

Power ELect
- Size
- 90 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 35
- Nets
- 39
- Pads
- 107
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 21 Apr 2025
- Updated
- 21 Apr 2025
Overview
Power ELect is an open-source printed circuit board by knx444, from the knx444/rarara repository on GitHub. It is a 2-layer board of 90 × 100 mm with 35 parts on 39 nets.
It is built around the ATMEGA8A-PU, TC4420CPA and FSM8JH, with the HC-49US 16.000MHZ, IRFP450 and MUR860 among its other parts. Its parts include 5 ICs, 2 diodes, 1 capacitor, 1 transistor and 1 switch. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
6ATMEGA8A-PU
DIP-28-300mil-40℃~+85℃ 10bit 16MHz 1KB 2.7V~5.5V 23 512Byte 8 Bit 8KB AVR Built-in FLASH DIP-28-300mil Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)TC4420CPA
PDIP-80℃~+150℃ 1 25ns 25ns 4.5V~18V 450uA 6A 6A MOSFET PDIP-8 Gate Drivers ROHSMicrochip TechnologyGate DriversFSM8JH
插件-35℃~+85℃ 1.6N 3.5mm 6mm SPST Through Hole 插件 Tactile Switches ROHSTE ConnectivityTactile SwitchesHC-49US 16.000MHZ
UncategorisedUnknown makerIRFP450
TO-247MOSFETsMinosMUR860
TO-220-2-65℃~+175℃ 1 Independent 1.5V@8A 100A 10uA@600V 600V 60ns 8A TO-220-2 Fast Recovery / High Efficiency Diodes ROHSonsemiFast Recovery / High Efficiency Diodes
README
README.mdrarara
Parts
35| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10K | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | OCPd1, SPd1, VDiv2 |
| 2 | 10 | Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal | CLim1, GCLim1 |
| 2 | 10uF | Capacitor_THT:C_Radial_D6.3mm_H5.0mm_P2.50mm | CLIn1, CLOu1 |
| 2 | 2.2uF | Library:C_Rect_L22.0mm_W10.0mm_P20.00mm_MKS4 | COu1, COu2 |
| 2 | C | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | c_Crystal1, c_Crystal2 |
| 1 | 1.5uF | Library:C_Rect_L15mm_W10mm_P16.00mm_MKT | CIn1 |
| 1 | 100K | Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal | RSTPu1 |
| 1 | 100nF | Capacitor_THT:C_Disc_D10.0mm_W2.5mm_P5.00mm | C6 |
| 1 | 10K | Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal | GatePd1 |
| 1 | 1K | Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal | CLim3 |
| 1 | 500 | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | CLim2 |
| 1 | 940K | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | VDiv1 |
| 1 | ATmega8A-P | Package_DIP:DIP-28_W7.62mm | U6 |
| 1 | C | Capacitor_THT:C_Radial_D5.0mm_H11.0mm_P2.00mm | AREF_C1 |
| 1 | FSM8JH | FSM8JH:SW_FSM8JH | S1 |
| 1 | HC-49US_16.000MHZ | HC-49US_16.000MHZ:XTAL_HC-49US-16.000MHZ | Y2 |
| 1 | Heatsink_Pad | Library:Heatsink_45x15mm_2xFixation3mm | HS1 |
| 1 | IRFP450 | Package_TO_SOT_THT:TO-247-3_Vertical | Q2 |
| 1 | J1 | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type094_RT03502HBLU_1x02_P5.00mm_Horizontal | 120VIn1 |
| 1 | J2 | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type094_RT03502HBLU_1x02_P5.00mm_Horizontal | 3.3mHIn1 |
| 1 | J3 | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type094_RT03502HBLU_1x02_P5.00mm_Horizontal | 240VOu1 |
| 1 | J4 | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type094_RT03502HBLU_1x02_P5.00mm_Horizontal | 12VIn1 |
| 1 | LED | LED_THT:LED_D5.0mm | D1 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U3 |
| 1 | LOGO | Library:nitc_logo | G*** |
| 1 | MUR860 | MUR860:TO508P1050X476X2020-2 | D2 |
| 1 | PC817 | Package_DIP:DIP-4_W7.62mm | U1 |
| 1 | TC4420 | Package_DIP:DIP-8_W7.62mm | U5 |
| 1 | TL431LP | Package_TO_SOT_THT:TO-92_Inline | U4 |
Similar boards
- 2 layers48 × 48 mm

- 2 layers99.5 × 99.5 mm

Carico elettronico
dario0603/electronic_load
Un progetto open-source per la progettazione e simulazione di un Carico Elettronico Bipolare (Electronic Load), ideato per il test e la caratterizzazione di alimentatori, batterie e circuiti di potenza.
92 parts - 2 layers219 × 135.5 mm

- 2 layers80 × 40 mm

- 2 layers137.2 × 66 mm

- 2 layers280 × 120 mm

Softstart
Synthron/SymAsym
High Power Audio Amplifier based on the Red Devil SymAsym PCBs from audiopcb.de
94 parts2 - 2 layers100 × 100 mm

PCB Conversor
LManuC/ProyectoFinal-Grupo5-VariadorDeFrecuencia
Variador de frecuencia para motores de 1/3HP trifásicos de 0-500Hz
90 parts - 2 layers206.1 × 150.5 mm

Questions
How big is the Power ELect PCB?
It measures 90 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Power ELect use?
35 parts, built around the ATMEGA8A-PU, TC4420CPA, FSM8JH and HC-49US 16.000MHZ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Power ELect KiCad files?
From the knx444/rarara repository on GitHub, at the commit this page was made from: the board is Power_ELect.kicad_pcb and its schematic Power_ELect.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Power ELect design in my own project?
Its repository states no licence, so its author keeps all rights: ask knx444 before reusing the design.