Skip to the content

Boards by felixheld

12 boards

Open-source boards designed in KiCad by felixheld on GitHub, from 2 repositories. A board’s address here is its repository’s there.

  • 4 layers58 × 38 mmQspimux2-prog, the printed circuit board in 3D

    Qspimux2-prog

    felixheld/qspimux

    QSPI flash multiplexer - connect a SPI NOR flash to either an embedded system or a programmer for remote firmware tests

    99 parts57CC-BY-SA-4.0
  • 4 layers62.6 × 56.9 mmAXIOM photonSDI hw, the printed circuit board in 3D

    AXIOM photonSDI hw

    felixheld/AXIOM-photonSDI-hw

    SDI interface board for the apertus° AXIOM beta camera

    250 parts13CC-BY-SA-4.0
  • 2 layers14.8 × 11.3 mmBoard adapter DIP8, the printed circuit board in 3D

    Board adapter DIP8

    felixheld/qspimux

    QSPI flash multiplexer - connect a SPI NOR flash to either an embedded system or a programmer for remote firmware tests

    3 parts57CC-BY-SA-4.0
  • 2 layers10.2 × 10.7 mmBoard adapter DIP8-rev2, the printed circuit board in 3D

    Board adapter DIP8-rev2

    felixheld/qspimux

    QSPI flash multiplexer - connect a SPI NOR flash to either an embedded system or a programmer for remote firmware tests

    2 parts57CC-BY-SA-4.0
  • 2 layers8 × 6 mmBoard adapter SOIC8W, the printed circuit board in 3D

    Board adapter SOIC8W

    felixheld/qspimux

    QSPI flash multiplexer - connect a SPI NOR flash to either an embedded system or a programmer for remote firmware tests

    9 parts57CC-BY-SA-4.0
  • 2 layers11.2 × 8.5 mmFlash adapter SOIC8W, the printed circuit board in 3D

    Flash adapter SOIC8W

    felixheld/qspimux

    QSPI flash multiplexer - connect a SPI NOR flash to either an embedded system or a programmer for remote firmware tests

    3 parts57CC-BY-SA-4.0
  • 2 layers11.2 × 11.6 mmFlash adapter SOIC16, the printed circuit board in 3D

    Flash adapter SOIC16

    felixheld/qspimux

    QSPI flash multiplexer - connect a SPI NOR flash to either an embedded system or a programmer for remote firmware tests

    3 parts57CC-BY-SA-4.0
  • 2 layers24.8 × 13.8 mmQspimux, the printed circuit board in 3D

    Qspimux

    felixheld/qspimux

    QSPI flash multiplexer - connect a SPI NOR flash to either an embedded system or a programmer for remote firmware tests

    16 parts57CC-BY-SA-4.0
  • 4 layers14 × 23.2 mmQspimux2, the printed circuit board in 3D

    Qspimux2

    felixheld/qspimux

    QSPI flash multiplexer - connect a SPI NOR flash to either an embedded system or a programmer for remote firmware tests

    13 parts57CC-BY-SA-4.0
  • 2 layers22.3 × 14 mmQspimux2-pinheader adapter, the printed circuit board in 3D

    Qspimux2-pinheader adapter

    felixheld/qspimux

    QSPI flash multiplexer - connect a SPI NOR flash to either an embedded system or a programmer for remote firmware tests

    5 parts57CC-BY-SA-4.0