Skip to the content
4 layers120 × 80 mmBrain, the printed circuit board in 3D

Générée par tools/boardgen (module power). 100 x 60 mm, 2 couches, plan de masse en face arrière. Elle gère trois cellules plates 1S 5 Ah.

Size
120 × 80 mm
Copper layers
4
Thickness
1.6 mm
Parts
113
Nets
92
Pads
517
Tracks, vias
1,528, 476
Pours
1
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
29 Aug 2026
Updated
19 Oct 2026

Overview

Brain is an open-source printed circuit board by etiennechlt, from the etiennechlt/electronic-chess repository on GitHub. It is a 4-layer board of 120 × 80 mm with 113 parts on 92 nets, routed with 1,528 tracks and 476 vias.

It is built around the STM32G474RET6, 74AHCT1G125SE and ESP32-S3-WROOM-1-N8, with the ADUM1201AR, TPS62130RGT and AMS1117-3.3 among its other parts. Its parts include 32 capacitors, 31 resistors, 10 connectors, 9 ICs and 6 diodes. It belongs with the ESP32 and STM32 boards of this library.

Main components

12

README

hardware/power/README.md

Carte puissance : pack 3S, charge, protection, jauge

Carte puissance

Générée par tools/boardgen (module power). 100 x 60 mm, 2 couches, plan de masse en face arrière. Elle gère trois cellules plates 1S 5 Ah.

  • Entrée : 20 V depuis un module déclencheur USB-C PD du commerce (connecteur JST XH 2 broches), TVS SMBJ24A, sens de courant d'entrée 10 mohms, deux P-FET AO3401A dos à dos (drain commun) que la sortie ACDRV, active bas, pilote.
  • Chargeur : BQ24610, buck synchrone à deux AO3400A, self 10 µH, sens de courant 50 mohms (1 A = 50 mV), régulation 12,6 V par diviseur sur VFB, courant de charge 1 A (ISET1 à 0,995 V), précharge et fin de charge 0,2 A (ISET2 à 0,101 V), limite d'entrée 2,5 A (ACSET à 0,499 V), fenêtre de température 0 à 45 °C par le réseau 5,23 k / 30,1 k de la fiche sur une CTN 10 k, sorties STAT et PG tirées au 3,3 V de l'AFE. Pas de chemin d'alimentation : le système tourne sur le pack, BATDRV reste libre.
  • Protection : BQ76920 (AFE 3 à 5S) avec ses filtres 1 k / 100 nF par cellule, deux FET AO3400A en bas côté dans le retour du pack (DSG source côté cellules après la résistance de mesure, CHG source sur PACK-), sens 5 mohms, CTN, I2C vers le cerveau, sortie ALERT.
  • Jauge : INA219 sur un shunt 10 mohms côté haut, même bus I2C.
  • Sorties : fusible 2 A, embase pour un interrupteur, bouton de réveil (PWR_KEY), liaison 2 x 4 vers le cerveau, connecteur cellules JST XH 4 broches (B-, B1, B2, B+).

Les valeurs d'ISET, d'ACSET et du diviseur de tension suivent l'application type du BQ24610, revues dans la note 14 ; les formules (ICHG = V(ISET1) / 20 RSR, IPRE = ITERM = V(ISET2) / 10 RSR) et la plage admise de V(ISET2) restent à confirmer sur la fiche. Points ouverts : la CTN de charge est sur la carte alors que le yaml la veut sur le pack (deux broches de plus au connecteur cellules), et le cerveau ne doit jamais ouvrir DSG par I2C (rien ne le refermerait).

bash
PYTHONPATH=tools .venv/bin/python -m boardgen build power --render docs/images/power.png

Résultat du build

Généré par python -m boardgen build power :

ComposantsSegmentsViasNets fermésNets ouvertsDéfauts d'isolement
8242915842100

Nets à finir dans pcbnew (le routeur les a laissés ouverts) :

