

AVRist watch
⌚ An ATmega328P controlling a small OLED display powered by a chargable LiPo battery.
- Size
- 35 × 37 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 28
- Nets
- 49
- Pads
- 135
- Tracks, vias
- 182, 21
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 17 Nov 2018
- Updated
- 3 Oct 2023
Overview
AVRist watch is an open-source printed circuit board by flonkler, from the flonkler/AVRist-watch repository on GitHub. It is a 2-layer board of 35 × 37 mm with 28 parts on 49 nets, routed with 182 tracks and 21 vias.
It is built around the ATMEGA328P-AU, DMN2053UVT and DS3231MZ/V+, with the SSSS811101 among its other parts. Its parts include 6 capacitors, 5 resistors, 5 ICs, 4 connectors and 3 switches. It belongs with the power and lEDs and displays boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
4ATMEGA328P-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)DMN2053UVT
TSOT-26-55℃~+150℃ 1.2V 2 N-Channel 20V 29mΩ@10V 4.6nC@4.5V 414pF 43pF 6.5A 800mW TSOT-26 MOSFETs ROHSDiodes IncorporatedMOSFETsDS3231MZ/V+
SOIC-8-40℃~+85℃ 2.3V~5.5V Built-in I2C Temperature compensation、Backup power management and battery charging、Alarm function、Locking and tamper-proof、Periodic interrupt output SOIC-8 Real Time Clocks ROHSMaxim Integrated (Analog Devices)Real Time ClocksSSSS811101
SMD-40℃~+85℃ 10,000 cycles 300mA 4.1mm 5V Rectangular Columnar SMD(SMT) Tab SPDT Surface Mount, Right Angle SMD Slide Switches ROHSALPSALPINESlide Switches
README
README.mdAVRist-watch
A DIY project that involves an ATmega328p that controlls a small monochrome OLED display powered by a chargable LiPo battery - or in short: a digital wrist watch.
Features
-
Real Time Clock: An IC keeps track of the current date and time even if the display and microcontroller is turned off.
-
Li-Po battery management: The board features a charge controller that allows charging the battery via Micro USB. Another IC protects the battery from over-charging and over-discharging.
-
OLED-Display: A monochrome 128x64 pixel OLED display is used to show the current time.
-
Energy Efficiency: After displaying the current time for a couple of seconds the display turns off and the microcontroller enters a sleep mode. This saves battery power.
Images


Schematic
Parts
28| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100n | Capacitor_SMD:C_0603_1608Metric | C2, C4, C5, C6 |
| 2 | 10K | Resistor_SMD:R_0603_1608Metric | R2, R3 |
| 2 | 2.7K | Resistor_SMD:R_0603_1608Metric | R1, R7 |
| 2 | 4.7u | Capacitor_SMD:C_0603_1608Metric | C1, C3 |
| 2 | SW_DIP_x01 | pcb:TL3340_SMT | SW2, SW3 |
| 1 | 330 | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | AP9101CK6 | pcb:AP9101C_SOT-25 | U3 |
| 1 | ATmega328P-AU | Package_QFP:TQFP-32_7x7mm_P0.8mm | U1 |
| 1 | AVR ISP connector | pcb:CONN_AVR_ISP_SMD | J2 |
| 1 | Conn_01x02_Male | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J4 |
| 1 | DMN2053UVT | pcb:DMN2053UVT_TSOT-26 | U4 |
| 1 | DS3231MZ | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | Display connector | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J3 |
| 1 | LED | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | MCP73831-2-OT | pcb:MCP73831_SOT-23 | U2 |
| 1 | SSSS811101 | pcb:SSSS811101 | SW1 |
| 1 | USB_B_Micro | pcb:USB_B_micro | J1 |
The 24 most common of 28 parts.
Similar boards
- 4 layers98.5 × 193.5 mm

- 2 layers68 × 55 mm

Aurdino oled. sd card
ayodhyaphanidurgaprasad-source/PCB-Projects
Designed a 2-layer PCB that converts USB to EtherCAT for industrial network communication. Worked on the complete design flow — schematic design, component selection, PCB layout, and routing in KiCad.
66 parts - 2 layers100 × 100 mm

- 2 layers44.5 × 57.8 mm

- 2 layers50 × 70 mm

- 2 layers197 × 249.7 mm

- 4 layers66.9 × 87 mm

MeshtasticNode BQ25185
h0lad/SolarMeshtasticNode
This is a Meshtastic Solar Node PCB based on the Heltec HT-CT62 and the linear solar charge controller TI BQ25185.
49 parts40CERN-OHL-S-2.0 - 4 layers110 × 64 mm

SYCL Badge 2024
ZigEmbeddedGroup/sycl-badge
The badge for the SYCL conference! https://zigembeddedgroup.github.io/sycl-badge/
145 parts39
Questions
How big is the AVRist watch PCB?
It measures 35 × 37 mm and has 2 copper layers, 1.6 mm thick.
What parts does the AVRist watch use?
28 parts, built around the ATMEGA328P-AU, DMN2053UVT, DS3231MZ/V+ and SSSS811101. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the AVRist watch KiCad files?
From the flonkler/AVRist-watch repository on GitHub, at the commit this page was made from: the board is pcb/pcb.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the AVRist watch design in my own project?
Its repository states no licence, so its author keeps all rights: ask flonkler before reusing the design.