6 layers206 × 6 mm
4 layers25 × 41.5 mm
Phyphox m
Dorsel89/phyphox_m_pcb- Size
- 25 × 41.5 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 61
- Nets
- 81
- Pads
- 291
- Tracks, vias
- 965, 155
- Pours
- 27
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 13 Oct 2023
- Updated
- 13 Oct 2023
Overview
Phyphox m is an open-source printed circuit board by Dorsel89, from the Dorsel89/phyphox_m_pcb repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 25 × 41.5 mm with 61 parts on 81 nets, routed with 965 tracks and 155 vias.
It is built around the ANNA-B402-00B, BMP581 and LM358, with the SHTC3, XC9142B33CMR-G and 74LVC1G08Z among its other parts. Its parts include 16 resistors, 14 capacitors, 10 ICs, 3 connectors and 2 switches.
Main components
12
ANNA-B402-00B
SMD-56PMesh networking SMD-56P Bluetooth Modules ROHSu-bloxBluetooth Modules
BMP581
LGA-10(2x2)-40℃~+85℃ 0.5pa/K 1.71V~3.6V 1uA 30Kpa~1.25bar 6pa I2C、SPI、I3C LGA-10(2x2) Pressure Sensors ROHSBosch SensortecPressure Sensors
LM358
SOP-8-18V~18V 0℃~+70℃ 1.2MHz 10nA 2 24mA 3V~36V 500uA 50nA 5mV 80dB Built-in compensation SOP-8 Operational Amplifier ROHSMSKSEMIOperational Amplifier
SHTC3
Digital I²C temperature / humidity sensor. Input voltage: 1.62 - 3.6 V Typical accuracy: ±2 %RH and ±0.2 °C Datasheet: https://www.sensirion.com/shtc3/SensirionUncategorised
XC9142B33CMR-G
SOT-25-5-40℃~+85℃@(TA) 1 1.2MHz 3.3V 650mV~6V Boost Boost Built-in Fixed Yes SOT-25-5 DC-DC Converters ROHSTorex SemiconductorDC-DC Converters
74LVC1G08Z
SOT-553-5-40℃~+125℃ 1 1.65V~5.5V 1.7V、2V 2 2.4V、3.8V 32mA 32mA 4ns@5V,50pF 550mV、800mV 700mV、800mV 74LVC Series AND Gate SOT-553-5 Logic Gates ROHSDiodes IncorporatedLogic Gates
BMI323
LGA-14-40℃~+85℃ IMU (accelerometer + gyroscope) Motion event detection LGA-14 Accelerometers ROHSBosch SensortecAccelerometers
LD39200PUR
DFN-6(3x3)-40℃~+125℃@(Tj) 1 24uVrms 250mV@(2A) 2A 300uA 500mV~5.75V 6V 70dB@(1kHz) Adjustable PG Pin、Over Current Protection、Reverse connection protection、Thermal Shutdown Positive DFN-6(3x3) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSSTMicroelectronicsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
TMUX1511RSVR
UTQFN-16(1.8x2.6)-40℃~+125℃ 1.5V~5.5V 1:1 2pC 2Ω 3.3pF 3GHz 4 4us 60us 67ps Bidirectional analog channel、Power-off isolation、Fail-safe disconnect UTQFN-16(1.8x2.6) Analog Switches, Multiplexers ROHSTexas InstrumentsAnalog Switches, MultiplexersLTRBR37G-4R4S-0125-0
LED-SMD_4PLED-SMD_4P New Arrivals ROHSOSRAM Opto SemiconUncategorised
MDF2016BSS600CTD25
0806-40℃~+125℃ 1 330mΩ 60Ω@2MHz 850mA 0806 Ferrite Beads ROHSTDKFerrite Beads
XC8108AC20ER-G
USPC-6(1.8x2)-40℃~+105℃ 1 2.5V~5.5V 2A 85mΩ Active High High Side Switch Undervoltage Protection(UVP)、Over Temperature Protection USPC-6(1.8x2) Power Distribution Switches ROHSTorex SemiconductorPower Distribution Switches
README
README.mdphyphox_m_pcb
Parts
61| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100nF | Capacitor_SMD:C_0603_1608Metric | C8, C9, C10, C11, C12, C14 |
| 6 | 3k9 | Resistor_SMD:R_0603_1608Metric | R8, R9, R10, R11, R12, R18 |
| 4 | 10uF | Capacitor_SMD:C_0805_2012Metric | C2, C3, C4, C5 |
| 4 | Fiducial | Fiducial:Fiducial_0.5mm_Mask1mm | FID1, FID3, FID4, FID5 |
| 4 | MountingHole | phyphox:Keystone_8734 | H1, H2, H3, H4 |
