Skip to the content
2 layers42 × 116 mmDrink water, the printed circuit board in 3D
Size
42 × 116 mm
Copper layers
2
Thickness
1.6 mm
Parts
51
Nets
61
Pads
246
Tracks, vias
393, 61
Pours
2
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
16 May 2025
Updated
18 May 2025

Overview

Drink water is an open-source printed circuit board by heidtn, from the heidtn/drinkmoarwater repository on GitHub, published under the MIT licence. It is a 2-layer board of 42 × 116 mm with 51 parts on 61 nets, routed with 393 tracks and 61 vias.

It is built around the ESP32-C3-WROOM-02-H4, AMS1117-3.3 and DW01A, with the LSM6DSM, TP4056 and USBLC6-2SC6 among its other parts. Its parts include 14 capacitors, 12 resistors, 7 ICs, 4 diodes and 4 connectors. It belongs with the ESP32 and RISC-V boards of this library.

Main components

9

Parts

51
QtyValueFootprintReferences
70.1uCapacitor_SMD:C_0402_1005MetricC2, C4, C5, C6, C11, C12, C13
410kResistor_SMD:R_0402_1005MetricR1, R2, R3, R12
41kResistor_SMD:R_0402_1005MetricR6, R7, R10, R11
4MountingHoleMountingHole:MountingHole_2.7mm_M2.5_Pad_ViaH1, H2, H3, H4
310uCapacitor_SMD:C_0805_2012MetricC1, C7, C9
3LEDLED_SMD:LED_0603_1608MetricD1, D2, D3
21uCapacitor_SMD:C_0402_1005MetricC3, C14
25k1Resistor_SMD:R_0402_1005MetricR4, R5
2TestPointTestPoint:TestPoint_Pad_D1.5mmTP1, TP2
11.2kResistor_SMD:R_0402_1005MetricR8
1100Resistor_SMD:R_0402_1005MetricR9
122uCapacitor_SMD:C_0805_2012MetricC10
1AMS1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U7
1AO3401APackage_TO_SOT_SMD:SOT-23Q2
1Conn_01x02Connector_JST:JST_GH_SM02B-GHS-TB_1x02-1MP_P1.25mm_HorizontalJ3
1Conn_01x02Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ4
1Conn_01x04Connector_JST:JST_GH_BM04B-GHS-TBT_1x04-1MP_P1.25mm_VerticalJ1
1DW01APackage_TO_SOT_SMD:SOT-23-6U4
1ESP32-C3-WROOM-02RF_Module:ESP32-C3-WROOM-02U1
1FDC1004Package_SO:MSOP-10_3x3mm_P0.5mmU6
1FS8205Package_TO_SOT_SMD:SOT-23-6Q1
1LSM6DSMPackage_LGA:LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4yU5
1MBRS130LT3Diode_SMD:D_SMBD4
1SW_SPDTButton_Switch_SMD:SW_SPDT_PCM12SW1
1TP4056JLCPCB:ESOP-8_L4.9-W3.9-P1.27-LS6.0-BL-EPU3
1USBLC6-2SC6Package_TO_SOT_SMD:SOT-23-6U2
1USB_C_Receptacle_USB2.0_16PConnector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12J2
1capacitive level sensorcustom_parts:level_sensor_footprintC8
1https://github.com/heidtn/drinkmoarwatercustom_parts:https___github.com_heidtn_drinkmoarwaterDrink Water V0.1.0

Similar boards

  • 2 layers78 × 92 mmESPCARproject, the printed circuit board in 3D

    ESPCARproject

    Sumya99/RobotCarPCB

    NAND сургалтын төвийн сурагчдад зориулсан робот машины PCB төсөл

    92 parts
  • 2 layers54.9 × 95 mmBoard v5, the printed circuit board in 3D

    Board v5

    brev-dev/another_esp8266_sensor_board

    PCB layout and instructions for a multi-purpose esp8266 sensor device, with optional LORA connectivity.

    86 parts5GPL-3.0
  • 2 layers230 × 85 mmLe chiff ble hotswap, the printed circuit board in 3D

    Le chiff ble hotswap

    MangoIV/le_chiff_ble

    A drop-in replacement-PCB for the beautiful le_chiffre

    117 parts52GPL-3.0
  • 2 layers266.5 × 99 mmKlackerBS, the printed circuit board in 3D

    KlackerBS

    kitspace-test-repos/kicad6-file-collection

    154 partsMIT
  • 2 layers67 × 96 mmTo the moon, the printed circuit board in 3D

    To the moon

    Krakert/To-the-moon

    63 parts
  • 2 layers196.1 × 87.8 mmUnispliff, the printed circuit board in 3D

    Unispliff

    weteor/Unispliff

    34 key col stagger keyboard w/ encoder.

    99 parts3CERN-OHL-P-2.0
  • 4 layers29.9 × 32 mmModels heart rev1.1, the printed circuit board in 3D

    Models heart rev1.1

    KushlaVR/models-heart

    Можливості: Керування через WIFI з телефона або ПК 5 незалежних каналів (світлодіоди/сервомотори) 1 Н-міст для підключення мотора (піковий струм до 3А) Вмонтована BMS 1S та контроллер заряду Li-Ion акумулятора з…

    106 parts7GPL-3.0
  • 4 layers340.8 × 104.6 mmNiphar, the printed circuit board in 3D

    Niphar

    mornepousse/Niphargus

    Niphargus — a slim, indestructible wireless split keyboard. ESP32 + nRF24, wired fallback, and an emergency kit hidden behind the USB port. The successor to the Rouge-Gorge.

    287 parts4MIT

Questions

How big is the Drink water PCB?

It measures 42 × 116 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Drink water use?

51 parts, built around the ESP32-C3-WROOM-02-H4, AMS1117-3.3, DW01A and LSM6DSM. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Drink water KiCad files?

From the heidtn/drinkmoarwater repository on GitHub, at the commit this page was made from: the board is drink_water_pcb/drink_water/drink_water.kicad_pcb and its schematic drink_water_pcb/drink_water/drink_water.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Drink water design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).