  • REGN: 2 pad(s) left open (usable start cells 28, goal cells 72)
  • TS1: 2 pad(s) left open (usable start cells 43, goal cells 63)
  • SCL: 4 pad(s) left open (usable start cells 34, goal cells 314)
  • SDA: 4 pad(s) left open (usable start cells 34, goal cells 318)
  • 3V3_BMS: 1 pad(s) left open (usable start cells 534, goal cells 34)
  • SRN: 1 pad(s) left open (usable start cells 163, goal cells 84)
  • SRP: 1 pad(s) left open (usable start cells 642, goal cells 84)
  • CELL3: 6 pad(s) left open (usable start cells 30, goal cells 483)
  • PACK+: 1 pad(s) left open (usable start cells 313, goal cells 100)
  • BAT-: 16 pad(s) left open (usable start cells 39, goal cells 969)

DRC KiCad 7 (tools/drc.py, zones remplies) : 307 signalements, 69 éléments non connectés (les nets ouverts ci-dessus), erreurs restantes : aucune ; avertissements sans effet sur la fabrication : silk_overlap 121, lib_footprint_issues 82, via_dangling 56, silk_over_copper 36, track_dangling 12. Le contrôle d'isolement exact du générateur ne signale aucun défaut. Les vias d'éventail des boîtiers fins font 0,45 mm (perçage 0,2 mm), dans les capacités standard de JLCPCB, à confirmer sur le devis.

