

Boost Converter
Bu klasör, Boost Converter projesinin KiCad şematik çizimlerini, PCB tasarımını, 3D görsellerini ve Gerber ile BOM dosyalarını içermektedir.
- Size
- 75 × 51.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 11
- Nets
- 9
- Pads
- 29
- Tracks, vias
- 35, 3
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 29 Jun 2026
- Updated
- 11 Jul 2026
Overview
Boost Converter is an open-source printed circuit board by IremAktas95, from the IremAktas95/PowerElectronics_Intern_Tasks repository on GitHub. It is a 2-layer board of 75 × 51.5 mm with 11 parts on 9 nets, routed with 35 tracks and 3 vias.
It is built around the TC4420CPA. Its parts include 4 connectors, 2 resistors, 1 capacitor, 1 IC and 1 diode. It belongs with the power boards of this library.
Main components
1README
Hardware/README.mdBu klasör, Boost Converter projesinin KiCad şematik çizimlerini, PCB tasarımını, 3D görsellerini ve Gerber ile BOM dosyalarını içermektedir.
Parts
11| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | Conn_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J1, J2, J3 |
| 1 | 10R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 10uf | Capacitor_THT:C_Rect_L26.5mm_W8.5mm_P22.50mm_MKS4 | C1 |
| 1 | 24R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 33uH | Library:proje_bobin | L1 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | D_Schottky | Package_TO_SOT_THT:TO-220-2_Vertical | D1 |
| 1 | NMOS | Package_TO_SOT_THT:TO-220-3_Vertical | Q1 |
| 1 | TC4420CPA | Package_DIP:DIP-8_W7.62mm | U1 |
Similar boards
- 4 layers100 × 57 mm

- 2 layers86.4 × 70.5 mm

Adjustable Load v1.1
kholia/Adjustable-Load-v1.1
Easy + Cost-Effective Variable Electronic Load.
20 parts8 - 4 layers59 × 71 mm

PEC Sensor
WAFFLE-Systems/PEC_Sensor
Electrical schematics and PCB gerber files for the Pulsed Eddy Current Sensor
98 parts1 - 2 layers97 × 79 mm

BciChess boardControlShield
allita99/8x8-LED-Matrix-Control-Circuit
KiCad design files and Gerber outputs for an 8×8 LED matrix controller capable of driving 64 LEDs at 15 V.
72 parts - 2 layers85 × 72 mm

Qcw board
arsinovgleb5-create/Mikola_Tesla-QCW-DRSSTC-controller
QCW DRSSTC controller: ESP32 ramp generator + interrupter, CYD ramp display, single-sided control board. CC BY 4.0
34 parts - 2 layers142.2 × 49.5 mm

- 2 layers110 × 80 mm

Alarm Panel
garyt72/Alarm-Panel
The current config is based on the ideaspark ESP32 0.96in OLED board used for the alarm-panel-oled device. It uses an SSD1306 128x64 OLED on I2C GPIO21/GPIO22 and keeps the alarm-zone inputs and outputs mapped around…
35 partsGPL-3.0 - 2 layers90 × 100 mm

Questions
How big is the Boost Converter PCB?
It measures 75 × 51.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Boost Converter use?
11 parts, built around the TC4420CPA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Boost Converter KiCad files?
From the IremAktas95/PowerElectronics_Intern_Tasks repository on GitHub, at the commit this page was made from: the board is Hardware/Boost_Converter.kicad_pcb and its schematic Hardware/Boost_Converter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Boost Converter design in my own project?
Its repository states no licence, so its author keeps all rights: ask IremAktas95 before reusing the design.