4 layers85.6 × 54 mm
SYCL Badge 2024
ZigEmbeddedGroup/sycl-badge
The badge for the SYCL conference! https://zigembeddedgroup.github.io/sycl-badge/
92 parts39
4 layers110 × 64 mm
SYCL Badge 2024
ZigEmbeddedGroup/sycl-badge39The badge for the SYCL conference! https://zigembeddedgroup.github.io/sycl-badge/
- Size
- 110 × 64 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 145
- Nets
- 112
- Pads
- 525
- Tracks, vias
- 1,073, 260
- Pours
- 26
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 28 Oct 2023
- Updated
- 24 Oct 2026
Overview
SYCL Badge 2024 is an open-source printed circuit board by ZigEmbeddedGroup, from the ZigEmbeddedGroup/sycl-badge repository on GitHub. It is a 4-layer board of 110 × 64 mm with 145 parts on 112 nets, routed with 1,073 tracks and 260 vias.
It is built around the RP2354B, TLV9001IDCK and GD25Q16ESIGR, with the TPS61041DBVRG, AP2112K-3.3TRG1 and AP2210N-4.0TRG1 among its other parts. Its parts include 45 resistors, 43 capacitors, 11 diodes, 10 ICs and 5 connectors. It belongs with the lEDs and displays boards and the RP2350 boards of this library.
Main components
12
RP2354B
QFN-80-EP(10x10)-20℃~+85℃ 12bit 150MHz 2MB 32 Bit 48 520KB ARM Cortex-M33 Built-in+External External pin reset (NRST)、True random number generator (TRNG) OTP QFN-80-EP(10x10) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
TLV9001IDCK
SC-70-5-2.75V~-900mV、900mV~2.75V -40℃~+125℃ 1 1.6mV 1.8V~5.5V 1MHz 2V/us 2pA 4.7nV/√Hz@1kHz 40mA 5pA 600nV/℃ 60uA 86dB EMI filtering/RF suppression Rail-to-Rail Input, Rail-to-Rail Output SC-70-5 Operational Amplifier ROHSTexas InstrumentsOperational Amplifier
GD25Q16ESIGR
SOP-8-208mil100,000 cycles 11uA 133MHz 150ms@(32KB) 16Mbit 2.7V~3.6V 20 Years 400us SPI SOP-8-208mil NOR FLASH ROHSGigaDevice Semicon BeijingNOR FLASH
TPS61041DBVRG
SOT-23-5-40℃~+85℃ 1.8V~28V 1.8V~6V 1MHz Boost Built-in Under Voltage Protection、Over-Temperature Protection (OTP) SOT-23-5 LED Drivers ROHSHANSCHIP semiconductorLED DriversAP2112K-3.3TRG1
SOT-25-5-40℃~+85℃@(Ta) 1 250mV@(600mA) 3.3V 50uVrms 55uA 600mA 65dB@(1kHz) 6V Fixed Over Current Protection、Thermal Shutdown、Enable control Positive SOT-25-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
AP2210N-4.0TRG1
SOT-23-3-40℃~+125℃@(Tj) 1 13.2V 1uA 300mA 400mV@(300mA) 4V 75dB@(100Hz) Fixed Over Current Protection、Over Temperature Protection、Reverse connection protection、Enable Positive SOT-23-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsBH-AAA-B5AA005
--25~85℃ Battery holder Gold plating No. 7 Phosphor bronze - ROHSMYOUNGButton And Strip Battery Connector
USBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
RC0603FR-0710KL
UncategorisedUnknown maker
CL21B104KACNNNC
0805100nF 25V X7R ±10% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMTCL21B105KAFNNNE
08051uF 25V X7R ±10% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMTRC0603JR-07100KL
UncategorisedUnknown maker
README
README.mdSoftware You Can Love Badge
Welcome to the SYCL badge repository.
Quick Start
Prerequisites
- Zig
0.17.0
Build Firmware and Carts
zig buildThis will create:
- zig-out/carts: Built cart(ridge)s ready to be installed
- zig-out/sim: Simulator executables for easy debugging
- zig-out/firmware: Badge OS binary
- zig-out/bin: Miscellaneous tools for the host computer
Create your cart
To make your own cart,
- Make a directory in
carts/for your cart. Copying an existing cart is recommended, or copycarts/empty-cartfor a minimal starting point. - Add a call to
add_cartin build.zig for your new cart - Use
zig buildto build
Load a cart onto the Badge
- Plug in the badge over USB so it mounts as a mass storage drive.
