
NRF24 jammer
W0rthlessS0ul/nRF24_jammer
The nRF24 jammer is a powerful tool that requires an ESP32 and configurable numbers of NRF24 modules to assemble.

BassKatze is an open-source printed circuit board by empirephoenix, from the empirephoenix/BassKatze repository on GitHub. It is a 2-layer board of 51 × 46 mm with 45 parts on 50 nets, routed with 291 tracks and 27 vias.
It is built around the CAT809STBI-GT3 and ESP32-WROOM-32D. Its parts include 14 resistors, 4 capacitors, 2 ICs and 1 transistor. It belongs with the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | R | Resistor_SMD:R_0603_1608Metric | R1, R2, RB1, RB2, RR1, RR2, RW1, RW2 |
| 5 | 1k | Resistor_SMD:R_0603_1608Metric | R3, R4, R9, R10, R11 |
| 4 | Conn_01x01_Female | Connector_Wire:SolderWirePad_1x01_SMD_5x10mm | BAT-1, BAT-2, Bat+1, Bat+2 |
| 4 | LED_BLUE | LED_SMD:LED_0603_1608Metric | L_B1, L_B2, L_B3, L_B4 |
| 4 | LED_GREEN | LED_SMD:LED_0603_1608Metric | L_G1, L_G2, L_G3, L_G4 |
| 4 | LED_RED | LED_SMD:LED_0603_1608Metric | L_R1, L_R2, L_R3, L_R4 |
| 4 | LED_WHITE | LED_SMD:LED_0603_1608Metric | L_W1, L_W2, L_W3, L_W4 |
| 2 | 100n | Capacitor_SMD:C_0805_2012Metric | C1, C6 |
| 2 | 22uf | Capacitor_SMD:C_0805_2012Metric | C2, C5 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | Boot | Button_Switch_THT:SW_PUSH_6mm_H5mm | Boot1 |
| 1 | CAT809STBI-GT3 | Package_TO_SOT_SMD:SOT-23 | U2 |
| 1 | Conn_01x03_Female | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | GND_TX_RX1 |
| 1 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | MIC1 |
| 1 | ESP32-WROOM-32D | RF_Module:ESP32-WROOM-32 | U1 |
| 1 | N-channel 30V 5A | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_CK_RS282G05A3 | Reset1 |

W0rthlessS0ul/nRF24_jammer
The nRF24 jammer is a powerful tool that requires an ESP32 and configurable numbers of NRF24 modules to assemble.


doudar/SmartSpin2k
Transform your spin bike into a Smart Trainer!


voltlog/Valve-Actuator
If you are looking for sources of previous revisions (revA, revB, revC) checkout the different branches of this repo.

Jutta-Proto/protocol-cpp
C++ JURA protocol implementation for controlling a Jura coffee maker over a serial (UART) connection.


It measures 51 × 46 mm and has 2 copper layers, 1.6 mm thick.
45 parts, built around the CAT809STBI-GT3 and ESP32-WROOM-32D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the empirephoenix/BassKatze repository on GitHub, at the commit this page was made from: the board is BassKatze/BassKatze.kicad_pcb and its schematic BassKatze/BassKatze.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask empirephoenix before reusing the design.