Skip to the content
2 layers68 × 55 mmAurdino oled. sd card, the printed circuit board in 3D

Designed a 2-layer PCB that converts USB to EtherCAT for industrial network communication. Worked on the complete design flow — schematic design, component selection, PCB layout, and routing in KiCad. Ran DRC checks to ensure a clean, error-free design.

Size
68 × 55 mm
Copper layers
2
Thickness
1.6 mm
Parts
66
Nets
67
Pads
214
Tracks, vias
376, 71
Pours
3
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
22 Aug 2026
Updated
17 Sep 2026

Overview

Aurdino oled. sd card is an open-source printed circuit board by ayodhyaphanidurgaprasad-source, from the ayodhyaphanidurgaprasad-source/PCB-Projects repository on GitHub. It is a 2-layer board of 68 × 55 mm with 66 parts on 67 nets, routed with 376 tracks and 71 vias.

It is built around the ATMEGA328P-AU, DHT11 and FT231XS-R, with the AMS1117, DS3231MZ/V+ and MIC5205-2.5YM5 among its other parts. Its parts include 21 capacitors, 18 resistors, 6 ICs, 4 diodes and 3 connectors. It belongs with the lEDs and displays boards and the AVR (ATmega, ATtiny) boards of this library.

Main components

7

README

README.md
Logo - SURE ProEd

SURE ProEd (formerly SURE Trust)

Skill Upgradation for Rural youth Empowerment Trust


student details

Name: A Phani durga prasad

Email ID: phanig6pcb@gmail.com

College Name: JNTUK clg of engineering

Branch/Specialization : Electronics And Communication Engineering

College ID: VVGV


Course Details

Course Opted: pcb designing

Instructor Name: mounika mam

Duration: 6 months


Trainer Details

Trainer Name: paramesh kumar

Trainer Email ID: parameshkumar432@gmail.com

Trainer Designation: Hardware design engineer


Table of Contents

  • Course Learning [blocked]
  • Projects Completed [blocked]
  • Project Introduction [blocked]
  • Technologies Used [blocked]
  • Roles and Responsibilities [blocked]
  • [Project Report]
  • [Learnings from LST & SST]
  • [Community Services]
  • Certificate
  • Acknowledgments [blocked]

Overall Learning

Through this project and my PCB Design internship, I gained practical knowledge of the complete PCB design process using KiCad I learned how to understand circuit requirements and develop a schematic by placing electronic components and creating the required electrical connections.
I learned how to select suitable components and assign appropriate PCB footprints based on their package types and pin configurations. I also gained practical experience in transferring the schematic to the PCB Editor and developing a two-layer PCB layout.

Projects Completed

Project 1: <!USB TO ETHERCAT ADAPTER BOARD -->

(You can add more projects as needed)

Project 1:USB TO ETHERCAT ADAPTER BOARD

This project involved designing and developing a basic functional module using the core concepts taught in the course. It focused on understanding requirements, creating structured code, and implementing key features.

→ View Full Project Report


References

Learnings from LST and SST

LST – Life Skills Training Through LST sessions, I improved my self-confidence, time management, problem-solving, decision-making, teamwork, and positive attitude. These sessions helped me handle challenges and become more responsible in my professional life. SST – Soft Skills Training Through SST sessions, I improved my communication skills, English speaking, presentation skills, interpersonal skills, active listening, and interview skills. These sessions helped me communicate more confidently in the workplace.)

Community Services

During my internship, I participated in community service activities that helped me develop social responsibility, teamwork, and a willingness to support others.

Activities Involved

  • Tree Plantation Drive – Participated in tree planting and contributed to environmental awareness.
  • Helping Elderly Citizens – Assisted elderly people with simple daily activities.

Impact / Contribution

  • Helped create a supportive environment during the blood donation camp.
  • Actively participated in promoting a greener and cleaner surroundings.
  • Offered personal assistance to elder citizens, strengthening community bonds.
  • Improved skills in communication, coordination, and social responsibility.