- Copy a
.uf2fromzig-out/cartsonto the badge drive. - On the badge, select the cart from the menu.
Debugging a cart with the simulator
Use your favorite local debugger to debug the executable in zig-out\sim. The cart code runs on its own thread, which you may need to find.
Flash the Badge OS
Warning! Changing the OS ABI may make it impossible to run carts made by other attendees, or to share your carts with others!
To replace the OS,
- Plug in the badge over USB.
- Hold the button marked "BOOT_SEL" on the back of the badge
- While holding the button, turn the badge off and on again.
- The badge screen will not turn on, but it will still mount as a mass storage drive.
- Copy zig-out\firmware\sycl-os-kernel.uf2 to the badge
- The badge will automatically restart with the new OS.
Documentation
The SYCL Badge V2 User Manual can be found here.
Parts
145| Qty | Value | Footprint | References |
|---|---|---|---|
| 21 | 10k | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R10, R13, R14, R15, R16, R17, R20, R25, R27, R29, R30, R37, R39 +5 |
| 19 | 100n | Capacitor_SMD:C_0402_1005Metric | C13, C17, C18, C21, C26, C27, C28, C29, C30, C31, C32, C33, C35, C36, C37, C38 +3 |
| 14 | 1u | Capacitor_SMD:C_0402_1005Metric | C1, C2, C4, C5, C6, C7, C8, C10, C12, C14, C15, C34, C41, C42 |
| 8 | 100k | Resistor_SMD:R_0402_1005Metric | R7, R18, R19, R35, R36, R38, R44, R45 |
| 6 | 4.7u | Capacitor_SMD:C_0402_1005Metric | C3, C11, C19, C20, C22, C23 |
| 6 | TestPoint | TestPoint:TestPoint_Pad_D2.0mm | TP3, TP4, TP5, TP6, TP7, TP8 |
| 5 | SK6812MINI | LED_SMD:LED_SK6812MINI_PLCC4_3.5x3.5mm_P1.75mm | D1, D2, D4, D5, D6 |
| 5 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP6, JP9, JP10, JP11, JP12 |
| 4 | 100R | Resistor_SMD:R_0402_1005Metric | R21, R22, R23, R24 |
| 4 | MountingHole | MountingHole:MountingHole_3mm_Pad | H2, H3, H4, H5 |
| 4 | SWITCH_TACT_SMT_6MMSMALL | Button_Switch_SMD:SW_Push_1P1T_NO_6x6mm_H9.5mm | A1, B1, SELECT1, START1 |
| 2 | 15p | Capacitor_SMD:C_0402_1005Metric | C24, C25 |
| 2 | 27R | Resistor_SMD:R_0402_1005Metric | R32, R33 |
| 2 | 2K2 | Resistor_SMD:R_0402_1005Metric | R26, R28 |
| 2 | Conn_01x03_Socket | Connector_JST:JST_SH_SM03B-SRSS-TB_1x03-1MP_P1.00mm_Horizontal | J3, J4 |
| 2 | MBR0540 | Diode_SMD:D_SOD-123 | D3, D8 |
| 2 | Solder | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP7, JP8 |
| 1 | 10p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C9 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | C16 |
| 1 | 180k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12 |
| 1 | 1k | Resistor_SMD:R_0402_1005Metric | R34 |
| 1 | 3.3u | Inductor_SMD:L_APV_ANR252012 | L2 |
| 1 | 30R | Resistor_SMD:R_1206_3216Metric | R42 |
| 1 | 33R | Resistor_SMD:R_0402_1005Metric | R31 |
| 1 | 3K3 | Resistor_SMD:R_0603_1608Metric | R43 |
| 1 | 500R | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 66.5k | Resistor_SMD:R_0402_1005Metric | R40 |
| 1 | 680k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11 |
| 1 | ABM8-272-T3 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | ALS-PT19 | Diode_SMD:D_0603_1608Metric | Q1 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U7 |
| 1 | AP2210N-4.0TRG1 | Package_TO_SOT_SMD:SOT-23-3 | U2 |
