

Amiga scandoubler v030wip
A1200 Line Doubler
- Size
- 95 × 95 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 139
- Nets
- 129
- Pads
- 640
- Tracks, vias
- 1,618, 285
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 27 Sep 2026
- Updated
- 1 Oct 2026
Overview
Amiga scandoubler v030wip is an open-source printed circuit board by 110-kenichi, from the 110-kenichi/A1200LineDoubler repository on GitHub. It is a 4-layer board of 95 × 95 mm with 139 parts on 129 nets, routed with 1,618 tracks and 285 vias.
It is built around the GW1N-LV4QN88C6/I5, SN74LVC2G17DBVR and ADV7125KSTZ140, with the TVP7002PZP, SN74LVC1G17DBVR and HYC06-HDR15B-060 among its other parts. Its parts include 73 capacitors, 44 resistors, 9 ICs, 4 connectors and 3 inductors. It belongs with the retro computing and games boards and the FPGA and CPLD boards of this library.
Main components
7GW1N-LV4QN88C6/I5
QFN-88QFN-88 Programmable Logic Device (CPLDs/FPGAs) ROHSGOWINProgrammable Logic Device (CPLDs/FPGAs)SN74LVC2G17DBVR
SOT-23-6-40℃~+125℃ 1 1.65V~5.5V 10uA 2 2.2ns@3.3V,50pF 24mA 24mA 74LVC Schmitt trigger Unidirectional SOT-23-6 Buffers, Drivers, Receivers, Transceivers ROHSTECH PUBLICBuffers, Drivers, Receivers, TransceiversADV7125KSTZ140
LQFP-48(7x7)-40℃~+85℃ 1LSB 2.1mA 3 3.3V~5V 5.5ns 8 LQFP-48(7x7) Digital to Analog Converters (DAC) ROHSAnalog DevicesDigital To Analog Converters (DACs)TVP7002PZP
HTQFP-100(14x14)0℃~+70℃ 1.65Gbps 1.8V~2V、3V~3.6V Bridge/Converter I2C HTQFP-100(14x14) Video Interface ICs ROHSTexas InstrumentsVideo Interface ICsSN74LVC1G17DBVR
SOT-23-5-40℃~+125℃ 1 1 1.2V、1.9V、2.3V、2.4V 1.65V~5.5V 100mV、300mV、400mV、550mV 10uA 32mA 32mA 74LVC 8.3ns@5V,50pF SOT-23-5 Logic Gates ROHSTECH PUBLICLogic GatesHYC06-HDR15B-060
弯插-25℃~+70℃ 100V 15P 3 3A Blue Female High Density D-Sub Right Angle 弯插 D-Sub / VGA Connectors ROHSHOAUCD-Sub / VGA ConnectorsTYPE-C-31-M-12
SMD-30℃~+80℃ 1 10,000 cycles 16P 20V 5A 7.35mm Female Surface Mount, Right Angle Type-C SMD USB Connectors ROHSHRO ElectronicsUSB Connectors
Parts
139| Qty | Value | Footprint | References |
|---|---|---|---|
| 43 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25, C26, C27 +27 |
| 9 | 4.7k | Resistor_SMD:R_0603_1608Metric | R2, R3, R4, R5, R6, R7, R8, R9, R44 |
| 7 | 10nF | Capacitor_SMD:C_0603_1608Metric | C4, C5, C6, C7, C8, C10, C12 |
| 6 | 10k | Resistor_SMD:R_0603_1608Metric | R14, R33, R34, R41, R42, R43 |
| 6 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C40, C41, C62, C64, C66, C68 |
| 6 | 75R 0.1% | Resistor_SMD:R_0603_1608Metric | R11, R12, R13, R15, R16, R17 |
| 5 | 100nF | C_0402_1005Metric | C42, C70, C71, C72, C73 |
| 5 | 10uF 25V | Capacitor_SMD:C_0805_2012Metric | C47, C54, C55, C57, C59 |
| 4 | 220R@100MHz | Inductor_SMD:L_0603_1608Metric | FB1, FB2, FB3, FB4 |
| 4 | 33R | Resistor_SMD:R_0603_1608Metric | R18, R20, R22, R23 |
| 3 | 100k | Resistor_SMD:R_0603_1608Metric | R19, R21, R35 |
| 3 | 100k 0.1% | Resistor_SMD:R_0603_1608Metric | R28, R30, R32 |
| 3 | 1nF | Capacitor_SMD:C_0603_1608Metric | C3, C9, C11 |
| 3 | 2.2uH | Amiga:L_TDK_VLS4012CX | L1, L2, L3 |
| 3 | 22uF 10V | Capacitor_SMD:C_0805_2012Metric | C56, C58, C60 |
| 3 | TPS62160DSGR | Package_SON:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm | U7, U8, U9 |
| 2 | 10k | R_0402_1005Metric | R39, R40 |
| 2 | 2.2k | R_0402_1005Metric | R37, R38 |
| 2 | 22R | Resistor_SMD:R_0603_1608Metric | R24, R36 |
| 2 | 5.1k 1% | Resistor_SMD:R_0603_1608Metric | R25, R26 |
| 2 | HYC06-HDR15B-060 | Amiga:DE15_HOAUC_HYC06-HDR15B-060 | J1, J2 |
| 2 | SN74LVC2G17DBVR | Package_TO_SOT_SMD:SOT-23-6 | U4, U5 |
| 1 | 1.5k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 137k 0.1% | Resistor_SMD:R_0603_1608Metric | R29 |
| 1 | 1A hold - select | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | 27MHz OT2EL4C4JI-111OLP-27M | Amiga:OSC_ECS-3225MVLC_3.2x2.5 | Y1 |
| 1 | 312k 0.1% | Resistor_SMD:R_0603_1608Metric | R27 |
| 1 | 4.7nF | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 49.9k 0.1% | Resistor_SMD:R_0603_1608Metric | R31 |
| 1 | 536R 0.1% | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | ADV7125KSTZ140 | Package_QFP:LQFP-48_7x7mm_P0.5mm | U3 |
| 1 | GW1N-LV4QN88C6/I5 | Amiga:QFN-88_GW1N4_10x10_P0.4_EP6.8 | U2 |
| 1 | JTAG 2x05 2.54mm | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical_SMD | J4 |
| 1 | SN74LVC1G17DBVR | Package_TO_SOT_SMD:SOT-23-5 | U6 |
| 1 | TVP7002PZP | Amiga:TQFP-100_TVP7002_14x14_P0.5_EP6.2 | U1 |
| 1 | TYPE-C-31-M-12 | Amiga:USB_C_Receptacle_HRO_TYPE-C-31-M-12_Slot0.8 | J3 |
More from 110-kenichi/A1200LineDoubler
1- 4 layers95 × 95 mm

