

Ece129 discharger
- Size
- 146 × 134.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 114
- Nets
- 136
- Pads
- 436
- Tracks, vias
- 732, 234
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 6 Apr 2026
- Updated
- 23 May 2026
Overview
Ece129 discharger is an open-source printed circuit board by fezboy, from the fezboy/ece129_discharger repository on GitHub. It is a 2-layer board of 146 × 134.3 mm with 114 parts on 136 nets, routed with 732 tracks and 234 vias.
It is built around the CC1R5-1205SR-E, ISO1050DUB and VX7805-500, with the MCP6004-E/P, INA126U/2K5 and CD4052BM among its other parts. Its parts include 45 resistors, 31 capacitors, 19 connectors, 12 ICs and 1 diode.
Main components
8CC1R5-1205SR-E
-- Power Module/Power Supply ROHSTDKPower Supply Module,Power SuppliesISO1050DUB
SOP-8-2.54mm-55℃~+105℃ 1 1Mbps 2500 3V~5.5V 4.75V~5.25V 50kV/us Bus fault detection and protection、Fail-safe SOP-8-2.54mm Isolated CAN Transceivers ROHSTexas InstrumentsIsolated CAN TransceiversVX7805-500
SIP,11.6x7.6mm1 500mA 5V 6.5V~36V 90% SIP,11.6x7.6mm DC-DC Power Modules ROHSCUIDC-DC Power ModulesMCP6004-E/P
PDIP-14-40℃~+125℃ 1.8V~6V 100uA 1MHz 1pA 1pA 23mA 28nV/√Hz@1kHz 2uV/℃ 4 4.5mV 600V/ms 76dB ESD protection Rail-to-Rail Input, Rail-to-Rail Output PDIP-14 Operational Amplifier ROHSMicrochip TechnologyOperational AmplifierINA126U/2K5
SOIC-8-18V~-1.35V、1.35V~18V -40℃~+85℃ 0.2% 0.4V/us 1 10mA 10pA/℃ 175uA 2.7V~36V 250uV 25nA 30us 35nV/√Hz@1kHz 3uV/℃ 500pA 5V/V~10000V/V 83dB External resistor gain、Overvoltage protection Single-Ended SOIC-8 Instrumentation Amplifiers ROHSTexas InstrumentsInstrumentation AmplifiersCD4052BM
SOP-16-55℃~+125℃ 15ns 2 40MHz 4:1 5V~15V 80Ω Level shifting SOP-16 Analog Switches, Multiplexers ROHSJSMSEMIAnalog Switches, MultiplexersSN74LVC1T45DBV
SOT-23-6-40℃~+85℃ 1 1 1.65V~5.5V 1.65V~5.5V 420Mbps Bidirectional Tri-State SOT-23-6 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level ShiftersAO3400A
SOT-23-55℃~+150℃ 1 N-channel 1.45V 1.4W 30V 48mΩ@2.5V 5.7A 50pF 630pF 75pF 7nC@10V N-Channel SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs
Parts
114| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R7, R8, R12, R13, R14, R15, R18, R19, R24, R44, R51, R52 |
| 13 | Conn_01x02 | Connector_Molex:Molex_Nano-Fit_105309-xx02_1x02_P2.50mm_Vertical | J2, J3, J4, J5, J6, J7, J8, J9, J10, J14, J17, J18, J20 |
| 8 | 100uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4, C5, C6, C7, C8 |
| 7 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C28, C29, C34, C35, C36, C37, C38 |
| 6 | 6.8k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R45, R46, R53, R54, R61, R62 |
| 4 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C11, C12, C13, C14 |
| 4 | 56k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9, R10, R20, R21 |
| 3 | MCP6004 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U3, U4, U15 |
| 2 | 0.22uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C22, C23 |
| 2 | 0.82k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R27, R33 |
| 2 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R16 |
| 2 | 10nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C27, C31 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C25, C33 |
| 2 | 200k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11, R22 |
| 2 | 47nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C26, C30 |
| 2 | 510k 0805 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R47, R48 |
| 2 | 8.2k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R50, R55 |
| 2 | Conn_01x08 | Connector_Molex:Molex_Nano-Fit_105309-xx08_1x08_P2.50mm_Vertical | J12, J16 |
| 2 | Conn_02x05_Top_Bottom | Connector_Molex:Molex_Nano-Fit_105310-xx10_2x05_P2.50mm_Vertical | J11, J13 |
| 2 | RVar | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | R6, R17 |
| 1 | 100 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R23 |
| 1 | 102k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R57 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C32 |
| 1 | 10uF (50V) | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9 |
| 1 | 130k 0.5% | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R56 |
| 1 | 1N4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | 2.2k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R60 |
| 1 | 22uF (10V) | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C10 |
| 1 | 360 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R59 |
| 1 | 4.7nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C24 |
| 1 | 6N137 | Package_DIP:DIP-8_W7.62mm | U17 |
| 1 | 7.15k 0805 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R49 |
| 1 | 976k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R58 |
| 1 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | CC1R5-1205SR-E | discharger:CC1R5-1205SR-E | U9 |
| 1 | CD4052B | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U5 |
| 1 | Conn_01x03 | Connector_Molex:Molex_Nano-Fit_105309-xx03_1x03_P2.50mm_Vertical | J1 |
| 1 | Conn_01x04 | Connector_Molex:Molex_Nano-Fit_105309-xx04_1x04_P2.50mm_Vertical | J19 |
| 1 | HV- | TestPoint:TestPoint_Keystone_5015_Micro_Mini | TP1 |
| 1 | HV_Mod | TestPoint:TestPoint_Keystone_5015_Micro_Mini | TP2 |
| 1 | HV_PWM | TestPoint:TestPoint_Keystone_5015_Micro_Mini | TP3 |
| 1 | HV_Sense_buf | TestPoint:TestPoint_Keystone_5015_Micro_Mini | TP4 |
| 1 | INA126U/2K5 | Package_SO:SOIC-8_5.3x6.2mm_P1.27mm | U13 |
| 1 | ISO1050DUB | Package_SO:SOP-8_6.62x9.15mm_P2.54mm | U7 |
| 1 | LTC6992CS6-2-TRMPBF | Package_TO_SOT_SMD:TSOT-23-6 | U16 |
| 1 | NUCLEO-H503RB | discharger:NUCLEO-H503RB | U1 |
| 1 | SN74LVC1T45DBV | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | VX7805-500 | Converter_DCDC:Converter_DCDC_TRACO_TSR0.5-24xx_TSR0.5-24xxx_THT | U6 |
The 113 most common of 114 parts.
More from fezboy/ece129_discharger
1- 2 layers103 × 116.3 mm

