

Macropad12
Wireless NRF52 Macropad
- Size
- 93 × 94.8 mm
- Copper layers
- 4
- Thickness
- 1 mm
- Parts
- 153
- Nets
- 181
- Pads
- 677
- Tracks, vias
- 2,393, 334
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 15 Nov 2025
- Updated
- 15 Nov 2025
Overview
Macropad12 is an open-source printed circuit board by rontsang, from the rontsang/macropad repository on GitHub. It is a 4-layer board of 93 × 94.8 mm with 153 parts on 181 nets, routed with 2,393 tracks and 334 vias.
It is built around the MS88SF3-NRF52840, GT-EVA01AA-L1 and HC-FPC-05-10-24RLTAG, with the FDV303N, NPM1100-QDAA-R and TPS61022 among its other parts. Its parts include 39 capacitors, 35 diodes, 21 resistors, 14 ICs and 14 switches. It belongs with the keyboards and input boards and the STM32 and nRF52 and nRF5x boards of this library.
Main components
9MS88SF3-NRF52840
SMD,18.5x12.5mmSMD,18.5x12.5mm Bluetooth Modules ROHSMINEWBluetooth ModulesGT-EVA01AA-L1
SMD,4.8x3.9mm-40℃~+85℃ 12/12 12V 50mA Incremental Support Vertical welding SMD,4.8x3.9mm Rotary Encoders ROHSG-SwitchRotary EncodersHC-FPC-05-10-24RLTAG
SMD,P=0.5mm,卧贴-55℃~+85℃ 0.3mm 0.5mm 1mm 24P 400mA 50V Bottom Contact Copper alloy Flip-Top No polarity Surface Mount, Right Angle Without buckle SMD,P=0.5mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Assemblies ROHSHCTLFFC, FPC (Flat Flexible) Connector AssembliesFDV303N
SOT-23-3-55℃~+150℃ 1 N-channel 2.3nC@4.5V 25V 350mW 450mΩ@4.5V 50pF 680mA SOT-23 MOSFETs ROHSonsemiMOSFETsNPM1100-QDAA-R
QFN-24(4x4)-40℃~+85℃ 1 4.1V~6.7V Lithium-ion/Polymer QFN-24(4x4) Power Management - Specialized ROHSNordic SemiconBattery ManagementTPS61022
UncategorisedTexas InstrumentsWS2812B-2020
SMD,2.2x2mm0.6mA 0.84mm 120us 160mcd 200mcd 2kHz 2mm 2mm 300ns 470.4nm 515.6nm 520mcd 5V 622.5nm 800Kbit/s Built-in power-on reset circuit、Built-in power-on reset circuit、Integrated intelligent reverse connection protection function Top-mount SMD,2.2x2mm RGB LEDs(Built-in IC) ROHSWorldsemiRGB LEDs(Built-In IC)TFM201610ALMA1R0MTAA
08061uH 3.1A 3.3A 50mΩ Thin-Film Inductor ±20% 0806 Inductors (SMD) ROHSTDKInductors (SMD)SKRHABE010
SMD-8P,7.5x7.5mmSMD-8P,7.5x7.5mm Multi-Directional Switches ROHSALPSALPINEMulti-Directional Switches
Parts
153| Qty | Value | Footprint | References |
|---|---|---|---|
| 26 | D_Small | Diode_SMD:D_SOD-323 | D201, D202, D203, D204, D205, D206, D207, D208, D209, D210, D211, D212, D213, D214, D215, D216 +10 |
| 11 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C201, C202, C203, C204, C205, C206, C207, C208, C209, C210, C211 |
| 11 | SW_Push_45deg | macropad12:Hotswap_Choc_V1V2 | S201, S202, S203, S204, S205, S206, S207, S208, S209, S210, S211 |
| 11 | WS2812B-2020 | macropad12:LED-SMD_4P-L2.0-W2.0-TL_WS2812B-2020 | RGB201, RGB202, RGB203, RGB204, RGB205, RGB206, RGB207, RGB208, RGB209, RGB210, RGB211 |
| 8 | 100nF | Capacitor_SMD:C_0402_1005Metric | C103, C104, C105, C305, C306, C313, C314, C403 |
| 7 | 10K | Resistor_SMD:R_0402_1005Metric | R401, R403, R404, R407, R408, R411, R412 |
| 7 | LED_Small | LED_SMD:LED_0201_0603Metric | LED201, LED202, LED203, LED204, LED205, LED206, LED207 |
| 5 | 10uF | Capacitor_SMD:C_0402_1005Metric | C212, C301, C303, C304, C309 |
| 5 | Conn_01x04 | macropad12:FPC-SMD_4P-P0.50_HC-FPC-05-09-4RLTAG | J302, J303, J304, J305, J306 |
| 4 | GT-EVA01AA-L1 | macropad12:RES-ADJ-SMD_GT-EVA01AA-L1 | U305, U307, U308, U309 |
| 4 | TestPoint | TestPoint:TestPoint_Pad_1.0x1.0mm | TP301, TP302, TP303, TP304 |
| 3 | 22uF | Resistor_SMD:R_0805_2012Metric | C310, C311, C312 |
| 3 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C101, C102, C315 |
