Movement tracker
- Size
- 25.9 × 13.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 54
- Nets
- 57
- Pads
- 235
- Tracks, vias
- 614, 145
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 19 Sep 2023
- Updated
- 30 Mar 2026
Overview
Movement tracker is an open-source printed circuit board by evolutek, from the evolutek/movement-tracker repository on GitHub. It is a 2-layer board of 25.9 × 13.5 mm with 54 parts on 57 nets, routed with 614 tracks and 145 vias.
It is built around the MCP2551-I/SN-HG, BNO085 and 150121YV74000. Its parts include 19 capacitors, 12 resistors, 5 ICs, 5 diodes and 3 connectors. It belongs with the STM32 boards of this library.
Main components
3MCP2551-I/SN-HG
SOP-8SOP-8 CAN Transceivers ROHSHGSEMICAN TransceiversBNO085
LGA-28(3.8x5.2)1.65V~3.6V 12bit、16bit IMU (accelerometer + gyroscope) SPI、I2C、UART X,Y,Z X,Y,Z ±2000dps ±8g LGA-28(3.8x5.2) Accelerometers ROHSCEVAAccelerometers150121YV74000
1210130° 2V 40mcd、120mcd 570nm、590nm 572nm、595nm Water Clear Yellow, Emerald Green 1210 LED Indication - Discrete ROHSWürth ElektronikLED Indication - Discrete
Parts
54| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100nF | Capacitor_SMD:C_0603_1608Metric | C7, C8, C9, C11, C12, C14, C16, C17 |
| 4 | 510 | Resistor_SMD:R_0603_1608Metric | R4, R5, R7, R9 |
| 3 | 10k | Resistor_SMD:R_0603_1608Metric | R3, R11, R12 |
| 3 | 1uF | Capacitor_SMD:C_0603_1608Metric | C1, C3, C15 |
| 3 | M2 | MountingHole:MountingHole_2.2mm_M2_Pad_Via | H1, H2, H3 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric | C4, C19 |
| 2 | 18pF | Capacitor_SMD:C_0603_1608Metric | C5, C6 |
| 2 | 4.7k | Resistor_SMD:R_0603_1608Metric | R8, R10 |
| 2 | D | Diode_SMD:D_SOD-523 | D1, D2 |
| 1 | 0 | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 100uF | Capacitor_SMD:CP_Elec_3x5.4 | C2 |
| 1 | 10nF | Capacitor_SMD:C_0603_1608Metric | C10 |
| 1 | 120 | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 150121YV74000 | ComponentsEvo:WL-SBCW_1210 | D5 |
| 1 | 16 MHz | Crystal:Crystal_SMD_5032-4Pin_5.0x3.2mm | Y1 |
| 1 | 3.3uF | Capacitor_SMD:C_0603_1608Metric | C18 |
| 1 | 435431019840 | ComponentsEvo:435431019840 | SW1 |
| 1 | 470p | Capacitor_SMD:C_0603_1608Metric | C13 |
| 1 | ADNS 9800 | ComponentsEvo:ADNS 9800 | U5 |
| 1 | BNO085 | ComponentsEvo:Adafruit BNO085 | U4 |
| 1 | Bus Actuators | ConnectorsEvo:690367281076 | J2 |
| 1 | GREEN | LED_SMD:LED_0805_2012Metric | D4 |
| 1 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | LOGO | ComponentsEvo:logo-evo-min | G*** |
| 1 | MCP2551-I-SN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | NCP718xSN330 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | Q_NMOS_GSD | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Q_PMOS_GSD | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | RED | LED_SMD:LED_0805_2012Metric | D3 |
| 1 | STLINK | ConnectorsEvo:SAMTEC_FTSH-107-01-L-DV-K | J3 |
| 1 | STM32G491KEUx | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm | U3 |
| 1 | SolderJumper_3_Bridged12 | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_NumberLabels | JP2 |
| 1 | USB_B_Mini | ConnectorsEvo:651005136421 | J1 |
More from evolutek/movement-tracker
4- 2 layers

- 2 layers24.6 × 13.5 mm

- 2 layers24.6 × 13.5 mm

- 2 layers18.6 × 13.5 mm

Similar boards
- 2 layers29.5 × 24.3 mm

- 4 layers46.1 × 45.6 mm

Avionics mainboard
AFS-pt/PROMETHEUS-1
Documentation lives here: https://afs-pt.github.io/PROMETHEUS-1
202 parts15 - 6 layers100 × 62 mm

- 8 layers99.4 × 60 mm

IO SDR 1.1
rishivg/IO-SDR
Open-Source software-defined FPGA radio hardware platform
339 parts10CERN-OHL-S-2.0 - 2 layers188.9 × 115 mm

- 2 layers115.8 × 160.2 mm

- 2 layers25 × 22.6 mm

- 6 layers80 × 80 mm

V2ultimateflightcomp
codinga593/IRIS
A next generation model rocket focused on a precise propulsive landing on a tower.
144 parts3
Questions
How big is the Movement tracker PCB?
It measures 25.9 × 13.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Movement tracker use?
54 parts, built around the MCP2551-I/SN-HG, BNO085 and 150121YV74000. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Movement tracker KiCad files?
From the evolutek/movement-tracker repository on GitHub, at the commit this page was made from: the board is V3/movement-tracker.kicad_pcb and its schematic V1/module-optique-grand/module-optique-grand.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Movement tracker design in my own project?
Its repository states no licence, so its author keeps all rights: ask evolutek before reusing the design.