

Buck vcc
PCB sample for prototypes
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 33
- Nets
- 18
- Pads
- 94
- Tracks, vias
- 119, 10
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 22 Jun 2019
- Updated
- 17 Apr 2022
Overview
Buck vcc is an open-source printed circuit board by fgl27, from the fgl27/pcb repository on GitHub. It is a 2-layer board with 33 parts on 18 nets, routed with 119 tracks and 10 vias.
It is built around the TC4420CPA and IRLZ44N. Its parts include 10 connectors, 6 capacitors, 6 resistors, 2 ICs and 2 diodes. It belongs with the power boards of this library.
Main components
2README
README.mdpcb
This is a collection of PCBs prototypes for projects that I have created off participated.
If anything here help you enjoy it.
Parts
33| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | Conn_01x01_Male | Connector_PinHeader_1.00mm:PinHeader_1x01_P1.00mm_Vertical | J1, J2, J3, J4, J5 |
| 4 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6, R8, R9, R11 |
| 2 | 10u | Capacitor_THT:C_Disc_D10.5mm_W5.0mm_P10.00mm | C5, C6 |
| 2 | Analog | Socket_Arduino_Mega:Socket_Strip_Arduino_1x08 | P3, P4 |
| 2 | Heatsink | Heatsink:Heat_Sink_40_40 | HS1, HS2 |
| 2 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mm | J_in1, J_out1 |
| 1 | 0.1u | Capacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C3 |
| 1 | 1000u | Capacitor_THT:C_Radial_D12.5mm_H20.0mm_P5.00mm | C4 |
| 1 | 100K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7 |
| 1 | 1n | Capacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C2 |
| 1 | 2200u | Capacitor_THT:C_Radial_D16.0mm_H25.0mm_P7.50mm | C1 |
| 1 | 47R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | ACS730xLCTR-50AB | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | DIODE | Diode_THT:D_DO-41_SOD81_P12.70mm_Horizontal | D1 |
| 1 | D_Schottky_AKA | Package_TO_SOT_THT:TO-220-3_Vertical | D3_buck1 |
| 1 | Digital | Socket_Arduino_Mega:Socket_Strip_Arduino_2x18 | ARDUINO DIGITAL I/O |
| 1 | INDUCTOR | Inductor_THT:L_Toroid_Vertical_L19.1mm_W8.1mm_P7.10mm_Bourns_5700 | L1 |
| 1 | IRLZ44N | Package_TO_SOT_THT:TO-220-3_Vertical | Q1_buck1 |
| 1 | PWM | Socket_Arduino_Mega:Socket_Strip_Arduino_1x10 | P5 |
| 1 | PWM | Socket_Arduino_Mega:Socket_Strip_Arduino_1x08 | P6 |
| 1 | Power | Socket_Arduino_Mega:Socket_Strip_Arduino_1x08 | P2 |
| 1 | TC4420CPA | DIP254P762X533-8 | U1 |
More from fgl27/pcb
12- 2 layers

- 2 layers

- 2 layers

- 2 layers

- 2 layers

- 2 layers

- 2 layers

- 2 layers

- 2 layers

- 2 layers

- 2 layers

- 2 layers

Similar boards
- 4 layers100 × 57 mm

- 2 layers86.4 × 70.5 mm

Adjustable Load v1.1
kholia/Adjustable-Load-v1.1
Easy + Cost-Effective Variable Electronic Load.
20 parts8 - 4 layers59 × 71 mm

PEC Sensor
WAFFLE-Systems/PEC_Sensor
Electrical schematics and PCB gerber files for the Pulsed Eddy Current Sensor
98 parts1 - 2 layers97 × 79 mm

BciChess boardControlShield
allita99/8x8-LED-Matrix-Control-Circuit
KiCad design files and Gerber outputs for an 8×8 LED matrix controller capable of driving 64 LEDs at 15 V.
72 parts - 2 layers85 × 72 mm

Qcw board
arsinovgleb5-create/Mikola_Tesla-QCW-DRSSTC-controller
QCW DRSSTC controller: ESP32 ramp generator + interrupter, CYD ramp display, single-sided control board. CC BY 4.0
34 parts - 2 layers142.2 × 49.5 mm

- 2 layers110 × 80 mm

Alarm Panel
garyt72/Alarm-Panel
The current config is based on the ideaspark ESP32 0.96in OLED board used for the alarm-panel-oled device. It uses an SSD1306 128x64 OLED on I2C GPIO21/GPIO22 and keeps the alarm-zone inputs and outputs mapped around…
35 partsGPL-3.0 - 2 layers75 × 51.5 mm

Boost Converter
IremAktas95/PowerElectronics_Intern_Tasks
Bu klasör, Boost Converter projesinin KiCad şematik çizimlerini, PCB tasarımını, 3D görsellerini ve Gerber ile BOM dosyalarını içermektedir.
11 parts
Questions
What parts does the Buck vcc use?
33 parts, built around the TC4420CPA and IRLZ44N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Buck vcc KiCad files?
From the fgl27/pcb repository on GitHub, at the commit this page was made from: the board is buck_vcc/buck_vcc.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Buck vcc design in my own project?
Its repository states no licence, so its author keeps all rights: ask fgl27 before reusing the design.