
Mbus master
roarfred/AmsToMqttBridge
Minimalistic system to read AMS/HAN data from electrical meter

Seu cofre favorito (o que tem os doces)
SweetSafe is an open-source printed circuit board by Eduardo-Barreto, from the Eduardo-Barreto/SweetSafe repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 76.2 × 81.3 mm with 11 parts on 45 nets, routed with 33 tracks and 0 vias.
It is built around the BC337. Its parts include 3 resistors, 1 IC, 1 transistor, 1 connector and 1 switch. It belongs with the RP2040 boards of this library.

Este repositório contém os arquivos do esquemático e da PCB do projeto SweetSafe, um "cofre" de doces com Raspberry Pi Pico. Inclui uma descrição dos componentes utilizados e instruções para montagem.
O funcionamento do SweetSafe é simples: a Raspberry Pi Pico controla um eletroímã que mantém a caixa de doces fechada. Quando um pagamento é realizado com sucesso, a Raspberry Pi Pico desativa o eletroímã, permitindo que a caixa seja aberta. Neste momento, LEDs indicam visualmente que a caixa está destravada, enquanto um buzzer emite um som indicando o sucesso da transação. Caso haja uma tentativa de acesso não autorizada, um sensor de fim de curso detecta a abertura da caixa e aciona um alarme, enquanto a Raspberry Pi Pico envia uma notificação aos servidores. Assim, o SweetSafe não apenas mantém os doces seguros, mas também fornece um sistema de monitoramento eficiente para proteger seu conteúdo.
kicad/: Contém os arquivos de esquemático e PCB do projeto, bem como o principal do KiCad
SweetSafe.kicad_pro: Arquivo do KiCadSweetSafe.kicad_sch: Esquemático do projetoSweetSafe.kicad_pcb: Layout para a PCB do projetoBOM.csv: Lista de materiais do projeto.
images/: Contém as imagens do projeto



3D com RayTracing (porque é maneiro)

| Designator | Footprint | Quantity |
|---|---|---|
| Switch fim de curso | SW_MS0850502F030P1A | 1 |
| Resistor 220 ohms | R_Axial_DIN0414_L11.9mm_D4.5mm_P15.24mm_Horizontal | 2 |
| Resistor 10k ohms | R_Axial_DIN0414_L11.9mm_D4.5mm_P15.24mm_Horizontal | 1 |
| Buzzer | Buzzer_15x7.5RM7.6 | 1 |
| Transistor NPN BC337 | TO-92_Inline_Wide | 1 |
| Raspberry Pi Pico W | RPi_Pico_SMD_TH | 1 |
| Conector Barrel Jack | BarrelJack_Horizontal | 1 |
| Header Fêmea 1x02 | PinSocket_1x02_P2.54mm_Horizontal | 3 |
Os arquivos Gerber estão disponíveis na última release e na pasta /kicad/gerbers
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 220 | Resistor_THT:R_Axial_DIN0414_L11.9mm_D4.5mm_P15.24mm_Horizontal | R1, R2 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0414_L11.9mm_D4.5mm_P15.24mm_Horizontal | R3 |
| 1 | BC337 | Package_TO_SOT_THT:TO-92_Inline_Wide | Q1 |
| 1 | Barrel_Jack | Connector_BarrelJack:BarrelJack_Horizontal | J1 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_15x7.5RM7.6 | BZ1 |
| 1 | Electromagnet- | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Horizontal | Electromagnet+ |
| 1 | GreenLed- | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Horizontal | GreenLed+ |
| 1 | Pico | MCU_RaspberryPi_and_Boards:RPi_Pico_SMD_TH | U1 |
| 1 | RedLed- | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Horizontal | RedLed+ |
| 1 | SW_DPDT_x2 | MS0850502F030P1A:SW_MS0850502F030P1A | SW1 |

roarfred/AmsToMqttBridge
Minimalistic system to read AMS/HAN data from electrical meter



leomil72/LM80C
A Z80-based homebrew computer withTMS9918, AY-3-8910, Z80 CTC, Z80 PIO, and Z80 SIO

pablozg/freeds
Derivador de energía solar excedente creado por Pablo Zerón, Diseño PCB por Amcalo, Tester original por Aeizoon, Wiki por Zoilo Mora

lampmerchant/tashtwenty
An interface for the DCD protocol used by Apple's Hard Disk 20.

CTXz/Video-Glitch-Array
A collection of glitch art circuits dedicated to VGA signal manipulation

It measures 76.2 × 81.3 mm and has 2 copper layers, 1.6 mm thick.
11 parts, built around the BC337. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Eduardo-Barreto/SweetSafe repository on GitHub, at the commit this page was made from: the board is kicad/SweetSafe.kicad_pcb and its schematic kicad/SweetSafe.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).