Photos

  • These are just placeholder (sample) images
Community Service Photo 1 Community Service Photo 2

Certificate

The internship certificate serves as an official acknowledgment of the successful completion of my training period. It will be issued by the organization upon fulfilling all required tasks and meeting the performance expectations of the program. The certificate validates the skills, experience, and contributions made during the internship.

Internship Certificate


Acknowledgments

sincerely thank SURE Trust for providing me with the opportunity to complete my internship in PCB Designing. I am grateful to my trainers and mentors for their valuable guidance and support throughout the internship. I also thank the LST and SST trainers for helping me improve my life skills, communication, confidence, and professional skills.

Parts

66
QtyValueFootprintReferences
90.1UFCapacitor_SMD:C_0805_2012MetricC2, C9, C10, C11, C12, C16, C19, C20, C21
71KResistor_SMD:R_0805_2012MetricR3, R6, R7, R8, R10, R17, R18
40.1ufCapacitor_SMD:C_0805_2012MetricC1, C3, C6, C7
4MountingHoleMountingHole:MountingHole_2.2mm_M2H1, H2, H3, H4
35.1KResistor_SMD:R_0805_2012MetricR11, R15, R16
21.0UFCapacitor_SMD:C_0805_2012MetricC15, C18
210KResistor_SMD:R_0805_2012MetricR4, R9
227Resistor_SMD:R_0805_2012MetricR1, R2
247UFCapacitor_SMD:C_0805_2012MetricC13, C14
247pfCapacitor_SMD:C_0805_2012MetricC4, C5
2Thermistor_NTCResistor_SMD:R_1206_3216MetricTH1, TH2
110UFCapacitor_SMD:C_0805_2012MetricC17
110UFLED_SMD:LED_0805_2012MetricD1
110ufCapacitor_SMD:C_0805_2012MetricC8
11kResistor_SMD:R_0805_2012MetricR5
1240Resistor_SMD:R_0805_2012MetricR13
12N7002Package_TO_SOT_SMD:SOT-23Q1
14.7KResistor_SMD:R_0805_2012MetricR14
16v/0.5AFuse:Fuse_0805_2012MetricF1
1715Resistor_SMD:R_0805_2012MetricR12
1AMS1117Package_TO_SOT_SMD:SOT-223-3_TabPin2U5
1ATmega328P-APackage_QFP:TQFP-32_7x7mm_P0.8mmU1
1Barrel_Jack_Switch_Pin3RingConnector_BarrelJack:BarrelJack_HorizontalJ6
1Battery_CellBattery:BatteryHolder_Keystone_3000_1x12mmBT1
1CrystalCrystal:Crystal_HC18-U_VerticalY1(16MHz)1
1DHT11Sensor:Aosong_DHT11_5.5x12.0_P2.54mmU3
1DS3231MZPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU6
1FT231XSPackage_SO:SSOP-20_3.9x8.7mm_P0.635mmU2
1LEDLED_SMD:LED_0805_2012MetricGREEN1
1LOGOphani_lib:22G***
1MBRA340Diode_SMD:D_SMAD4
1MIC5205-2.5YM5Package_TO_SOT_SMD:SOT-23-5U4
1Micro_SD_CardConnector_Card:microSD_HC_Hirose_DM3AT-SF-PEJM5J2
1RedLED_SMD:LED_0805_2012MetricD3
1SW_PushButton_Switch_SMD:SW_Push_1P1T_NO_E-Switch_TL3301NxxxxxGSW2
1USB_B_MicroConnector_USB:USB_A_Molex_67643_HorizontalJ8
1YellowLED_SMD:LED_0805_2012MetricD2

The 65 most common of 66 parts.

More from ayodhyaphanidurgaprasad-source/PCB-Projects

5
  • 2 layers82.5 × 50 mmArduino MCU schematic, the printed circuit board in 3D

    Arduino MCU schematic

    ayodhyaphanidurgaprasad-source/PCB-Projects

    Designed a 2-layer PCB that converts USB to EtherCAT for industrial network communication. Worked on the complete design flow — schematic design, component selection, PCB layout, and routing in KiCad.