| 4 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP3, TP4 |
| 3 | 20k4 | Resistor_SMD:R_0603_1608Metric | R2, R3, R4 |
| 2 | 100k | Resistor_SMD:R_0603_1608Metric | R1, R19 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric | C6, C7 |
| 2 | 270 | Resistor_SMD:R_0603_1608Metric | R5, R6 |
| 2 | 5k1 | Resistor_SMD:R_0603_1608Metric | R13, R14 |
| 2 | C_Polarized | phyphox:SuperCap_DSF106Q3R0C | C1, C13 |
| 1 | 4u7 | phyphox:IND_LQH5BPN4R7NT0L | L1 |
| 1 | 74LVC1G08 | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U7 |
| 1 | 750R | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | ANNA-B402-00B | phyphox:ANNA B402 | U1 |
| 1 | BMI323 | phyphox:BMI323 | U2 |
| 1 | BMP581 | phyphox:BMP581 | U3 |
| 1 | Conn_01x08_Pin | Connector_PinSocket_1.00mm:PinSocket_1x08_P1.00mm_Vertical_SMD_Pin1Left | J3 |
| 1 | Conn_ARM_JTAG_SWD_10 | phyphox:Tag-Connect_TC2050-IDC-NL_2x05_P1.27mm_Vertical | J1 |
| 1 | LD39200PUR | phyphox:SON95P300X300X100-7N-D | IC3 |
| 1 | LM358 | Package_TO_SOT_SMD:SOT-23-8 | U5 |
| 1 | LOGO | phyphox:logo_6x6mm | Z1 |
| 1 | LTRBR37G-4R4S-0125-0 | phyphox:LTRBR37G4R4S01250 | LED1 |
| 1 | MDF2016BSS600CTD25 | Inductor_SMD:L_0805_2012Metric | FB1 |
| 1 | MLX90393 | phyphox:MLX90393 | U4 |
| 1 | SHTC3 | phyphox:SHTC3 | IC2 |
| 1 | SW_Push | phyphox:EVQP7J01P | SW1 |
| 1 | TMUX1511RSVR | phyphox:QFN40P180X260X55-16N | IC6 |
| 1 | USB_C_Receptacle | phyphox:USB_C_Receptacle_Molex_105450-0101 | J2 |
| 1 | XC8108AC20ER-G | phyphox:SON50P200X180X60-7N | S1 |
| 1 | XC9142B33CMR-G | phyphox:XC9142B33CMR-G | U6 |
Questions
How big is the Phyphox m PCB?
It measures 25 × 41.5 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Phyphox m use?
61 parts, built around the ANNA-B402-00B, BMP581, LM358 and SHTC3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Phyphox m KiCad files?
From the Dorsel89/phyphox_m_pcb repository on GitHub, at the commit this page was made from: the board is phyphox_m.kicad_pcb and its schematic phyphox_m.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Phyphox m design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 6 layers31.8 × 27 mm
- 4 layers35.5 × 52.5 mm
Ledify
notaroomba/ledify
A super small addressable LED controller with USB-C PD up to 100W, a switchable 5V/12V output and Bluetooth!
80 parts1 - 2 layers50.8 × 101.6 mm
CASE
awetzelkern/CASE
Miminal flight computer designed to be a stepping-stone into creating PCB hardware and software for a fully custom thrust-vectored rocket.
57 parts - 4 layers100 × 35 mm
Navigator
Mig-M27/Avionics-PCBs
Este repositório é usado para gerir as versões dos projetos KiCAD do sistema de Avionics da Porto Space Team. Está dividido em 2 secções: 1.
107 parts - 4 layers69.9 × 44.5 mm
DoughLee2
chl33/Dough133
A temperature-controlled container for proofing and fermenting soughdough
62 parts3MIT - 6 layers55 × 34 mm
Sidewalk Devkit
hlord2000/Sidewalk_Devkit
KiCad hardware design for a compact Nordic Semiconductor devkit built around an nRF54L15 target, nPM1300 power management, and an SX1262 sub-GHz radio front end.
184 parts1CERN-OHL-P-2.0 - 4 layers35 × 35 mm
Canonical
AnasSarkiz/smart-nema14-motor-controller
STEPPERONLINE 14HM11-0404S controller — unrouted work-in-progress prototype; mechanical and electrical qualification pending
213 parts