Skip to the content
12

MUR860

onsemiExtended

-65℃~+175℃ 1 Independent 1.5V@8A 100A 10uA@600V 600V 60ns 8A TO-220-2 Fast Recovery / High Efficiency Diodes ROHS

Part id
onsemi/MUR860
Category
Fast Recovery, High Efficiency Diodes
Package
TO-220-2
Pins
2
In stock
7,078 at JLCPCB (C50428)
Used on
9 open-source boards

Overview

The MUR860 is a fast Recovery, High Efficiency Diode made by onsemi in a TO-220-2 package with 2 pins. -65℃~+175℃ 1 Independent 1.5V@8A 100A 10uA@600V 600V 60ns 8A TO-220-2 Fast Recovery / High Efficiency Diodes ROHS.

PCBKit's library has its KiCad symbol (Device:D, from KiCad's library) and its footprint (Package_TO_SOT_THT:TO-220-2_Vertical, from KiCad's library), ready for a KiCad board. 7,078 are in stock at JLCPCB (part C50428). 9 open-source boards in 8 repositories on GitHub use it.

Symbol

Device:DFrom KiCad's library

Footprint

12
Package_TO_SOT_THT:TO-220-2_VerticalFrom KiCad's library

Pinout

2
The pins of the MUR860
PinNameType
1KPassive
2APassive

Open-source boards using it

9See all 9
  • 2 layers99.5 × 99.5 mmCarico elettronico, the printed circuit board in 3D

    Carico elettronico

    dario0603/electronic_load

    Un progetto open-source per la progettazione e simulazione di un Carico Elettronico Bipolare (Electronic Load), ideato per il test e la caratterizzazione di alimentatori, batterie e circuiti di potenza.

    92 parts
  • 2 layers219 × 135.5 mm463 term project, the printed circuit board in 3D

    463 term project

    EE463-Project-Group/EE463-Hardware-Project-2025

    141 parts
  • 2 layers80 × 40 mmTest2, the printed circuit board in 3D

    Test2

    HydrogreenPollub/pcb-fuel-cell-module

    Current sensors, FC short and Current control

    25 partsMIT
  • 2 layers90 × 100 mmPower ELect, the printed circuit board in 3D

    Power ELect

    knx444/rarara

    35 parts
  • 2 layers137.2 × 66 mmAudioModTC, the printed circuit board in 3D

    AudioModTC

    maxschommer/AudioModulatedTC

    A PCB for an audio modulated tesla coil.

    139 partsMIT
  • 2 layers280 × 120 mmSoftstart, the printed circuit board in 3D

    Softstart

    Synthron/SymAsym

    High Power Audio Amplifier based on the Red Devil SymAsym PCBs from audiopcb.de

    94 parts2
  • 2 layers100 × 100 mmPCB Conversor, the printed circuit board in 3D

    PCB Conversor

    LManuC/ProyectoFinal-Grupo5-VariadorDeFrecuencia

    Variador de frecuencia para motores de 1/3HP trifásicos de 0-500Hz

    90 parts
  • 2 layers206.1 × 150.5 mmToPrint, the printed circuit board in 3D

    ToPrint

    sangseu/kicad

    202 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the MUR860?

Yes. The symbol is Device:D and the footprint Package_TO_SOT_THT:TO-220-2_Vertical, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MUR860?

TO-220-2, with 2 pins. Its footprint is drawn on this page.

Where is the MUR860 datasheet?

onsemi publishes it: the Datasheet link on this page opens it.

Where can I order the MUR860?

JLCPCB lists it as part C50428, with 7,078 in stock; the sellers' links on this page open their listings.

What can replace the MUR860?

Parts like it in the library: the MUR1560 by onsemi, the RHRP15120-F102 by onsemi, the STTH8L06FP by STMicroelectronics and the DSEP29-06A by Littelfuse/IXYS. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MUR860?

9 boards in 8 repositories on GitHub; the most starred are listed on this page, with their KiCad files.