    63 parts
  • 2 layers71 × 49 mmSTM32F103C8T6 MCU, the printed circuit board in 3D

    STM32F103C8T6 MCU

    ayodhyaphanidurgaprasad-source/PCB-Projects

    Designed a 2-layer PCB that converts USB to EtherCAT for industrial network communication. Worked on the complete design flow — schematic design, component selection, PCB layout, and routing in KiCad.

    37 parts
  • 2 layers52.7 × 37.6 mmTSH82 CONGURABLE OP AMP BOARD, the printed circuit board in 3D

    TSH82 CONGURABLE OP AMP BOARD

    ayodhyaphanidurgaprasad-source/PCB-Projects

    Designed a 2-layer PCB that converts USB to EtherCAT for industrial network communication. Worked on the complete design flow — schematic design, component selection, PCB layout, and routing in KiCad.

    32 parts
  • 2 layers57 × 39 mmArduino Pro Mini, the printed circuit board in 3D

    Arduino Pro Mini

    ayodhyaphanidurgaprasad-source/PCB-Projects

    Designed a 2-layer PCB that converts USB to EtherCAT for industrial network communication. Worked on the complete design flow — schematic design, component selection, PCB layout, and routing in KiCad.

    30 parts
  • 2 layers42 × 30 mmQwiic power switch, the printed circuit board in 3D

    Qwiic power switch

    ayodhyaphanidurgaprasad-source/PCB-Projects

    Designed a 2-layer PCB that converts USB to EtherCAT for industrial network communication. Worked on the complete design flow — schematic design, component selection, PCB layout, and routing in KiCad.

    23 parts

Similar boards

  • 2 layers33.7 × 20.3 mmMini pro, the printed circuit board in 3D

    Mini pro

    sagarHackeD/Arduino_pro_mini_KiCad5

    Arduino pro mini project in kicad 5

    23 parts9GPL-3.0
  • 4 layers65.5 × 65.8 mmEsp32Drone, the printed circuit board in 3D

    Esp32Drone

    Roshan-khatri78/Electronics-Projects-KiCad-

    A collection of my KiCad projects and PCB designs. These projects reflect my learning journey in electronics and PCB design.

    76 parts2
  • 2 layers36 × 39.3 mmBCD watch V1.0, the printed circuit board in 3D

    BCD watch V1.0

    kitspace-test-repos/kicad6-file-collection

    45 partsMIT
  • 4 layers85 × 57.5 mmFirefly, the printed circuit board in 3D

    Firefly

    jdthorpe/kicad-module-parser

    A PegJS parser for Kicad Modules

    104 parts12
  • 2 layers79.2 × 59.2 mmGpstracker, the printed circuit board in 3D

    Gpstracker

    blemasle/gpstracker-pcb

    Connected GPS tracker PCB

    205 parts33MIT
  • 4 layers68.6 × 53.3 mmTapMatrix, the printed circuit board in 3D

    TapMatrix

    cbonsig/openclock

    Open Clock: an open source hardware touchscreen digital clock

    65 parts27
  • 4 layers138.4 × 138.3 mmGRBL board, the printed circuit board in 3D

    GRBL board

    ephemeridis/GRBL_board

    This is a PCB designed to run GRBL, an open source CNC control software that is designed and optimised for Arduino.

    287 parts2GPL-3.0
  • 2 layers97 × 64 mmCnc grbl, the printed circuit board in 3D

    Cnc grbl

    emavap/Grbl-Laser-PCB

    GRBL board for Laser Cutters

    44 parts1

Questions

How big is the Aurdino oled. sd card PCB?

It measures 68 × 55 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Aurdino oled. sd card use?

66 parts, built around the ATMEGA328P-AU, DHT11, FT231XS-R and AMS1117. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Aurdino oled. sd card KiCad files?

From the ayodhyaphanidurgaprasad-source/PCB-Projects repository on GitHub, at the commit this page was made from: the board is Mini Projects/PROJECT 5/Aurdino_oled. sd card.kicad_pcb and its schematic FINAL PROJECT/USB-TO-ETHERCAT-ADAPTER-BOARD-F.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Aurdino oled. sd card design in my own project?

Its repository states no licence, so its author keeps all rights: ask ayodhyaphanidurgaprasad-source before reusing the design.