
Prototype1
domenipavec/usb-vga-computer-control
sudo apt-get install python-opencv v4l-utils python-pip sudo pip install -r python-software/requirements.txt

sudo apt-get install python-opencv v4l-utils python-pip sudo pip install -r python-software/requirements.txt
Prototype1 is an open-source printed circuit board by domenipavec, from the domenipavec/usb-vga-computer-control repository on GitHub. It is a 2-layer board of 64 × 120 mm with 61 parts on 125 nets, routed with 879 tracks and 62 vias.
It is built around the ATTINY841-SSU and TVP7002PZP. Its parts include 35 capacitors, 11 resistors, 7 connectors, 3 ICs and 1 crystal. It belongs with the AVR (ATmega, ATtiny) boards of this library.
sudo apt-get install python-opencv v4l-utils python-pip
sudo pip install -r python-software/requirements.txt
| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | 100nF | Capacitors_SMD:C_0603_HandSoldering | C13, C14, C15, C16, C17, C19, C23, C24, C25, C27, C28, C29, C31, C32, C33, C36 +2 |
| 7 | 10nF | Capacitors_SMD:C_0805_HandSoldering | C4, C5, C6, C7, C9, C10, C12 |
| 4 | 1nF | Capacitors_SMD:C_0805_HandSoldering | C1, C2, C3, C34 |
| 4 | TEST_1P | Measurement_Points:Measurement_Point_Round-SMD-Pad_Small | W1, W2, W3, W4 |
| 3 | 75R | Resistors_SMD:R_0805_HandSoldering | R6, R7, R8 |
| 2 | 10uF | Capacitors_SMD:C_0805_HandSoldering | C21, C30 |
| 2 | 22pF | Capacitors_SMD:C_0805_HandSoldering | C38, C39 |
| 2 | 330R | Resistors_SMD:R_0805_HandSoldering | R5, R11 |
| 2 | 68R | Resistors_SMD:R_0805_HandSoldering | R13, R14 |
| 2 | CONN_01X02 | Pin_Headers:Pin_Header_Straight_1x02 | P3, P4 |
| 2 | CONN_02X20 | Pin_Headers:Pin_Header_Straight_2x20 | P5, P6 |
| 2 | R | Resistors_SMD:R_0805_HandSoldering | R12, R15 |
| 1 | 180R | Resistors_SMD:R_0805_HandSoldering | R4 |
| 1 | 1k5 | Resistors_SMD:R_0805_HandSoldering | R1 |
| 1 | 4.7nF | Capacitors_SMD:C_0805_HandSoldering | C11 |
| 1 | ATTINY841-SSU | SMD_Packages:SOIC-14_N | IC1 |
| 1 | C | Capacitors_SMD:C_0805_HandSoldering | C35 |
| 1 | CONN_01X06 | attiny841-spi:ATTINY841-SPI | P2 |
| 1 | Crystal | Crystals:Crystal_HC49-U_Vertical | Y1 |
| 1 | LD1117S18TR | TO_SOT_Packages_SMD:SOT-223 | U2 |
| 1 | TVP7002 | Housings_QFP:LQFP-100_14x14mm_Pitch0.5mm | U1 |
| 1 | USB_B | Connect:USB_B | P1 |
| 1 | VGA | vga:VGA | J1 |

domenipavec/usb-vga-computer-control
sudo apt-get install python-opencv v4l-utils python-pip sudo pip install -r python-software/requirements.txt


marqs85/de2-vd
Video digitizer add-on module for DE2-115 FPGA development board.

vgacentrifuge/pcb
The repository for designing the PCB for the VGA-mixer in TDT4295


DaveRichmond/PCBs
Just a bunch of PCBs I've designed for various prototyping or experimentation purposes. Mostly breakouts or adapters. CC-BY-3.0-AU



It measures 64 × 120 mm and has 2 copper layers, 1.6 mm thick.
61 parts, built around the ATTINY841-SSU and TVP7002PZP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the domenipavec/usb-vga-computer-control repository on GitHub, at the commit this page was made from: the board is kicad/prototypes/1/prototype1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask domenipavec before reusing the design.