
LED AL5887
FluYVy/Modular-Electronics-Toolkit
This project is a diploma thesis done at the HTL Rankweil. It aims to provide future students with a better way to understand and work with different sensors and actuators.

This project is a diploma thesis done at the HTL Rankweil. It aims to provide future students with a better way to understand and work with different sensors and actuators.
DAC MCP4728 is an open-source printed circuit board by FluYVy, from the FluYVy/Modular-Electronics-Toolkit repository on GitHub. It is a 2-layer board of 77 × 35 mm with 30 parts on 21 nets, routed with 215 tracks and 22 vias.
It is built around the LM324 and MCP4728-E/UN. Its parts include 8 capacitors, 8 resistors, 2 ICs, 2 connectors and 1 switch. It belongs with the audio and music boards of this library.
This project is a diploma thesis done at the HTL Rankweil. It aims to provide future students with a better way to understand and work with different sensors and actuators. The system created aims to be modular so that different parts of it can be mixed to create new and creative projects. Different libraries are also provided to help students use these modules.
To further help with the development of different projects, a visual coding engine can be used to create the needed code. This is done with Blockly, which was developed by Google.
The modules created should be compatible with any microcontroller, as long as they can handle 5 volts.
[!WARNING] The provided code and libraries have only been tested with a board using the ATMEGA16A-Chip. For other microcontrollers, you may need to create your own code.
The modules are designed to be able to create new projects by combining them together. As such, even complex problems can be solved easily.
The libraries are designed to be used by students and as such are easy to use and adapt to your project or solution. This is reinforced by the block-based code editor for easy project creation.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 10nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C4, C5, C6, C7, C8 |
| 5 | TestPoint | TestPoint:TestPoint_Pad_1.0x1.0mm | TP1, TP2, TP3, TP4, TP5 |
| 4 | MountingHole_3.2mm_M3 | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 2 | 16kR | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4 |
| 2 | 3.9kR | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7, R8 |
| 2 | 33kR | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 2 | 8.2kR | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R6 |
| 1 | B4B-EH-A | Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J1 |
| 1 | Conn_01x05_Socket | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J2 |
| 1 | LM324 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U2 |
| 1 | MCP4728 | Package_SO:TSSOP-10_3x3mm_P0.5mm | U1 |
| 1 | SW_DIP_x04 | Button_Switch_THT:SW_DIP_SPSTx04_Slide_9.78x12.34mm_W7.62mm_P2.54mm | SW1 |

FluYVy/Modular-Electronics-Toolkit
This project is a diploma thesis done at the HTL Rankweil. It aims to provide future students with a better way to understand and work with different sensors and actuators.

FluYVy/Modular-Electronics-Toolkit
This project is a diploma thesis done at the HTL Rankweil. It aims to provide future students with a better way to understand and work with different sensors and actuators.

FluYVy/Modular-Electronics-Toolkit
This project is a diploma thesis done at the HTL Rankweil. It aims to provide future students with a better way to understand and work with different sensors and actuators.

FluYVy/Modular-Electronics-Toolkit
This project is a diploma thesis done at the HTL Rankweil. It aims to provide future students with a better way to understand and work with different sensors and actuators.

FluYVy/Modular-Electronics-Toolkit
This project is a diploma thesis done at the HTL Rankweil. It aims to provide future students with a better way to understand and work with different sensors and actuators.

FluYVy/Modular-Electronics-Toolkit
This project is a diploma thesis done at the HTL Rankweil. It aims to provide future students with a better way to understand and work with different sensors and actuators.

FluYVy/Modular-Electronics-Toolkit
This project is a diploma thesis done at the HTL Rankweil. It aims to provide future students with a better way to understand and work with different sensors and actuators.

FluYVy/Modular-Electronics-Toolkit
This project is a diploma thesis done at the HTL Rankweil. It aims to provide future students with a better way to understand and work with different sensors and actuators.

CrashOverride85/zc95
4 channel EStim box inspired by the mk312bt, with Lua scripting support

fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io

adeboni/eurorack
This repository stores various eurorack module designs I've made



thebiguno/microcontroller-projects
A home for a bunch of microcontroller projects which don't warrant their own repos.

DanielMartensson/STM32-Ethernet-Camera
PCB board with camera and ethernet connection + CAN-bus

Testbild-synth/dual-vcadsr
Dual Voltage controlled envelope/LFO/Random (Sample/hold) eurorack module
It measures 77 × 35 mm and has 2 copper layers, 1.6 mm thick.
30 parts, built around the LM324 and MCP4728-E/UN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the FluYVy/Modular-Electronics-Toolkit repository on GitHub, at the commit this page was made from: the board is Hardware/Modules/DAC_mit_Filter-MCP4728/DAC-MCP4728.kicad_pcb and its schematic Hardware/Modules/7-Segment_Anzeige/7-Segment_MAX7221CNG_.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask FluYVy before reusing the design.