Skip to the content
4 layers54.6 × 68 mmBeagleBurner, the printed circuit board in 3D

KiCad Project for BeagleBurner

Size
54.6 × 68 mm
Copper layers
4
Thickness
1.6 mm
Parts
24
Nets
94
Pads
160
Tracks, vias
101, 20
Pours
39
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
15 Aug 2026
Updated
15 Aug 2026

Overview

BeagleBurner is an open-source printed circuit board by dseight, from the dseight/beagleburner-hw repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 4-layer board of 54.6 × 68 mm with 24 parts on 94 nets, routed with 101 tracks and 20 vias.

It is built around the TS-1187A-B-A-B. Its parts include 10 resistors, 6 diodes, 4 switches and 3 transistors.

Main components

1

README

README.md

BeagleBurner HW

Simple BeagleBone Black cape for BeagleBurner project. Designed in KiCad 10.

PCB

License

Licensed under CERN Open Hardware Licence Version 2 - Permissive.

Parts

24
QtyValueFootprintReferences
6240RResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR5, R6, R7, R8, R9, R10
410KResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1, R2, R3, R4
4LED ORANGELED_THT:LED_D3.0mmD1, D2, D3, D4
4TS-1187A-B-A-BButton_Switch_SMD:SW_Push_1P1T_XKB_TS-1187ASW1, SW2, SW3, SW4
3DDC114EU-7-FPackage_TO_SOT_SMD:SOT-363_SC-70-6Q1, Q2, Q3
1BeagleBone Blackkicad-beagleboard-library:BeagleBoneBlackA1
1LED GREENLED_THT:LED_D3.0mmD6
1LED REDLED_THT:LED_D3.0mmD5

Similar boards

  • 2 layers36.2 × 63.1 mmPicoMemcard pico, the printed circuit board in 3D

    PicoMemcard pico

    dangiu/PicoMemcard

    Emulating PSX Memory Card (or controller) using a Raspberry Pi Pico

    8 parts694GPL-3.0
  • 2 layers10.3 × 23.3 mmMini receiver, the printed circuit board in 3D

    Mini receiver

    loopj/wavephoenix

    Open-source implementation of the Nintendo WaveBird receiver using Silicon Labs Wireless Gecko SoCs

    11 parts430
  • 4 layers86 × 34 mmBsl drv v1, the printed circuit board in 3D

    Bsl drv v1

    jackw01/scanlight

    A better light source for scanning color negative film

    157 parts397CERN-OHL-W-2.0
  • 2 layers26.5 × 34.4 mmPicoLoaderNSB, the printed circuit board in 3D

    PicoLoaderNSB

    makeo/PicoLoader

    A cheap and easy to install modchip for the Nintendo GameCube!

    45 parts320GPL-2.0
  • 2 layers66.8 × 34 mmESP8266, the printed circuit board in 3D

    ESP8266

    MaloufSleep/ME-ESP8266

    Malouf Electronics - ESP8266 Dev Board

    127 parts204MIT
  • 2 layers139 × 59 mmEsp32s2-nixiehost, the printed circuit board in 3D

    Esp32s2-nixiehost

    cnlohr/cnixxi

    My experiment with nixie tubes.

    60 parts151MIT
  • 6 layers84 × 98 mmFujiNet-5200-Rev0, the printed circuit board in 3D

    FujiNet-5200-Rev0

    FujiNetWIFI/fujinet-hardware

    Schematics and design files for FujiNet hardware

    145 parts142
  • 4 layers70 × 70 mmAi camera, the printed circuit board in 3D

    Ai camera

    maxlab-io/tokay-lite-pcb

    Tokay AI Camera - ESP32 camera development board

    161 parts130CERN-OHL-P-2.0

Questions

How big is the BeagleBurner PCB?

It measures 54.6 × 68 mm and has 4 copper layers, 1.6 mm thick.

What parts does the BeagleBurner use?

24 parts, built around the TS-1187A-B-A-B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the BeagleBurner KiCad files?

From the dseight/beagleburner-hw repository on GitHub, at the commit this page was made from: the board is BeagleBurner.kicad_pcb and its schematic BeagleBurner.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the BeagleBurner design in my own project?

Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).