
VCU3.0
Obili69/E-GoCart
Vehicle Control Unit (VCU) firmware for an electric go-kart, built on ESP32-S3 with FreeRTOS. Manages motor control, battery management, charging, telemetry, and safety systems over dual CAN buses.

KiCad design files and Gerber outputs for an 8×8 LED matrix controller capable of driving 64 LEDs at 15 V.
BciChess boardControlShield is an open-source printed circuit board by allita99, from the allita99/8x8-LED-Matrix-Control-Circuit repository on GitHub. It is a 2-layer board of 97 × 79 mm with 72 parts on 91 nets, routed with 637 tracks and 64 vias.
It is built around the TC4420CPA, TC4429COA and FSM2JH, with the PJ-096H among its other parts. Its parts include 17 connectors, 5 resistors, 2 diodes, 1 capacitor and 1 IC. It belongs with the lEDs and displays boards of this library.
This repository contains the hardware design files for an 8×8 LED matrix controller capable of driving 64 LEDs at 15 V. The design was created using KiCad and includes all necessary files for review, modification, and fabrication.
KiCad Project Files
Schematic and PCB layout files for editing and further development.
Gerber Files
Ready-to-manufacture files for PCB fabrication.
Images
Rendered views and design previews of the board and schematics.


git clone <your-repo-url>| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | ESD15VT2-TP | ESD15VT2-TP:SOT95P237X125-3N | T0, T1, T2, T3, T4, T5, T6, T7, T8, T10, T11, T12, T13, T14, T15, T16 +1 |
| 8 | DMN3009SSS-13 | tc4420:SOIC127P600X175-8N | N1, N2, N3, N4, N5, N6, N7, N8 |
| 8 | SI4101DY-T1-GE3 | tc4420:SOIC127P600X175-8N | P1, P2, P3, P4, P5, P6, P7, P8 |
| 8 | TC4420 | tc4420:SOIC127P600X175-8N | DR1, DR2, DR3, DR4, DR5, DR6, DR7, DR8 |
| 8 | TC4429 | tc4420:SOIC127P600X175-8N | DI1, DI2, DI3, DI4, DI5, DI6, DI7, DI8 |
| 4 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2, J5, J7, J8 |
| 4 | R | Resistor_SMD:R_1210_3225Metric | R1, R2, R3, R4 |
| 2 | Screw_Terminal_01x08 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J4, J6 |
| 2 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP9, TP10 |
| 1 | 0031.8221 | fuseHolder:00318221 | U1 |
| 1 | C_Polarized | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J10 |
| 1 | Conn_02x09_Row_Letter_First | pinheaders:PinHeader_2x09_P2.54mm_Vertical | J1 |
| 1 | FSM2JH | FSM2JH:FSM4JH | S1 |
| 1 | LED | LED_THT:LED_D5.0mm | D66 |
| 1 | LED | LED_SMD:LED_1210_3225Metric_Pad1.42x2.65mm_HandSolder | D65 |
| 1 | PJ-096H | PJ_096H:SAMESKY_PJ-096H | J3 |
| 1 | R | Resistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R5 |
The 70 most common of 72 parts.

Obili69/E-GoCart
Vehicle Control Unit (VCU) firmware for an electric go-kart, built on ESP32-S3 with FreeRTOS. Manages motor control, battery management, charging, telemetry, and safety systems over dual CAN buses.


kholia/Adjustable-Load-v1.1
Easy + Cost-Effective Variable Electronic Load.

WAFFLE-Systems/PEC_Sensor
Electrical schematics and PCB gerber files for the Pulsed Eddy Current Sensor

arsinovgleb5-create/Mikola_Tesla-QCW-DRSSTC-controller
QCW DRSSTC controller: ESP32 ramp generator + interrupter, CYD ramp display, single-sided control board. CC BY 4.0


garyt72/Alarm-Panel
The current config is based on the ideaspark ESP32 0.96in OLED board used for the alarm-panel-oled device. It uses an SSD1306 128x64 OLED on I2C GPIO21/GPIO22 and keeps the alarm-zone inputs and outputs mapped around…

IremAktas95/PowerElectronics_Intern_Tasks
Bu klasör, Boost Converter projesinin KiCad şematik çizimlerini, PCB tasarımını, 3D görsellerini ve Gerber ile BOM dosyalarını içermektedir.
It measures 97 × 79 mm and has 2 copper layers, 1.6 mm thick.
72 parts, built around the TC4420CPA, TC4429COA, FSM2JH and PJ-096H. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the allita99/8x8-LED-Matrix-Control-Circuit repository on GitHub, at the commit this page was made from: the board is bciChess_boardControlShield.kicad_pcb and its schematic bciChess_boardControlShield.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask allita99 before reusing the design.