Parts

113
QtyValueFootprintReferences
10100nCapacitor_SMD:C_0603_1608MetricC1, C2, C3, C4, C5, C9, C20, C23, C24, C25
6100kResistor_SMD:R_0603_1608MetricR7, R8, R10, R12, R13, R27
610kResistor_SMD:R_0603_1608MetricR2, R14, R15, R20, R26, R40
41kResistor_SMD:R_0603_1608MetricR32, R33, R34, R35
41nCapacitor_SMD:C_0603_1608MetricC31, C32, C33, C34
41uCapacitor_SMD:C_0603_1608MetricC7, C15, C16, C28
449R9Resistor_SMD:R_0603_1608MetricR21, R22, R23, R24
4LEDLED_SMD:LED_0603_1608MetricD2, D3, D4, D5
4M3MountingHole:MountingHole_3.2mm_M3_PadH1, H2, H3, H4
30RResistor_SMD:R_0603_1608MetricR1, R16, R17
310u/10VCapacitor_SMD:C_1206_3216MetricC19, C26, C27
210nCapacitor_SMD:C_0603_1608MetricC8, C17
210u/25VCapacitor_SMD:C_1206_3216MetricC10, C11
222RResistor_SMD:R_0603_1608MetricR5, R6
222u/10VCapacitor_SMD:C_1206_3216MetricC13, C14
22AFuse:Fuse_1206_3216MetricF1, F2
24k7Resistor_SMD:R_0603_1608MetricR18, R19
25k1Resistor_SMD:R_0603_1608MetricR3, R4
2AO3400APackage_TO_SOT_SMD:SOT-23Q2, Q3
1100u/10VCapacitor_SMD:CP_Elec_6.3x7.7C21
1100u/25VCapacitor_SMD:CP_Elec_6.3x7.7C22
112 mmBuzzer_Beeper:Buzzer_12x9.5RM7.6BZ1
11AFuse:Fuse_1206_3216MetricF3
12u2Inductor_SMD:L_Bourns_SRN6045TAL1
12u2Capacitor_SMD:C_0603_1608MetricC18
13V3TestPoint:TestPoint_Pad_1.5x1.5mmTP4
13n3Capacitor_SMD:C_0603_1608MetricC12
1470RResistor_SMD:R_0603_1608MetricR11
14u7Capacitor_SMD:C_0603_1608MetricC6
1523kResistor_SMD:R_0603_1608MetricR9
15VTestPoint:TestPoint_Pad_1.5x1.5mmTP3
15VATestPoint:TestPoint_Pad_1.5x1.5mmTP2
174AHCT1G125Package_TO_SOT_SMD:SOT-23-5U8
1ADuM1201Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU6
1AMS1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U7
1AO3401APackage_TO_SOT_SMD:SOT-23Q1
1AP2112K-3.3Package_TO_SOT_SMD:SOT-23-5U3
1BAV99Package_TO_SOT_SMD:SOT-23D6
1BLM21PG221Resistor_SMD:R_0805_2012MetricFB1
1BOOTButton_Switch_SMD:SW_SPST_PTS645SW1
1COMM_3V3: 1 ESP / 3 PIConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJP1
1ESP BOOTButton_Switch_SMD:SW_SPST_PTS645SW3
1ESP ENButton_Switch_SMD:SW_SPST_PTS645SW4
1ESP PROGConnector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ7
1ESP32-S3-WROOM-1RF_Module:ESP32-S3-WROOM-1U5
1GNDTestPoint:TestPoint_Pad_1.5x1.5mmTP5
1LED_ENDTestPoint:TestPoint_Pad_1.5x1.5mmTP1
1LP2985-5.0Package_TO_SOT_SMD:SOT-23-5U4
1MOTIONConnector_PinHeader_2.54mm:PinHeader_2x10_P2.54mm_VerticalJ9
1PI ZEROConnector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_VerticalJ8
1POWERConnector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_VerticalJ10
1QUADRANT 1Connector_FFC-FPC:Hirose_FH12-16S-0.5SH_1x16-1MP_P0.50mm_HorizontalJ1
1QUADRANT 2Connector_FFC-FPC:Hirose_FH12-16S-0.5SH_1x16-1MP_P0.50mm_HorizontalJ2
1QUADRANT 3Connector_FFC-FPC:Hirose_FH12-16S-0.5SH_1x16-1MP_P0.50mm_HorizontalJ3
1QUADRANT 4Connector_FFC-FPC:Hirose_FH12-16S-0.5SH_1x16-1MP_P0.50mm_HorizontalJ4
1RESETButton_Switch_SMD:SW_SPST_PTS645SW2
1SS34Diode_SMD:D_SMAD1
1STM32G474REPackage_QFP:LQFP-64_10x10mm_P0.5mmU1
1SWDConnector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_VerticalJ6
1TPS62130Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.75x1.75mmU2
1USB-CConnector_USB:USB_C_Receptacle_GCT_USB4085J5
1USBLC6-2Package_TO_SOT_SMD:SOT-23-6U9
1USERButton_Switch_SMD:SW_SPST_PTS645SW5
1VINTestPoint:TestPoint_Pad_1.5x1.5mmTP6

More from etiennechlt/electronic-chess

8
  • 4 layers220 × 200 mmQuadrant, the printed circuit board in 3D

    Quadrant

    etiennechlt/electronic-chess

    Générée par tools/boardgen (module power). 100 x 60 mm, 2 couches, plan de masse en face arrière. Elle gère trois cellules plates 1S 5 Ah.

    347 parts
  • 2 layers100 × 62 mmAnalog board, the printed circuit board in 3D

    Analog board

    etiennechlt/electronic-chess

    Générée par tools/boardgen (module power). 100 x 60 mm, 2 couches, plan de masse en face arrière. Elle gère trois cellules plates 1S 5 Ah.

    138 parts
  • 4 layers120 × 108 mmQuadrant-2x2, the printed circuit board in 3D

    Quadrant-2x2

    etiennechlt/electronic-chess

    Générée par tools/boardgen (module power). 100 x 60 mm, 2 couches, plan de masse en face arrière. Elle gère trois cellules plates 1S 5 Ah.

