Skip to the content
2 layers212.3 × 91.7 mmPcb core, the printed circuit board in 3D

A simple control for a analog model train. Changes are only made on my private Git-Server and are pushed to GitHub. Issues on Github are wellcome.

Size
212.3 × 91.7 mm
Copper layers
2
Thickness
1.6 mm
Parts
115
Nets
114
Pads
521
Tracks, vias
215, 874
Pours
89
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
1 Apr 2024
Updated
8 Feb 2025

Overview

Pcb core is an open-source printed circuit board by fanningert, from the fanningert/kicad_model_train_control repository on GitHub. It is a 2-layer board of 212.3 × 91.7 mm with 115 parts on 114 nets, routed with 215 tracks and 874 vias.

It is built around the PQQ10W-Q24-S3-S and DRV8871DDA. Its parts include 34 capacitors, 23 connectors, 21 ICs, 17 resistors and 3 diodes.

Main components

2

README

README.md

Model Train Control

Control unit for analog model trains, based on ESPHome. A Home Assistant instance is used for visualization and control. This board is stackable up to 64 boards and every board has 16 outputs (3 pin). The Voltage is limited on the outputs per ESPHome template. It comes in three variants, but all variants are the same boards. Only some components are not placed.

  • Primary node with ESP32-S3-Wroom-2
  • Primary node with ESP32-Devkit (can also be used as sub node with 3,3V power supply and protection)
  • Sub node

3D render of PCB PCB Top PCB Bottom

Features

  • 16 h-bridges per board and stackable to 64 boards
  • Reverse Voltage, Over Voltage and Under Voltage protection
  • (optional) ESP32-Devkit
  • (optional) ESP32-S3-Wroom-2

Simple graphic of the board connections

mermaid
flowchart LR
    Z[PowerSupply] ===|24V DC| A
    A[PCB_Core1] ===|24V DC, 3.3V, I2C| B & C & D
    B[PCB_Core2]
    C[PCB_Core...]
    D[PCB_Core64]

Supported szenarios

  • Power line
  • Yield
  • Generic Switch
  • Signal
  • Uncoupler

Parts

115
QtyValueFootprintReferences
1722uFCapacitor_SMD:CP_Elec_6.3x7.7C12, C14, C16, C18, C20, C22, C24, C26, C28, C30, C32, C34, C36, C38, C40, C41 +1
160.1uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC6, C10, C13, C15, C17, C19, C21, C23, C25, C27, C29, C31, C33, C35, C37, C39
161053131103library:105313YY03J3, J4, J5, J6, J7, J8, J9, J10, J11, J12, J13, J14, J15, J16, J17, J18
1630kResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR8, R18, R21, R24, R27, R30, R33, R36, R39, R42, R45, R48, R51, R54, R57, R60
16DRV8871DDAlibrary:SOIC127P600X170-9NIC1, IC3, IC5, IC6, IC7, IC8, IC9, IC10, IC11, IC12, IC13, IC14, IC15, IC16, IC17, IC18
8MountingHoleMountingHole:MountingHole_3.2mm_M3_Pad_ViaH1, H2, H3, H4, H5, H6, H7, H8
8TabPCM_kikit:TabT1, T2, T3, T4, T5, T6, T7, T8
6PCBConnectorTestPoint:TestPoint_THTPad_D3.0mm_Drill1.5mmJ1, J20, J21, J22, J25, J27
2GREEN LEDLED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolderD2, D6
2~cust_pcb:ioexpanderU4, U5
11725656library:1725656J2
147uFCapacitor_SMD:CP_Elec_6.3x7.7C42
156Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR23
1PQQ10W-Q24-S3-Slibrary:PQQ10WQ24S3SPS1
1~cust_pcb:voltage_protectionU2
1~cust_pcb:esp32U1
1~cust_pcb:i2cmultiplexerU6
1~Diode_SMD:D_SOD-123FD5

More from fanningert/kicad_model_train_control

3
  • 2 layers18.3 × 25.9 mmPcb i2cmultiplexer, the printed circuit board in 3D

    Pcb i2cmultiplexer

    fanningert/kicad_model_train_control

    A simple control for a analog model train. Changes are only made on my private Git-Server and are pushed to GitHub. Issues on Github are wellcome.

    39 parts
  • 2 layers31 × 73.7 mmPcb esp32dev, the printed circuit board in 3D

    Pcb esp32dev

    fanningert/kicad_model_train_control

    A simple control for a analog model train. Changes are only made on my private Git-Server and are pushed to GitHub. Issues on Github are wellcome.

    27 parts
  • 2 layers18 × 16 mmPcb vpdummy, the printed circuit board in 3D

    Pcb vpdummy

    fanningert/kicad_model_train_control

    A simple control for a analog model train. Changes are only made on my private Git-Server and are pushed to GitHub. Issues on Github are wellcome.

    16 parts

Similar boards

  • 4 layers122.2 × 115.1 mmScan controller kicad, the printed circuit board in 3D

    Scan controller kicad

    fwachsmuth/Filmkorn-Raw-Scanner

    The Filmkorn Raw Scanner, turning 8mm and 16mm films into lossless 12-bit CinemaDNG

    170 parts13MIT
  • 4 layers81.3 × 52.8 mmGlue Board, the printed circuit board in 3D

    Glue Board

    arkorobotics/robocar-pinky

    DIY Robocar Project - Codename Pinky

    87 parts12
  • 2 layers65.6 × 56 mmWw2020, the printed circuit board in 3D

    Ww2020

    dkjonas/WildWillyHardware

    69 parts11
  • 4 layers50 × 50 mmSimpleboard, the printed circuit board in 3D

    Simpleboard

    AlessioMorale/unav2_hardware

    Initial test hardware for the future uNav board version

    122 parts5MIT
  • 2 layers83.3 × 56.5 mmPhone bell, the printed circuit board in 3D

    Phone bell

    purduehackers/phone-bell

    A Rotary Phone Doorbell

    53 parts4
  • 4 layers123 × 56 mmSkyduino Hardware, the printed circuit board in 3D

    Skyduino Hardware

    Skyduino/Skyduino-Hardware

    Hardware design files for the Skyduino roaster

    80 parts4
  • 4 layers31.3 × 34 mmNOGGIN, the printed circuit board in 3D

    NOGGIN

    berkeleyauv/RoboSub_HW

    PCB designs for Underwater Robotics at Berkeley (UR@B)

    60 parts3GPL-3.0
  • 2 layers93.1 × 158.3 mmMegaMouse, the printed circuit board in 3D

    MegaMouse

    KenwoodFox/MegaMouse

    MegaMouse! An atmega 328p powered micromouse!

    136 parts3MIT

Questions

How big is the Pcb core PCB?

It measures 212.3 × 91.7 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Pcb core use?

115 parts, built around the PQQ10W-Q24-S3-S and DRV8871DDA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Pcb core KiCad files?

From the fanningert/kicad_model_train_control repository on GitHub, at the commit this page was made from: the board is pcb_core/project.kicad_pcb and its schematic pcb_core/ioexpender.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Pcb core design in my own project?

Its repository states no licence, so its author keeps all rights: ask fanningert before reusing the design.