2 layers
2 layers
Boost 311v
fgl27/pcbPCB sample for prototypes
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 61
- Nets
- 38
- Pads
- 142
- Tracks, vias
- 332, 11
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 22 Jun 2019
- Updated
- 17 Apr 2022
Overview
Boost 311v is an open-source printed circuit board by fgl27, from the fgl27/pcb repository on GitHub. It is a 2-layer board with 61 parts on 38 nets, routed with 332 tracks and 11 vias.
It is built around the L7812, NE555 and FR154, with the PN2222A, BC556 and IRFP260N among its other parts. Its parts include 20 resistors, 16 capacitors, 7 transistors, 5 diodes and 4 ICs.
Main components
6
L7812
TO-220ST0℃~+125℃@(Tj) 1 1.2A 12V 2V@(1A) 30V 71dB@(120Hz) 76uV Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
NE555
SOP-8-20℃~+70℃ 1 1.5mA 200mA 4.5V~15V Adjustable duty cycle oscillation、Reset function、Duty cycle stabilization SOP-8 555 Timers / Counters ROHSGRTimers / CountersFR154
DO-15-55℃~+150℃ 1 Independent 1.3V@1.5A 1.5A 150ns 400V 5uA 60A DO-15 Fast Recovery / High Efficiency Diodes ROHSLangJieFast Recovery / High Efficiency Diodes
PN2222A
TO-92-3-55℃~+150℃ 1 NPN 1A 300MHz 300mV 40V 625mW NPN TO-92-3 Bipolar (BJT) ROHSNTE ElectronicsBipolar (BJT)BC556
TO-92-55℃~+150℃ 1 PNP 100mA 100nA 150MHz 300mV 5V 625mW 65V 800 PNP TO-92 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
IRFP260N
TO-247MOSFETsMinos
README
README.mdpcb
This is a collection of PCBs prototypes for projects that I have created off participated.
If anything here help you enjoy it.
Parts
61| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100nF | Capacitor_THT:C_Disc_D7.5mm_W5.0mm_P5.00mm | C6, C8, C10, C14, C16 |
| 5 | FR154 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2, D3, D4, D5 |
| 4 | 100kΩ | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6, R7, R16, R18 |
| 4 | 100µF_200V | Capacitor_THT:CP_Radial_D16.0mm_P7.50mm | C3, C7, C9, C11 |
| 4 | 10kΩ | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R9, R11, R15, R17 |
| 4 | 1kΩ | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R4, R14 |
| 3 | PN2222A | Package_TO_SOT_THT:TO-92_Wide | Q2, Q3, Q4 |
| 2 | 200µF_200V | Capacitor_THT:CP_Radial_D22.0mm_P10.00mm_SnapIn | C12, C15 |
| 2 | 22kΩ | Potentiometer_THT:Potentiometer_ACP_CA6-H2,5_Horizontal | TRIM_POT1, TRIM_POT2 |
| 2 | 330kΩ | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R20, R21 |
| 2 | 330Ω | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R8 |
| 1 | 100µ | Inductor_THT:L_Axial_L5.0mm_D3.6mm_P10.00mm_Horizontal_Murata_BL01RN1A2A2 | L2 |
| 1 | 100µF | Capacitor_THT:CP_Radial_D12.5mm_P5.00mm | C1 |
| 1 | 100µF | Capacitor_THT:CP_Radial_D16.0mm_P7.50mm | C2 |
| 1 | 10nF | Capacitor_THT:C_Disc_D7.5mm_W5.0mm_P5.00mm | C4 |
| 1 | 10µF | Capacitor_THT:C_Disc_D7.5mm_W5.0mm_P5.00mm | C13 |
| 1 | 200kΩ | Potentiometer_THT:Potentiometer_Alps_RK163_Single_Horizontal | POT1 |
| 1 | 20µH | Inductor_THT:L_Toroid_Vertical_L21.6mm_W9.1mm_P8.40mm_Bourns_5700 | L1 |
| 1 | 220kΩ | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R22 |
| 1 | 2N3904 | Package_TO_SOT_THT:TO-92_Wide | Q6 |
| 1 | 2N3906 | Package_TO_SOT_THT:TO-92_Wide | Q7 |
| 1 | 470Ω | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5 |
| 1 | 47Ω | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R10 |
| 1 | 4N25 | Package_DIP:DIP-6_W7.62mm | U3 |
| 1 | 500pF | Capacitor_THT:C_Disc_D7.5mm_W5.0mm_P5.00mm | C5 |
| 1 | 80kΩ | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R12 |
| 1 | BC556 | Package_TO_SOT_THT:TO-92_Wide | Q1 |
| 1 | Heatsink | Heatsink:Heatsink_Stonecold_HS-132_32x14mm_2xFixation1.5mm | HS1 |
| 1 | IRFP260 | Package_TO_SOT_THT:TO-247-3_Vertical | Q5 |
| 1 | L7812 | Package_TO_SOT_THT:TO-220-3_Vertical | U2 |
| 1 | LF357 | Package_DIP:DIP-8_W7.62mm_LongPads | U4 |
| 1 | NE555 | Package_DIP:DIP-8_W7.62mm_LongPads | U5 |
| 1 | VO | TerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mm | J2 |
| 1 | Vin_boost | TerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mm | J3 |
| 1 | Vin_cnt | TerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mm | J1 |
More from fgl27/pcb
12- 2 layers
- 2 layers
- 2 layers
- 2 layers
- 2 layers
- 2 layers
- 2 layers
- 2 layers
- 2 layers
- 2 layers
- 2 layers
Similar boards
- 2 layers200 × 66 mm
- 2 layers99.5 × 99.5 mm
ESP32 master
kwiecinski/BMS-and-offgrid-photovoltaic-management-system
Project contains BMS for lead-acid batteries and ESP-based board used to pull information from EASUN offgrid inverter, energy meters and sensors.
155 parts3MIT - 2 layers66 × 41 mm
Plasma Toroid Generator
PJTodd72/Plasma-Toroid-Driver
Version one of the Ki-Cad schematics and PCB layout of the Plasma Toroid generator driver circuits.
15 parts3 - 2 layers256.5 × 172.9 mm
- 2 layers180 × 130 mm
Cell test bench
0hasant/Liion_Cell_Simulator
Single-cell characterization bench for 18650 and 21700 Li-ion cells (DMEGC INR45E, generic 3.5 Ah 18650). Part of the Solaris final-year project.
133 parts - 2 layers86.1 × 66.4 mm
StereoPlasmaSpeakersV2
Firestorm108/Plasma-Speakers-V2
Dual flyback transformers that produce audio through the modulation of high frequency plasma arcs.
72 parts - 2 layers95 × 138 mm
ZVS
jenatton-Malik/zvs-driver
Mazzilli-topology ZVS driver — simulated in LTspice, built on a custom PCB and characterized on the bench
19 partsMIT - 2 layers253 × 74.2 mm
Questions
What parts does the Boost 311v use?
61 parts, built around the L7812, NE555, FR154 and PN2222A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Boost 311v KiCad files?
From the fgl27/pcb repository on GitHub, at the commit this page was made from: the board is boost_311v/boost_311v.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Boost 311v design in my own project?
Its repository states no licence, so its author keeps all rights: ask fgl27 before reusing the design.