4 layers66 × 42 mm
4 layers
NRF development board HAN V1.0
EmielV2002/nRF_dev_boardA dev board utilizing the nRF53 and nPM1100 chip.
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 105
- Nets
- 169
- Pads
- 464
- Tracks, vias
- 1, 0
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 15 Jan 2024
- Updated
- 15 Aug 2024
Overview
NRF development board HAN V1.0 is an open-source printed circuit board by EmielV2002, from the EmielV2002/nRF_dev_board repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board with 105 parts on 169 nets, routed with 1 track and 0 vias.
It is built around the NRF5340-QKAA-R7, APDS-9960 and BME280, with the TSL25911FN, XC9236F08CER-G and BNO055 among its other parts. Its parts include 52 capacitors, 17 resistors, 8 ICs, 6 diodes and 6 inductors. It belongs with the microcontroller boards boards and the nRF52 and nRF5x boards of this library.
Main components
12
NRF5340-QKAA-R7
AQFN-94(7x7)-104dBm -40℃~+105℃ 1.7V~5.5V 2.4GHz 2.6mA 2Mbps 3.2mA 3dBm Bluetooth、802.15.4 SPI、USB、UART、ADC、I2S、PWM transceiver AQFN-94(7x7) RF Transceiver ICs ROHSNordic SemiconRF Transceiver ICs
APDS-9960
LGA-8LGA-8 Abolished Device ROHSBroadcom LimitedAmbient Light Sensors
BME280
LGA-8(2.5x2.5)-40℃~+85℃ 0%RH~100%RH 1.71V~3.6V 1.8uA 16bit I2C、SPI ±0.5℃ ±3%RH LGA-8(2.5x2.5) Temperature and Humidity Sensor ROHSBoschTemperature And Humidity Sensor
TSL25911FN
DFN-6(2x2.2)-30℃~+70℃ 2.7V~3.6V I2C Light Intensity DFN-6(2x2.2) Ambient Light Sensors ROHSAdvanced Monolithic SystemsAmbient Light SensorsXC9236F08CER-G
USPC-6(1.8x2)-40℃~+85℃@(TA) 1 1.2MHz 1.8V~6V 600mA 900mV~6V Buck Buck Built-in Yes USPC-6(1.8x2) DC-DC Converters ROHSTorex SemiconductorDC-DC Converters
BNO055
LGA-28(3.8x5.2)-40℃~+85℃ 2.4V~3.6V 40uA I2C、UART IMU X,Y,Z X,Y,Z ±16g ±2000dps LGA-28(3.8x5.2) Accelerometers ROHSBosch SensortecAccelerometersNPM1100-QDAA-R
QFN-24(4x4)-40℃~+85℃ 1 4.1V~6.7V Lithium-ion/Polymer QFN-24(4x4) Power Management - Specialized ROHSNordic SemiconBattery Management
CUS520,H3F
SC-76(SOD-323)1A 200mA 280mV@10mA 30V 5uA@30V Standalone SC-76(SOD-323) Schottky Diodes ROHSToshibaSchottky Diodes
DMC2400UV
SOT-563-55℃~+150℃ 1 N-Channel + 1 P-Channel 1W 20V 37.1pF 480mΩ@5V 500pC@4.5V 700mA、1.03A N-Channel + P-Channel SOT-563 MOSFETs ROHSDiodes IncorporatedMOSFETs
FDV303N
SOT-23-3-55℃~+150℃ 1 N-channel 2.3nC@4.5V 25V 350mW 450mΩ@4.5V 50pF 680mA SOT-23 MOSFETs ROHSonsemiMOSFETs
PRTR5V0U2X
SOT-143-55℃~+125℃ 0.3pF、0.8pF 100W 10V、15V 5V 6.5V 6A 80nA ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Three channels Unidirectional SOT-143 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
SPH0645LM4H-B
SMDSMD Sourcing Parts ROHSKnowlesMEMS Microphones
README
README.mdnRF dev board
A development board using the nRF53 and nPM1100 chip.
