
PicoMemcard pico
dangiu/PicoMemcard
Emulating PSX Memory Card (or controller) using a Raspberry Pi Pico

KiCad Project for BeagleBurner
BeagleBurner is an open-source printed circuit board by dseight, from the dseight/beagleburner-hw repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 4-layer board of 54.6 × 68 mm with 24 parts on 94 nets, routed with 101 tracks and 20 vias.
It is built around the TS-1187A-B-A-B. Its parts include 10 resistors, 6 diodes, 4 switches and 3 transistors.
Simple BeagleBone Black cape for BeagleBurner project. Designed in KiCad 10.

Licensed under CERN Open Hardware Licence Version 2 - Permissive.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 240R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6, R7, R8, R9, R10 |
| 4 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4 |
| 4 | LED ORANGE | LED_THT:LED_D3.0mm | D1, D2, D3, D4 |
| 4 | TS-1187A-B-A-B | Button_Switch_SMD:SW_Push_1P1T_XKB_TS-1187A | SW1, SW2, SW3, SW4 |
| 3 | DDC114EU-7-F | Package_TO_SOT_SMD:SOT-363_SC-70-6 | Q1, Q2, Q3 |
| 1 | BeagleBone Black | kicad-beagleboard-library:BeagleBoneBlack | A1 |
| 1 | LED GREEN | LED_THT:LED_D3.0mm | D6 |
| 1 | LED RED | LED_THT:LED_D3.0mm | D5 |

dangiu/PicoMemcard
Emulating PSX Memory Card (or controller) using a Raspberry Pi Pico

loopj/wavephoenix
Open-source implementation of the Nintendo WaveBird receiver using Silicon Labs Wireless Gecko SoCs

jackw01/scanlight
A better light source for scanning color negative film

makeo/PicoLoader
A cheap and easy to install modchip for the Nintendo GameCube!



FujiNetWIFI/fujinet-hardware
Schematics and design files for FujiNet hardware

maxlab-io/tokay-lite-pcb
Tokay AI Camera - ESP32 camera development board
It measures 54.6 × 68 mm and has 4 copper layers, 1.6 mm thick.
24 parts, built around the TS-1187A-B-A-B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the dseight/beagleburner-hw repository on GitHub, at the commit this page was made from: the board is BeagleBurner.kicad_pcb and its schematic BeagleBurner.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).