D

    Pico HABakuk

    serych/pico-HABakuk

    90 partsCERN-OHL-W-2.0
  • 2 layers22.9 × 50.8 mmTLM breakout v1 2, the printed circuit board in 3D

    TLM breakout v1 2

    azerimaker/Penguino-SAMR34

    This repo contains all the necessary design and fabrication files for the Penguino SAMR34 RF module and its Feather breakout board.

    42 parts61
  • 2 layers44.6 × 52.5 mmPllTracker, the printed circuit board in 3D

    PllTracker

    Mineinjava/ffellowship

    Frequency Fellowship: Examining Radio Wave Propagation from a High Altitude Balloon

    24 parts1
  • 4 layers96.1 × 65.8 mmVariometerV2.2, the printed circuit board in 3D

    VariometerV2.2

    oiver12/VariometerV2

    Paragliding variometer: custom KiCad PCBs, ESP32 firmware, sensor fusion, e-ink UI, and desktop flight replay.

    129 partsMIT

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the MAX809STRG-TP?

Yes. the footprint Package_TO_SOT_SMD:SOT-23, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MAX809STRG-TP?

SOT-23, with 3 pins. Its footprint is drawn on this page.

Where is the MAX809STRG-TP datasheet?

TECH PUBLIC publishes it: the Datasheet link on this page opens it.

Where can I order the MAX809STRG-TP?

JLCPCB lists it as part C52817138, with 3,269 in stock; the sellers' links on this page open their listings.

What can replace the MAX809STRG-TP?

Parts like it in the library: the XC6206P182MR by TECH PUBLIC, the JTD6206-3.3V by JTD, the BAT54S by TDSEMIC and the BC847A-TD by TDSEMIC. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MAX809STRG-TP?

7 boards in 6 repositories on GitHub; the most starred are listed on this page, with their KiCad files.