Skip to the content
2 layers50 × 43.3 mmAntenna mic, the printed circuit board in 3D

Polygon pcb designs for polyhedra

Size
50 × 43.3 mm
Copper layers
2
Thickness
0.8 mm
Parts
25
Nets
27
Pads
130
Tracks, vias
321, 29
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
9 Apr 2026
Updated
13 Sep 2026

Overview

Antenna mic is an open-source printed circuit board by feefladder, from the feefladder/poly-pcb repository on GitHub. It is a 2-layer board of 50 × 43.3 mm with 25 parts on 27 nets, routed with 321 tracks and 29 vias.

It is built around the ESP32-C3-WROOM-02-H4, AMS1117-3.3 and SK6812, with the AO3401A and ICS-43434 among its other parts. Its parts include 7 capacitors, 5 diodes, 4 connectors, 3 resistors and 2 ICs. It belongs with the radio and wireless boards and the ESP32 and RISC-V boards of this library.

Main components

5

README

README.md

Johnson solid lamps!

animation of triangular hebesphenorotunda lamp

So I thought it'd be superduper cool to make lamps as like johnson solids, so here's some kicad files for that.

There's two versions for each polygon:

  1. solder mask only.
  2. Solder mask and edge cuts

So you can create directional lamps with soft light in the facing direction using the pcb as diffuser adn stronger light in the backfacing direction.

More will be added once a lamp is actually made

Exporting for jlpcb

Great thanks to FunDeckHermit's pcb exporter. I've slightly modified it so I can run it from the top-level on any file.

upload zip file to jlpcb. It can be that edge cuts don't work. fix in inkscape.

Making mask and edge cuts

mask:

  1. Plot svgs. Set F.Cu, B.Cu to all layers
  2. open F.Cu in inkscape
  3. select all, 2xCtrl-Shift-G, Ctrl-Shift-C, Ctrl-Alt-C, Ctrl-Shift-+ Ctrl-Shift-)
  4. There will be some specs, either:
    • have a great time with the node tool
    • Ctrl-Shift-K to unmerge, select desired polygons, ! to invert selection and delete
  5. save as...
  6. in kicad, Ctrl-Shift-L, enable "place at position 0,0

edge:

  1. Plot svgs. Set F.Cu, B.Cu, Edge.Cuts to all layers
  2. open F.Cu in inkscape
  3. select all, 2xCtrl-Shift-G, Ctrl-Shift-C, Ctrl-Alt-C, Ctrl-Shift-+ 2xCtrl-Shift-)
  4. There will be specs and some tiny gaps/overlaps.
    • fixs specs as before
    • overlaps can be fixed with running Ctrl-Shift-+
    • tiny gaps are equally bad. These require some fun with the node tool
      1. Shift-doubleclick at the narrowest point to place nodes
      2. split
      3. overlapping nodes: box select one, shift-click to get the bottom, then select the other, connect with edge, then merge to one
  5. save as...
  6. in kicad, Ctrl-Shift-L, enable "place at position 0,0

Reflections after making 3 lamps and soldering 350+ LEDs

So yeah, I think I'll really order the next pcbs with the leds assembled

Bending the header pins with a pcb works, but the led next to the header may want a bit of lovd afterwards. I think the flexing causes microfractures or something, but in any case, the leds stop there

overview

  1. Sphenocorona - some leds not working because of flexing breaking solder joints. Somehow it makes noise?
  2. Thawro - perfect! I removed-and-bypassed some leds because I thought they were broken, but turned out it was because of WLED shenanigans
  3. Bilb - smooth rolling

WLED shenanigans

So whenever you set a pattern at boot, the length of the strip is saved in the json at "stop", so whenever increasing strip length, the leds after will not show.

Still not sure which is the best pattern for debugging leds. Solid deffo not, it needs to be changing, because a led that got a "be pink" signal will stay pink without further input. Android is fine, but when the strip setting is much larger, it is not happy. Ideally it'd be some sort of "two-color-twinkle" or something.

howto header pins

general policy: Every bare edge exposes headers. Use a triangle full pcb to bend them in place. You want to bend it so the pcb can be flatter than it needs to be, otherwise angled pins make inserting a headache (especially for later boards).

sharp angles

Sharp dihedral angles make the corner leds collide, resulting in a slightly sad shape. maybe add tiny jumper pads to easily bypass a led.

Control board

Ah yes, so the ESP32-C3-WROOM boards start up in a boot loop. To solve, you have to hold BOOT (GPIO9, next to GND) low and tap EN, as this person on Github said. GPIO9 can be set as "cycle presets" or something, because getting your phone out all the time is sad.

Double-size?

So these lamps are like nice for in a bedroom or toilet, but for living room, make double-size pcbs with two connections so they are also compatible with the others

blrubs

ah yes ws2812s dont like fighting data, so need to cut some data pins to avoid that.