| 1 | BH-AAA-B5AA005 | BH-AAA-B5AA005:BH-AAA-B5AA005 | U5 |
| 1 | BLUE | LED_SMD:LED_0402_1005Metric | D11 |
| 1 | BOOT_SEL | Button_Switch_SMD:SW_Push_1P1T_XKB_TS-1187A | SW1 |
| 1 | CMT-7525-80-SMT-TR | CMT_7525_80_SMT_TR:XDCR_CMT-7525-80-SMT-TR | LS1 |
| 1 | D_Zener_Filled | Diode_SMD:D_SOD-523 | D9 |
| 1 | GD25Q16 | Package_SO:SOP-8_3.76x4.96mm_P1.27mm | U8 |
| 1 | GREEN | LED_SMD:LED_0402_1005Metric | D10 |
| 1 | I2C Connector | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J2 |
| 1 | Logo | SYCL Badge 2024:microzig_logo | H1 |
| 1 | MAX98357A | Package_DFN_QFN:TQFN-16-1EP_3x3mm_P0.5mm_EP1.23x1.23mm | U6 |
| 1 | Q_PMOS_DGS | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | RED | LED_SMD:LED_0402_1005Metric | D7 |
| 1 | RESET | Button_Switch_SMD:SW_Push_1P1T_XKB_TS-1187A | SW3 |
| 1 | RP2354B | Package_DFN_QFN:QFN-80-1EP_10x10mm_P0.4mm_EP3.4x3.4mm_ThermalVias | IC1 |
| 1 | SWPA5020S100MT | Inductor_SMD:L_Sunlord_SWPA5020S | L1 |
| 1 | SW_SPDT | Button_Switch_SMD:SW_SPDT_PCM12 | SW2 |
| 1 | TLV9001IDCK | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U10 |
| 1 | TPS61041DBVR | TPS61041DBVR:SOT95P280X145-5N | U4 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U1 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_Palconn_UTC16-G | J1 |
| 1 | XF3M-1515-1B | Connector_FFC-FPC:Hirose_FH12-15S-0.5SH_1x15-1MP_P0.50mm_Horizontal | J5 |
| 1 | ~ | sycl-badge:2425755-1 | U3 |
More from ZigEmbeddedGroup/sycl-badge
1Similar boards
- 2 layers140 × 64.8 mm
Console hardware
ECE411-Practicum-Group11/ECE411-PracticumProject-G11
Fall 2022 ECE 411 Practicum Project for Group 11
68 partsCC0-1.0 - 2 layers157.5 × 72 mm
Nixie tube clock
mbelanger0/nixie-tube-clock
A nixie tube clock as a final PCB design project for ENGR3430: Eclectronics at Olin College of Engineering
145 parts - 4 layers
SmartCompass
wildjames/smart_compass
The product is going to be something similar to the compass in the Pirates of the Caribbean.
78 parts - 2 layers95 × 54 mm
EinkPDA screen
TalismanDesign/PocketMage_PDA
An E-Ink PDA device using the ESP32 S3.
28 parts2kApache-2.0 - 2 layers511.6 × 117.8 mm
- 2 layers40 × 65 mm
- 2 layers200 × 115 mm
BMSJ
Arrow-air/project-longshot
Project Longshot documentation, designs, and project artifacts.
310 parts4CERN-OHL-S-2.0 - 2 layers20 × 20 mm
B OPT4048DTSR BRK R1.0
Boardoza/Boardoza_OPT4048_High_Precision_Color_Sensor_Breakout_Board
High-precision ambient light and color sensing breakout board based on the Texas Instruments OPT4048 sensor.
16 partsCC-BY-SA-4.0
Questions
How big is the SYCL Badge 2024 PCB?
It measures 110 × 64 mm and has 4 copper layers, 1.6 mm thick.
What parts does the SYCL Badge 2024 use?
145 parts, built around the RP2354B, TLV9001IDCK, GD25Q16ESIGR and TPS61041DBVRG. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SYCL Badge 2024 KiCad files?
From the ZigEmbeddedGroup/sycl-badge repository on GitHub, at the commit this page was made from: the board is kicad/v2/SYCL Badge 2024.kicad_pcb and its schematic kicad/v1/SYCL Badge 2024.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SYCL Badge 2024 design in my own project?
Its repository states no licence, so its author keeps all rights: ask ZigEmbeddedGroup before reusing the design.