Similar boards
- 2 layers61.6 × 70.3 mm

S3V Zushi kicad pcb
BrainBoardz/BrainBoardz
The Repository for All Things BrainBoardz Related
107 partsGPL-3.0 - 4 layers66 × 119.3 mm

Dev board
irudoy/openmfd
That's the case. STM32 LTDC can't output INTERLACED video signal.
150 partsMIT - 4 layers76.3 × 88.1 mm

- 6 layers220 × 100 mm

Motion card placement
DeadlySIn777/Controller
Unfinished CNC controller motherboard: native KiCad sources, rules, DSN and global routing review
203 parts - 6 layers228.6 × 228.6 mm

- 4 layers124.6 × 68.7 mm

- 2 layers77.5 × 63.2 mm

Tvp board
marqs85/de2-vd
Video digitizer add-on module for DE2-115 FPGA development board.
70 parts14GPL-3.0 - 6 layers177.7 × 96.6 mm

Centrifuge
vgacentrifuge/pcb
The repository for designing the PCB for the VGA-mixer in TDT4295
399 parts1
Questions
How big is the Amiga scandoubler v030wip PCB?
It measures 95 × 95 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Amiga scandoubler v030wip use?
139 parts, built around the GW1N-LV4QN88C6/I5, SN74LVC2G17DBVR, ADV7125KSTZ140 and TVP7002PZP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Amiga scandoubler v030wip KiCad files?
From the 110-kenichi/A1200LineDoubler repository on GitHub, at the commit this page was made from: the board is outputs/amiga_scandoubler/hardware/amiga_scandoubler_v030wip.kicad_pcb and its schematic outputs/amiga_scandoubler/hardware/01_adc.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Amiga scandoubler v030wip design in my own project?
Its repository states no licence, so its author keeps all rights: ask 110-kenichi before reusing the design.