

Led sensor-2
- Size
- 40.6 × 22.9 mm
- Copper layers
- 2
- Thickness
- 1.54 mm
- Parts
- 8
- Nets
- 7
- Pads
- 26
- Tracks, vias
- 59, 0
- Routed
- Yes
- KiCad
- KiCad 5 (file 20190331)
- Created
- 24 Sep 2021
- Updated
- 22 Oct 2021
Overview
Led sensor-2 is an open-source printed circuit board by elamdf, from the elamdf/hope-pcbs repository on GitHub. It is a 2-layer board of 40.6 × 22.9 mm with 8 parts on 7 nets, routed with 59 tracks and 0 vias.
It is built around the LMC6482IN. Its parts include 3 resistors, 1 capacitor, 1 IC, 1 diode and 1 connector. It belongs with the sensors and measurement boards of this library.
Main components
1Parts
8| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 1M | Resistors_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P5.08mm_Vertical | R2 |
| 1 | 1k | Resistors_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P5.08mm_Vertical | R1 |
| 1 | 1u | Capacitors_THT:C_Axial_L3.8mm_D2.6mm_P7.50mm_Horizontal | C1 |
| 1 | 47k | Resistors_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P5.08mm_Vertical | R3 |
| 1 | CONN_01X03 | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J1 |
| 1 | LED | LEDs:LED_D5.0mm | D1 |
| 1 | LMC6482 | Housings_DIP:DIP-8_W7.62mm | U1 |
| 1 | POT | Potentiometers:Potentiometer_Alps_RK09L_Sleve_Single_Horizontal | RV1 |
More from elamdf/hope-pcbs
3- 2 layers69.1 × 48.1 mm

- 2 layers31.7 × 38.1 mm

- 2 layers22.6 × 30.8 mm

Similar boards
- 2 layers101.6 × 53.3 mm

- 4 layers60 × 41 mm

Eog pcb kicad
neurotech-berkeley/eog-eye-tracking
Exploration of EOG (electrooculogram) signals as a potential human computer interface
82 parts7MIT - 2 layers100 × 75 mm

Adjustable Wireless Neuro Stimulator System
ElektroNeo/Adjustable-Wireless-Neuro-Stimulator-System
🧠 0-5.5mA adjustable wireless neurostimulator system made with PIC16F1713 and App Inventor.
33 parts5GPL-3.0 - 2 layers73.7 × 48.3 mm

- 2 layers85 × 70 mm

- 2 layers200 × 100 mm

- 2 layers42 × 20 mm

- 2 layers159 × 100 mm

Questions
How big is the Led sensor-2 PCB?
It measures 40.6 × 22.9 mm and has 2 copper layers, 1.54 mm thick.
What parts does the Led sensor-2 use?
8 parts, built around the LMC6482IN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Led sensor-2 KiCad files?
From the elamdf/hope-pcbs repository on GitHub, at the commit this page was made from: the board is led-light-sensor/led-sensor-2.kicad_pcb and its schematic door_control/door_control.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Led sensor-2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask elamdf before reusing the design.