Parts

25
QtyValueFootprintReferences
54u7FCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1, C2, C5, C6, C7
5SK6812LED_SMD:LED_SK6812_PLCC4_5.0x5.0mm_P3.2mmD1, D2, D3, D4, D5
3Conn_01x05_PinConnector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalJ1, J2, J3
2100nFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC3, C4
210kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1, R2
1100kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR3
1AMS1117-3.3Package_TO_SOT_SMD:SOT-23-5U2
1AO3401APackage_TO_SOT_SMD:SOT-23Q1
1ESP32-C3-WROOM-02RF_Module:ESP32-C3-WROOM-02U1
1ICS-43434Sensor_Audio:InvenSense_ICS-43434-6_3.5x2.65mmMK1
1SW_Push0_NRD_footprints:SW_PUSH-12mm_Wuerth-430456085736SW1
1SW_PushButton_Switch_SMD:SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFSSW2
1USB_C_ReceptaclePCM_PCB_USBC:PCBTypeC_14PJ5

More from feefladder/poly-pcb

12
  • 2 layers929.3 × 404.1 mmP panel, the printed circuit board in 3D

    P panel

    feefladder/poly-pcb

    Polygon pcb designs for polyhedra

    1,440 parts1
  • 2 layers563 × 224.3 mmTr panels, the printed circuit board in 3D

    Tr panels

    feefladder/poly-pcb

    Polygon pcb designs for polyhedra

    1,100 parts1
  • 2 layers309.9 × 257.9 mmSqc--panel, the printed circuit board in 3D

    Sqc--panel

    feefladder/poly-pcb

    Polygon pcb designs for polyhedra

    570 parts1
  • 2 layers285.9 × 373.4 mmP--panel, the printed circuit board in 3D

    P--panel

    feefladder/poly-pcb

    Polygon pcb designs for polyhedra

    432 parts1
  • 2 layers243.7 × 234.8 mmP panels, the printed circuit board in 3D

    P panels

    feefladder/poly-pcb

    Polygon pcb designs for polyhedra

    312 parts1
  • 2 layers161.7 × 153.8 mmDecagon--, the printed circuit board in 3D

    Decagon--

    feefladder/poly-pcb

    Polygon pcb designs for polyhedra

    39 parts1
  • 2 layers100 × 86.6 mmHexagon, the printed circuit board in 3D

    Hexagon

    feefladder/poly-pcb

    Polygon pcb designs for polyhedra

    31 parts1
  • 2 layers97.7 × 86.5 mmHexagon-, the printed circuit board in 3D

    Hexagon-

    feefladder/poly-pcb

    Polygon pcb designs for polyhedra

    27 parts1
  • 2 layers50 × 50 mmBat, the printed circuit board in 3D

    Bat

    feefladder/poly-pcb

    Polygon pcb designs for polyhedra

    26 parts1
  • 2 layers50 × 50 mmSquare, the printed circuit board in 3D

    Square

    feefladder/poly-pcb

    Polygon pcb designs for polyhedra

    25 parts1
  • 2 layers94.9 × 90.9 mmP tabs, the printed circuit board in 3D

    P tabs

    feefladder/poly-pcb

    Polygon pcb designs for polyhedra

    24 parts1
  • 2 layers50 × 43.3 mmAntenna, the printed circuit board in 3D

    Antenna

    feefladder/poly-pcb

    Polygon pcb designs for polyhedra

    21 parts1

Similar boards

  • 4 layers130 × 105 mmHomeDeck, the printed circuit board in 3D

    HomeDeck

    Kilan777/HomeDeck

    Jarvis HomeDeck: a Raspberry Pi CM4 carrier board and voice-assistant software for a 7-inch smart display (KiCad hardware, generated from Python, plus the Python/JS assistant)

    228 parts1
  • 2 layers42 × 116 mmDrink water, the printed circuit board in 3D

    Drink water

    heidtn/drinkmoarwater

    51 partsMIT
  • 4 layers45 × 38 mmMerlynCAM, the printed circuit board in 3D

    MerlynCAM

    YeetTheAnson/MerlynCAM

    An action camera that records at 1080p@90, 1440p@60 and 4k@20 (With I2S microphone and gyro logging @ 150Hz)

    150 parts1
  • 4 layers58 × 35 mmESP HI PLUS, the printed circuit board in 3D

    ESP HI PLUS

    dyu134/ESP-HI-PLUS

    The Robot sub-module is a high-performance actuator and sensing expansion board for the ESP-HI-PLUS, designed to transform the device into a mobile or interactive robotic platform.

    88 parts
  • 4 layers65 × 56 mmSensor HAT, the printed circuit board in 3D

    Sensor HAT

    Eniemooo/Sensor-HAT

    Open-hardware indoor air sensor (CO2, VOC/NOx, T/RH, light, sound): HAT for Raspberry Pi or standalone with Seeed XIAO + ESPHome. KiCad 10.

    112 parts
  • 2 layers40 × 33 mmRecab, the printed circuit board in 3D

    Recab

    hung1508/Recab_mini_HW

    157 parts
  • 4 layers120 × 94 mmAlfred, the printed circuit board in 3D

    Alfred

    mkol-ME/A1-4RD

    Local voice assistant with a character: Whisper and a 26B LLM on a reflashed datacenter GPU, a custom voice, a 3D-printed body and a KiCad PCB

    125 partsMIT
  • 2 layers30 × 60 mmCapture clip, the printed circuit board in 3D

    Capture clip

    vaknin/PCB

    Hardware ideas to fab-ready PCBs as code: Rust pcbgen on KiCad 10, Freerouting, ESP-IDF firmware with QEMU/Wokwi simulation, CadQuery enclosures

    52 parts

Questions

How big is the Antenna mic PCB?

It measures 50 × 43.3 mm and has 2 copper layers, 0.8 mm thick.

What parts does the Antenna mic use?

25 parts, built around the ESP32-C3-WROOM-02-H4, AMS1117-3.3, SK6812 and AO3401A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Antenna mic KiCad files?

From the feefladder/poly-pcb repository on GitHub, at the commit this page was made from: the board is antenna/antenna_mic.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Antenna mic design in my own project?

Its repository states no licence, so its author keeps all rights: ask feefladder before reusing the design.