Parts
105| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C29, C31, C36, C38, C39, C42, C46, C47, C48, C49, C50, C51, C52 |
| 9 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9, C10, C11, C12, C16, C17, C18, C19, C26 |
| 6 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C8, C13, C14, C20, C21, C27 |
| 5 | 1.0uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C28, C30, C37, C43, C45 |
| 4 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3, C6, C7 |
| 4 | 1M | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8, R9, R10, R12 |
| 4 | 4.7uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C23, C24, C25 |
| 4 | SW_Push | Button_Switch_SMD:SW_SPST_PTS810 | SW1, SW3, SW4, SW5 |
| 3 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R5, R15 |
| 3 | 10uH | Inductor_SMD:L_0805_2012Metric_Pad1.05x1.20mm_HandSolder | L3, L4, L5 |
| 3 | 120R 0.55A | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | FB1, FB2, FB3 |
| 2 | 2.2uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C22 |
| 2 | 22pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C40, C41 |
| 2 | 27 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R16, R17 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R13, R14 |
| 2 | RED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2, D4 |
| 1 | 0.7pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C35 |
| 1 | 1.2pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C33 |
| 1 | 100nF 2kV | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C32 |
| 1 | 120k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 150 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7 |
| 1 | 15pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4 |
| 1 | 2.2k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6 |
| 1 | 2.2nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C15 |
| 1 | 2.2nH | Inductor_SMD:L_0805_2012Metric_Pad1.05x1.20mm_HandSolder | L6 |
| 1 | 2.2uH | Inductor_SMD:L_0805_2012Metric_Pad1.05x1.20mm_HandSolder | L2 |
| 1 | 220k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11 |
| 1 | 220pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C44 |
| 1 | 32mHz | Crystal:Crystal_SMD_0603-2Pin_6.0x3.5mm | Y1 |
| 1 | 375k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 4.7uH | Inductor_SMD:L_0805_2012Metric_Pad1.05x1.20mm_HandSolder | L1 |
| 1 | APDS-9960 | Sensor:Avago_APDS-9960 | U8 |
| 1 | Antenna | RF_Antenna:Johanson_2450AT43F0100 | AE1 |
| 1 | BME280 | Package_LGA:Bosch_LGA-8_2.5x2.5mm_P0.65mm_ClockwisePinNumbering | U4 |
| 1 | BNO055 | Package_LGA:LGA-28_5.2x3.8mm_P0.5mm | U5 |
| 1 | CUS520,H3F | SamacSys:SOD2513X115N | D6 |
| 1 | Conn_01x03_Pin | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J1 |
| 1 | Conn_02x05_Top_Bottom | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical | J4 |
| 1 | DMC2400UV | SamacSys:SOTFL50P162X60-6N | Q1 |
| 1 | DNP | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C34 |
| 1 | FDV303N | SamacSys:SOT96P237X111-3N | Q2 |
| 1 | FGPMMOPA6H | SamacSys:FGPMMOPA6H | U7 |
| 1 | GREEN | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D3 |
| 1 | MBRM110ET3G | SamacSys:MBRM110LT1G | D1 |
| 1 | NPM1100-QDAA-R | SamacSys:QFN50P400X400X90-25N-D | U1 |
| 1 | NRF5340-QKAA-R7 | User:XCVR_NRF5340-QKAA-R7 | U3 |
| 1 | PRTR5V0U2X | Package_TO_SOT_SMD:SOT-143 | D5 |
| 1 | SPH0645LM4H | Sensor_Audio:Knowles_SPH0645LM4H-6_3.5x2.65mm | MK1 |
| 1 | TSL25911FN | SamacSys:TSL25911FN | U6 |
| 1 | U.FL-R-SMT-1_10_ | SamacSys_Parts:U.FL-R-SMT-1_10_ | J3 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J2 |
| 1 | XC9236F08CER-G | SamacSys:XC9236F08CERG | U2 |
Questions
What parts does the NRF development board HAN V1.0 use?
105 parts, built around the NRF5340-QKAA-R7, APDS-9960, BME280 and TSL25911FN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the NRF development board HAN V1.0 KiCad files?
From the EmielV2002/nRF_dev_board repository on GitHub, at the commit this page was made from: the board is nRF development board HAN_V1.0/nRF development board HAN_V1.0.kicad_pcb and its schematic nRF development board HAN_V1.0/Actuators.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the NRF development board HAN V1.0 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers93 × 94.8 mm
- 2 layers40.8 × 24.2 mm
- 8 layers37 × 40.5 mm
Watch main
ben5049/Smart-Watch
This project aims to take a cheap, common smart watch and upgrade it by replacing the screen and all internal electronics with custom hardware.
206 partsApache-2.0 - 4 layers32.5 × 41 mm
- 2 layers43 × 43 mm
- 4 layers44.5 × 44.5 mm
Flashlight
engineerbo/flashlight-dev-hw
This repository contains design files for the development board for a flashlight boost driver. The test firmware can be found in the firmware repository.
73 parts15MIT - 2 layers55.6 × 71.2 mm