| 2 | 1.5K | Resistor_SMD:R_0402_1005Metric | R303, R304 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric | C307, C308 |
| 2 | 1uF | Capacitor_SMD:C_0402_1005Metric | C106, C123 |
| 2 | 20pF | Capacitor_SMD:C_0402_1005Metric | C401, C402 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R301, R302 |
| 2 | HC-FPC-05-10-24RLTAG | macropad12:FPC-SMD_24P-P0.50_HCTL_HC-FPC-05-10-24RLTAG | U310, U311 |
| 1 | 1.5M | Resistor_SMD:R_0402_1005Metric | R306 |
| 1 | 100K | Resistor_SMD:R_0603_1608Metric | R309 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C122 |
| 1 | 10uH | Inductor_SMD:L_0603_1608Metric | L304 |
| 1 | 150R | Resistor_SMD:R_0402_1005Metric | R310 |
| 1 | 1K | Resistor_SMD:R_0402_1005Metric | R402 |
| 1 | 1M | Resistor_SMD:R_0402_1005Metric | R311 |
| 1 | 1uH | macropad12:L0806 | L302 |
| 1 | 2.2K | Resistor_SMD:R_0402_1005Metric | R307 |
| 1 | 2.2uF | Capacitor_SMD:C_0402_1005Metric | C302 |
| 1 | 2.2uH | Inductor_SMD:L_0603_1608Metric | L301 |
| 1 | 220k | Resistor_SMD:R_0402_1005Metric | R305 |
| 1 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C121 |
| 1 | 4.7uH | macropad12:L0806 | L303 |
| 1 | 562k | Resistor_SMD:R_0603_1608Metric | R313 |
| 1 | 732k | Resistor_SMD:R_0603_1608Metric | R314 |
| 1 | 8MHz | macropad12:CRYSTAL-SMD_2P-L3.2-W2.5 | Y401 |
| 1 | 976k | Resistor_SMD:R_0603_1608Metric | R312 |
| 1 | BLUE | LED_SMD:LED_0402_1005Metric | D301 |
| 1 | Battery_Cell | macropad12:CONN-SMD_2P-P1.00_SM02B-SRSS-TB-LF-SN | BT301 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal | J307 |
| 1 | ESDR0502NMUTAG | macropad12:UDFN-6_L1.2-W1.0-P0.40-BL | U301 |
| 1 | FDV303N | Package_TO_SOT_SMD:SOT-23 | U303 |
| 1 | FerriteBead | Inductor_SMD:L_0402_1005Metric | FB1 |
| 1 | LED_Small | LED_SMD:LED_0402_1005Metric | D302 |
| 1 | MCP1640BT-I/CHY | Package_TO_SOT_SMD:SOT-23-6 | U306 |
| 1 | MS88SF3-NRF52840 | Library:BULETM-SMD_MS88SF3_V1.0 | U313 |
| 1 | NPM1100-QDAA-R | macropad12:QFN-24_L4.0-W4.0-P0.50-TL-EP2.7 | IC301 |
| 1 | SKRHABE010 | macropad12:SKRHABE010 | S101 |
| 1 | STM32F030K6Tx | Package_QFP:LQFP-32_7x7mm_P0.8mm | U312 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_B3U-1000P | SW402 |
| 1 | SW_SPDT | Button_Switch_SMD:SW_SPDT_PCM12 | SW401 |
| 1 | TLV70018_SOT23-5 | Package_TO_SOT_SMD:SOT-23-5 | U302 |
| 1 | TPS61022 | Package_DFN_QFN:Texas_RWU0007A_VQFN-7_2x2mm_P0.5mm | U304 |
| 1 | Thermistor_NTC | Resistor_SMD:R_0603_1608Metric | TH301 |
| 1 | USB_C_Receptacle_USB2.0 | macropad12:TYPE-C-SMD_GT-USB-7025 | J301 |
Questions
How big is the Macropad12 PCB?
It measures 93 × 94.8 mm and has 4 copper layers, 1 mm thick.
What parts does the Macropad12 use?
153 parts, built around the MS88SF3-NRF52840, GT-EVA01AA-L1, HC-FPC-05-10-24RLTAG and FDV303N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Macropad12 KiCad files?
From the rontsang/macropad repository on GitHub, at the commit this page was made from: the board is macropad12.kicad_pcb and its schematic USB_battery-charger.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Macropad12 design in my own project?
Its repository states no licence, so its author keeps all rights: ask rontsang before reusing the design.
Similar boards
- 4 layers66 × 42 mm

- 4 layers

NRF development board HAN V1.0
EmielV2002/nRF_dev_board
A dev board utilizing the nRF53 and nPM1100 chip.
105 partsGPL-3.0 - 2 layers7.5 × 5.7 mm

BackupProjects mgohren personal 1 20251228
maxgohren/ESPip-Boy
A smart watch based on the ESP32
2 parts2 - 2 layers271.5 × 91.8 mm

- 2 layers112 × 104 mm

- 2 layers69.9 × 17.8 mm

- 4 layers50 × 50 mm

- 6 layers38 × 39 mm
