Arduino pro mini project in kicad 5
Mini pro is an open-source printed circuit board by sagarHackeD, from the sagarHackeD/Arduino_pro_mini_KiCad5 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 33.7 × 20.3 mm with 23 parts on 34 nets, routed with 311 tracks and 37 vias.
It is built around the ATMEGA328-PU and MIC5205-2.5YM5. Its parts include 6 capacitors, 5 resistors, 5 connectors, 2 ICs and 2 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 0.1u | LED_SMD:LED_0603_1608Metric | C3, C4, C5, C6 |
| 3 | R | LED_SMD:LED_0603_1608Metric | R3, R4, R5 |
| 2 | 10k | LED_SMD:LED_0603_1608Metric | R1, R2 |
| 2 | 10u | LED_SMD:LED_1206_3216Metric | C1, C2 |
| 2 | CONN_02 | Connectors:1X02 | J2, J3 |
| 2 | CONN_12 | Connectors:1X12 | J1, J4 |
| 1 | ATMEGA328P | Silicon-Standard:TQFP32-08 | U2 |
| 1 | CONN_06FEMALE_LOCK | Connectors:1X06_FEMALE_LOCK.010 | J5 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | MIC5205-2.5YM5 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | MOMENTARY-SWITCH-SPST-2-SMD-5.2MM | Switches:TACTILE_SWITCH_SMD_5.2MM | S1 |
| 1 | Resonator_Small | Clocks:RESONATOR-SMD-3.2X1.3 | Y1 |
| 1 | SolderJumper_2_Bridged | Jumpers:SMT-JUMPER_2_NC_TRACE_NO-SILK | JP1 |
| 1 | red | LED_SMD:LED_0603_1608Metric | D1 |
ayodhyaphanidurgaprasad-source/PCB-Projects
Designed a 2-layer PCB that converts USB to EtherCAT for industrial network communication. Worked on the complete design flow — schematic design, component selection, PCB layout, and routing in KiCad.
Roshan-khatri78/Electronics-Projects-KiCad-
A collection of my KiCad projects and PCB designs. These projects reflect my learning journey in electronics and PCB design.
peej/lumberjack-keyboard
5x12 ortholinear through-hole component keyboard PCB for standard 60% cases
It measures 33.7 × 20.3 mm and has 2 copper layers, 1.6 mm thick.
23 parts, built around the ATMEGA328-PU and MIC5205-2.5YM5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the sagarHackeD/Arduino_pro_mini_KiCad5 repository on GitHub, at the commit this page was made from: the board is mini_pro.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