    129 parts
  • 2 layers100 × 60 mmPower, the printed circuit board in 3D

    Power

    etiennechlt/electronic-chess

    Générée par tools/boardgen (module power). 100 x 60 mm, 2 couches, plan de masse en face arrière. Elle gère trois cellules plates 1S 5 Ah.

    82 parts
  • 2 layers110 × 60 mmClock, the printed circuit board in 3D

    Clock

    etiennechlt/electronic-chess

    Générée par tools/boardgen (module power). 100 x 60 mm, 2 couches, plan de masse en face arrière. Elle gère trois cellules plates 1S 5 Ah.

    50 parts
  • 2 layers80 × 56 mmBench, the printed circuit board in 3D

    Bench

    etiennechlt/electronic-chess

    Générée par tools/boardgen (module power). 100 x 60 mm, 2 couches, plan de masse en face arrière. Elle gère trois cellules plates 1S 5 Ah.

    43 parts
  • 2 layers90 × 60 mmMotion, the printed circuit board in 3D

    Motion

    etiennechlt/electronic-chess

    Générée par tools/boardgen (module power). 100 x 60 mm, 2 couches, plan de masse en face arrière. Elle gère trois cellules plates 1S 5 Ah.

    31 parts
  • 4 layers100 × 100 mmCoil board, the printed circuit board in 3D

    Coil board

    etiennechlt/electronic-chess

    Générée par tools/boardgen (module power). 100 x 60 mm, 2 couches, plan de masse en face arrière. Elle gère trois cellules plates 1S 5 Ah.

    9 parts

Similar boards

  • 4 layers74.5 × 70.3 mmNest mini v2-drop in pcb, the printed circuit board in 3D

    Nest mini v2-drop in pcb

    marceldale/nest-mini-v2-voice

    Open voice satellite board for the Google Nest Mini (2nd gen): local Home Assistant voice assistant with ESP32-S3 + XMOS XU316, ESPHome, Voice PE compatible. Open hardware, prototype stage.

    249 parts4CERN-OHL-S-2.0
  • 4 layers160 × 100 mmHex Oscilloscope, the printed circuit board in 3D

    Hex Oscilloscope

    HexFud/stm32-fpga-oscilloscope

    A 1-Channel 20MHz 100MS/s Mixed-Signal Digital Storage Oscilloscope on a custom 4-layer PCB. Powered by STM32H7, Lattice iCE40 FPGA, and USB-C

    120 parts1
  • 2 layers48.2 × 33.5 mmQNOB V5, the printed circuit board in 3D

    QNOB V5

    alperbasarn/QNOB

    HID with tactile feedback

    174 parts
  • 6 layers100 × 50 mmArchive, the printed circuit board in 3D

    Archive

    sikaxn/FRC-Custom-CAN-Sensor

    If you are looking for IronMaple ESP32‐FRC‐devkit resources, please switch branch to dev-board.

    92 parts12GPL-3.0
  • 4 layers92 × 88 mmIOT, the printed circuit board in 3D

    IOT

    Habib-creater/ESP32-IoT-Monitoring-Control-Board

    4-layer ESP32-based IoT monitoring and control board with environmental sensing, relay control, USB-C, and Qwiic expansion.

    63 parts1
  • 4 layers100 × 100 mmWroom board, the printed circuit board in 3D

    Wroom board

    SinaKarvandi/PCB-Designs

    Blue Pill PCB

    63 parts1GPL-3.0

Questions

How big is the Brain PCB?

It measures 120 × 80 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Brain use?

113 parts, built around the STM32G474RET6, 74AHCT1G125SE, ESP32-S3-WROOM-1-N8 and ADUM1201AR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Brain KiCad files?

From the etiennechlt/electronic-chess repository on GitHub, at the commit this page was made from: the board is hardware/brain/brain.kicad_pcb and its schematic hardware/bench/bench.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Brain design in my own project?

Its repository states no licence, so its author keeps all rights: ask etiennechlt before reusing the design.