Skip to the content
2 layers90 × 65 mmRight hand, the printed circuit board in 3D

3Dキーボード構造のコンセプトモデル

Size
90 × 65 mm
Copper layers
2
Thickness
1.6 mm
Parts
46
Nets
43
Pads
113
Tracks, vias
181, 15
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
11 Feb 2026
Updated
11 Feb 2026

Overview

Right hand is an open-source printed circuit board by eswai, from the eswai/3d-keyboard-concept repository on GitHub, published under the MIT licence. It is a 2-layer board of 90 × 65 mm with 46 parts on 43 nets, routed with 181 tracks and 15 vias.

It is built around the RP2040-ZERO. Its parts include 20 diodes, 20 switches and 1 connector. It belongs with the RP2040 boards of this library.

Main components

1

README

README.md

3Dキーボードコンセプト

3Dレイアウトのキーボードを設計・制作するのは難しい・・・

PCBとPCB Socketの間に、トンネルを設けたライザー部品を配置し、ト ンネルの中を通る配線で、PCBとSocketをつなぐ構造を採用しました。

  1. PCB Socketが使えます。スイッチ交換が可能。
  2. PCBが平面なので、設計が非常に簡単。
  3. PCBを作り直さなくてもライザー部品でスイッチの位置調整が可能

3D Keyboard Concept

Firmware

Parts

46
QtyValueFootprintReferences
20Dkbd_Parts:Diode_SMDD1, D2, D3, D4, D5, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20 +4
20SW_PushLibrary:SW_HOLESW1, SW2, SW3, SW4, SW5, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20 +4
4MountingHoleMountingHole:MountingHole_2.5mmH1, H2, H3, H4
1RP2040-ZeroRP2040-Zero:RP2040-ZeroRZ1
1TRRS_MJ-4PP-9kbd_Parts:TRRS_MJ-4PP-9J1

Similar boards

  • 2 layers132.3 × 94.9 mmCheapino, the printed circuit board in 3D

    Cheapino

    tompi/cheapino

    An affordable split 36 keys keyboard

    59 parts1.2kCC-BY-4.0
  • 2 layers321 × 92.3 mmMx40, the printed circuit board in 3D

    Mx40

    zzeneg/stront

    Split keyboards with 38 or 40 keys, LCD display and Cirque trackpad

    181 parts353MIT
  • 2 layers255.9 × 99.3 mmZerosprey42, the printed circuit board in 3D

    Zerosprey42

    beekeeb/zerosprey42

    Zerosprey42 Keyboard is a wired, beginner friendly, choc hotswap, MonoBlockSplit (Unibody), column-staggered, DIY mechanical keyboard.

    96 parts140
  • 2 layers146.3 × 69.5 mmStress, the printed circuit board in 3D

    Stress

    GroooveBob/Stress

    Pocket Arcade Fight Pad

    22 parts102MIT
  • 2 layers54 × 64 mmDonConIOmini, the printed circuit board in 3D

    DonConIOmini

    ravinrabbid/DonCon2040

    RP2040 based firmware and hardware for DIY Taiko no Tatsujin Drum Controllers

    96 parts66MIT
  • 2 layers52 × 50 mmRP2040-TestPatternGenerator VGA, the printed circuit board in 3D

    RP2040-TestPatternGenerator VGA

    nmur/RP2040-TestPatternGenerator

    A simple test pattern generator running on the RP2040 microcontroller

    12 parts64GPL-3.0
  • 2 layers120 × 40 mmBuinchiez40, the printed circuit board in 3D

    Buinchiez40

    ChrisChrisLoLo/bunchiez40

    A pocket keyboard that makes use of mouse switches to achieve a miniscule size

    90 parts56GPL-3.0
  • 2 layers305.2 × 76.2 mmSoroka, the printed circuit board in 3D

    Soroka

    kapee1/soroka

    40% DIY-keyboard with base kit support

    126 parts47Unlicense

Questions

How big is the Right hand PCB?

It measures 90 × 65 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Right hand use?

46 parts, built around the RP2040-ZERO. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Right hand KiCad files?

From the eswai/3d-keyboard-concept repository on GitHub, at the commit this page was made from: the board is pcb/right-hand/right-hand.kicad_pcb and its schematic pcb/right-hand/right-hand.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Right hand design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).