
DFTBoard
juliancoy/zynqPCB
An 8-layer board in Kicad built upon Xilinx Zynq Chip. Includes sound output, HDMI, DDR3, and Arduino Uno style header for screen connection
Broadcom LimitedExtended
LGA-8 Abolished Device ROHS
The APDS-9960 is an ambient Light Sensor made by Broadcom Limited in a LGA-8 package with 8 pins. LGA-8 Abolished Device ROHS.
PCBKit's library has its KiCad symbol (Sensor:APDS-9960, from KiCad's library) and its footprint (Sensor:Avago_APDS-9960, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C5213766). 55 open-source boards in 31 repositories on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | SDA | Input/output |
| 2 | INT | Open collector |
| 3 | LDR | Passive |
| 4 | LED_K | Passive |
| 5 | LED_A | Passive |
| 6 | GND | Power in |
| 7 | SCL | Input |
| 8 | VDD | Power in |

juliancoy/zynqPCB
An 8-layer board in Kicad built upon Xilinx Zynq Chip. Includes sound output, HDMI, DDR3, and Arduino Uno style header for screen connection


baldengineer/BaldSENSE_Sensor_Feather_Wing
A temperature, humidity, light, and sound sensor wing

bismarx-v1/PRTGN
OwO whats this (This repo contains electronics, mechanical and software data for a protogen visor)

bitbank2/LED_Clock
A low cost PCB project (w/firmware) for a dark-room-friendly digital clock


Twistx77/Firefly
Open WIFI-enabled RGB lamp with temperature, humidity, suspended air particles and eCO2 sensors.

Yes. The symbol is Sensor:APDS-9960 and the footprint Sensor:Avago_APDS-9960, both drawn on this page. PCBKit places them on a board for you when you design with it.
LGA-8, with 8 pins. Its footprint is drawn on this page.
Broadcom Limited publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C5213766, with 0 in stock; the sellers' links on this page open their listings.
55 boards in 31 repositories on GitHub; the most starred are listed on this page, with their KiCad files.