Skip to the content
2 layers35 × 37 mmAVRist watch, the printed circuit board in 3D

⌚ An ATmega328P controlling a small OLED display powered by a chargable LiPo battery.

Size
35 × 37 mm
Copper layers
2
Thickness
1.6 mm
Parts
28
Nets
49
Pads
135
Tracks, vias
182, 21
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
17 Nov 2018
Updated
3 Oct 2023

Overview

AVRist watch is an open-source printed circuit board by flonkler, from the flonkler/AVRist-watch repository on GitHub. It is a 2-layer board of 35 × 37 mm with 28 parts on 49 nets, routed with 182 tracks and 21 vias.

It is built around the ATMEGA328P-AU, DMN2053UVT and DS3231MZ/V+, with the SSSS811101 among its other parts. Its parts include 6 capacitors, 5 resistors, 5 ICs, 4 connectors and 3 switches. It belongs with the power and lEDs and displays boards and the AVR (ATmega, ATtiny) boards of this library.

Main components

4

README

README.md

AVRist-watch

A DIY project that involves an ATmega328p that controlls a small monochrome OLED display powered by a chargable LiPo battery - or in short: a digital wrist watch.

Features

  • Real Time Clock: An IC keeps track of the current date and time even if the display and microcontroller is turned off.

  • Li-Po battery management: The board features a charge controller that allows charging the battery via Micro USB. Another IC protects the battery from over-charging and over-discharging.

  • OLED-Display: A monochrome 128x64 pixel OLED display is used to show the current time.

  • Energy Efficiency: After displaying the current time for a couple of seconds the display turns off and the microcontroller enters a sleep mode. This saves battery power.

Images

PCB up close

PCB with OLED display on top

Schematic

Schematic

Parts

28
QtyValueFootprintReferences
4100nCapacitor_SMD:C_0603_1608MetricC2, C4, C5, C6
210KResistor_SMD:R_0603_1608MetricR2, R3
22.7KResistor_SMD:R_0603_1608MetricR1, R7
24.7uCapacitor_SMD:C_0603_1608MetricC1, C3
2SW_DIP_x01pcb:TL3340_SMTSW2, SW3
1330Resistor_SMD:R_0603_1608MetricR5
1AP9101CK6pcb:AP9101C_SOT-25U3
1ATmega328P-AUPackage_QFP:TQFP-32_7x7mm_P0.8mmU1
1AVR ISP connectorpcb:CONN_AVR_ISP_SMDJ2
1Conn_01x02_MaleConnector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_VerticalJ4
1DMN2053UVTpcb:DMN2053UVT_TSOT-26U4
1DS3231MZPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU5
1Display connectorConnector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ3
1LEDLED_SMD:LED_0805_2012MetricD1
1MCP73831-2-OTpcb:MCP73831_SOT-23U2
1SSSS811101pcb:SSSS811101SW1
1USB_B_Micropcb:USB_B_microJ1

The 24 most common of 28 parts.

Similar boards

  • 4 layers98.5 × 193.5 mmSchematics, the printed circuit board in 3D

    Schematics

    apistol78/retrodack

    RetroDäck, handheld game console

    120 parts1MPL-2.0
  • 2 layers68 × 55 mmAurdino oled. sd card, the printed circuit board in 3D

    Aurdino oled. sd card

    ayodhyaphanidurgaprasad-source/PCB-Projects

    Designed a 2-layer PCB that converts USB to EtherCAT for industrial network communication. Worked on the complete design flow — schematic design, component selection, PCB layout, and routing in KiCad.

    66 parts
  • 2 layers100 × 100 mmRoundClock, the printed circuit board in 3D

    RoundClock

    cawapy/RoundClock

    KiCad schematics and PCB for building a VFD clock

    359 parts
  • 2 layers44.5 × 57.8 mmControlBoard rev05a, the printed circuit board in 3D

    ControlBoard rev05a

    plertvilai/IPAX

    In situ Plankton Assemblage eXplorer

    64 parts7MIT
  • 2 layers50 × 70 mmLcdtap rp2350, the printed circuit board in 3D

    Lcdtap rp2350

    shapoco/lcdtap

    A tool for mirroring or capturing I2C/SPI LCD displays

    100 parts85
  • 4 layers66.9 × 87 mmMeshtasticNode BQ25185, the printed circuit board in 3D

    MeshtasticNode BQ25185

    h0lad/SolarMeshtasticNode

    This is a Meshtastic Solar Node PCB based on the Heltec HT-CT62 and the linear solar charge controller TI BQ25185.

    49 parts40CERN-OHL-S-2.0
  • 4 layers110 × 64 mmSYCL Badge 2024, the printed circuit board in 3D

    SYCL Badge 2024

    ZigEmbeddedGroup/sycl-badge

    The badge for the SYCL conference! https://zigembeddedgroup.github.io/sycl-badge/

    145 parts39

Questions

How big is the AVRist watch PCB?

It measures 35 × 37 mm and has 2 copper layers, 1.6 mm thick.

What parts does the AVRist watch use?

28 parts, built around the ATMEGA328P-AU, DMN2053UVT, DS3231MZ/V+ and SSSS811101. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the AVRist watch KiCad files?

From the flonkler/AVRist-watch repository on GitHub, at the commit this page was made from: the board is pcb/pcb.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the AVRist watch design in my own project?

Its repository states no licence, so its author keeps all rights: ask flonkler before reusing the design.