FluYVy/Modular-Electronics-Toolkit1This project is a diploma thesis done at the HTL Rankweil. It aims to provide future students with a better way to understand and work with different sensors and actuators.
LED AL5887 is an open-source printed circuit board by FluYVy, from the FluYVy/Modular-Electronics-Toolkit repository on GitHub. It is a 2-layer board of 35 × 35 mm with 49 parts on 47 nets, routed with 532 tracks and 54 vias.
Its parts include 36 diodes, 5 connectors, 1 capacitor, 1 resistor and 1 IC.
This project is a diploma thesis done at the HTL Rankweil. It aims to provide future students with a better way to understand and work with different sensors and actuators. The system created aims to be modular so that different parts of it can be mixed to create new and creative projects. Different libraries are also provided to help students use these modules.
To further help with the development of different projects, a visual coding engine can be used to create the needed code. This is done with Blockly, which was developed by Google.
The modules created should be compatible with any microcontroller, as long as they can handle 5 volts.
[!WARNING] The provided code and libraries have only been tested with a board using the ATMEGA16A-Chip. For other microcontrollers, you may need to create your own code.
The modules are designed to be able to create new projects by combining them together. As such, even complex problems can be solved easily.
The libraries are designed to be used by students and as such are easy to use and adapt to your project or solution. This is reinforced by the block-based code editor for easy project creation.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 36 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +20 |
| 4 | MountingHole_3.2mm_M3 | MountingHole:MountingHole_3.2mm_M3 | MH1, MH2, MH3, MH4 |
| 3 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2, J3, J4 |
| 1 | 1µ | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 1 | 3.5k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | AL5887JAZW52-13 | AL5887JAZW52_13:IC_AL5887JAZW52-13 | U1 |
| 1 | B4B-EH-A | Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J1 |
| 1 | B6B-EH-A | Connector_JST:JST_EH_B6B-EH-A_1x06_P2.50mm_Vertical | J5 |
| 1 | SolderJumper_3_Open | Jumper:SolderJumper-3_P2.0mm_Open_TrianglePad1.0x1.5mm | JP2 |
FluYVy/Modular-Electronics-Toolkit
This project is a diploma thesis done at the HTL Rankweil. It aims to provide future students with a better way to understand and work with different sensors and actuators.
FluYVy/Modular-Electronics-Toolkit
This project is a diploma thesis done at the HTL Rankweil. It aims to provide future students with a better way to understand and work with different sensors and actuators.
FluYVy/Modular-Electronics-Toolkit
This project is a diploma thesis done at the HTL Rankweil. It aims to provide future students with a better way to understand and work with different sensors and actuators.
FluYVy/Modular-Electronics-Toolkit
This project is a diploma thesis done at the HTL Rankweil. It aims to provide future students with a better way to understand and work with different sensors and actuators.
FluYVy/Modular-Electronics-Toolkit
This project is a diploma thesis done at the HTL Rankweil. It aims to provide future students with a better way to understand and work with different sensors and actuators.
FluYVy/Modular-Electronics-Toolkit
This project is a diploma thesis done at the HTL Rankweil. It aims to provide future students with a better way to understand and work with different sensors and actuators.
FluYVy/Modular-Electronics-Toolkit
This project is a diploma thesis done at the HTL Rankweil. It aims to provide future students with a better way to understand and work with different sensors and actuators.
FluYVy/Modular-Electronics-Toolkit
This project is a diploma thesis done at the HTL Rankweil. It aims to provide future students with a better way to understand and work with different sensors and actuators.
benkrasnow/DSKY_EL_replica
Schematic, PCB layout, mechanical CAD, and firmware to create a replica of the DSKY with electroluminescent display
It measures 35 × 35 mm and has 2 copper layers, 1.6 mm thick.
49 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the FluYVy/Modular-Electronics-Toolkit repository on GitHub, at the commit this page was made from: the board is Hardware/Modules/Pixel_Matrix/LED-AL5887.kicad_pcb and its schematic Hardware/Modules/7-Segment_Anzeige/7-Segment_MAX7221CNG_.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask FluYVy before reusing the design.