Similar boards
- 2 layers145.3 × 72.6 mm

Power Electronics Board
formulaslug/fs-4-schematics
Electrical Design Repository for fs-4 schematics and PCBs
71 parts7 - 4 layers189.4 × 59.1 mm

- 4 layers80 × 70 mm

Jellyfish
wntrblm/jellyfish-and-starfish
Jellyfish and Starfish are control boards designed for use with the LumenPnP. Starfish controls the base of the machine including X & Y axes and pneumatics.
172 parts112 - 2 layers80 × 95 mm

LaserBoard
matthewSorensen/pewpew-laserboard
LaserBoard is an open source controller for fiber laser marking systems, based around a Teensy 4.1 MCU board. LaserBoard provides a USB interface compatible with most low-cost fiber laser sources and XY-100-speaking…
123 parts10CERN-OHL-S-2.0 - 2 layers100 × 30 mm

- 2 layers127 × 91.5 mm

Accumulator Board
formulaslug/fs-3-schematics
Electrical Design Repository for fs-3 schematics and PCBs
110 parts5 - 2 layers160 × 124.7 mm

- 4 layers95 × 95 mm

APEX v0
NANDHA0804/Apex-Diagnostic-Tool-V1
Hardware design and manufacturing files for Project Apex V1.0: a multi-functional diagnostic tool. Features a custom 4-layer PCB architecture driven by an ESP32 master and ATmega328P co-processor for high-performance…
146 parts
Questions
How big is the Ece129 discharger PCB?
It measures 146 × 134.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ece129 discharger use?
114 parts, built around the CC1R5-1205SR-E, ISO1050DUB, VX7805-500 and MCP6004-E/P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ece129 discharger KiCad files?
From the fezboy/ece129_discharger repository on GitHub, at the commit this page was made from: the board is hardware/ece129_discharger.kicad_pcb and its schematic hardware/ece129_discharger.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ece129 discharger design in my own project?
Its repository states no licence, so its author keeps all rights: ask fezboy before reusing the design.