Skip to the content
2 layers74.9 × 68.6 mmSimple, the printed circuit board in 3D

A small omnidirectional wheeled robot

Size
74.9 × 68.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
21
Nets
35
Pads
105
Tracks, vias
165, 22
Routed
Yes
KiCad
KiCad 4
Created
14 Aug 2017
Updated
19 Sep 2017

Overview

Simple is an open-source printed circuit board by dzufferey, from the dzufferey/mecanum_wheel_robot repository on GitHub. It is a 2-layer board of 74.9 × 68.6 mm with 21 parts on 35 nets, routed with 165 tracks and 22 vias.

It is built around the TSR 1-2450. It belongs with the robots and motor control boards of this library.

Main components

1

README

README.md

Mecanum wheels robot

A small omnidirectional wheeled robot.

The robot is designed as part of a series of tutorials covering: CAD, prototyping, and programming.

The project is split among the following directories:

Not everything is in this repository. You will also need:

The HOWTO.md file describe how to put things together.

Attributions

License

The content of this project itself is licensed under the Creative Commons Attribution 3.0 license, and the source code in the code folder is licensed under the MIT license.

Parts

21
QtyValueFootprintReferences
5CONN_01X04Socket_Strips:Socket_Strip_Straight_1x04CONF1, M1, M2, M3, M4
4CONN_01X02Socket_Strips:Socket_Strip_Straight_1x02CTRL1, CTRL2, CTRL3, CTRL4
4POLOLU_A4988myfootprint:Pololu_a4988DRV1, DRV2, DRV3, DRV4
1> 47 µFCapacitors_ThroughHole:C_Radial_D10_L16_P5C1
1Battery_TerminalTerminal_Blocks:TerminalBlock_Pheonix_MKDS1.5-2polBAT1
1Screw_Terminal_1x02Terminal_Blocks:TerminalBlock_Pheonix_MPT-2.54mm_2polRpi1
1TSR_1-2450TO_SOT_Packages_THT:TO-220_Neutral123_PadsOnlyBCK1

The 17 most common of 21 parts.

Similar boards

  • 4 layers72.4 × 95.3 mmDingoPDM, the printed circuit board in 3D

    DingoPDM

    corygrant/dingoPDM

    Hardware - dingoPDM is an open source, affordable automotive PDM (Power Distribution Module). Pre-assembled and tested units are available or the design can be used to build a DIY version.

    156 parts128MIT
  • 2 layers51.6 × 26.8 mmMHI AC CTRL, the printed circuit board in 3D

    MHI AC CTRL

    hberntsen/mhi-ac-ctrl-esp32

    Control MHI Airconditioning locally using your own ESP32 series chip!

    8 parts74MIT
  • 2 layers65 × 74 mmRP2040 MPG and DRO, the printed circuit board in 3D

    RP2040 MPG and DRO

    terjeio/GRBL_MPG_DRO_BoosterPack

    Tiva C BoosterPack for GRBL MPG/DRO

    54 parts46
  • 2 layers127 × 54.3 mmTerraesp, the printed circuit board in 3D

    Terraesp

    fehlfarbe/terraesp

    ESP32 terrarium controller

    83 parts25MIT
  • 2 layers94.8 × 67.2 mmArgo v9-stable rev4, the printed circuit board in 3D

    Argo v9-stable rev4

    SensorsINI/argo

    Code for Autonomous sail boat

    139 parts16
  • 2 layers110 × 75 mmShark bait remote, the printed circuit board in 3D

    Shark bait remote

    idlehandsdev/shark_bait

    The files and firmware for the Shark Bait wireless pumping system.

    65 parts13
  • 2 layers70 × 40 mmRx V1.2, the printed circuit board in 3D

    Rx V1.2

    TRD-B/EasyRC

    Open source RC platform

    52 parts9MIT

Questions

How big is the Simple PCB?

It measures 74.9 × 68.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Simple use?

21 parts, built around the TSR 1-2450. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Simple KiCad files?

From the dzufferey/mecanum_wheel_robot repository on GitHub, at the commit this page was made from: the board is pcb/4_stepper_drivers/simple.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Simple design in my own project?

Its repository states no licence, so its author keeps all rights: ask dzufferey before reusing the design.