Skip to the content
2 layers90.5 × 55.3 mmESP 32 IEM RIG RX VER 1.0, the printed circuit board in 3D

ESP 32 IEM RIG RX VER 1.0

dlmuschamp/ESP32IEMPack4

A repo to store my code and schematics for a custom wireless IEM pack built using 2 ESP32s and some TFT displays.

Size
90.5 × 55.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
69
Nets
93
Pads
308
Tracks, vias
656, 96
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
30 Jul 2026
Updated
12 Sep 2026

Overview

ESP 32 IEM RIG RX VER 1.0 is an open-source printed circuit board by dlmuschamp, from the dlmuschamp/ESP32IEMPack repository on GitHub. It is a 2-layer board of 90.5 × 55.3 mm with 69 parts on 93 nets, routed with 656 tracks and 96 vias.

It is built around the ESP32-WROOM-32U, PCM5102PW and S8050, with the SP0503BAHTG among its other parts. Its parts include 29 capacitors, 22 resistors, 5 ICs, 3 switches and 2 transistors. It belongs with the ESP32 boards of this library.

Main components

4

Parts

69
QtyValueFootprintReferences
90.1uCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC10, C11, C13, C16, C17, C19, C25, C27, C31
91uCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1, C2, C3, C4, C6, C7, C8, C9, C28
547kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR2, R4, R5, R6, R26
410kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR7, R8, R11, R30
44.7kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1, R3, R9, R10
4MountingHole_2.7mm_M2.5MountingHole:MountingHole_2.7mm_M2.5REF1, REF2, REF3, REF4
3100kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR22, R31, R32
22.2nCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC20, C21
22.2uCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC14, C15
222uCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC5, C30
24.7uCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC24, C26
2470Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR16, R17
25.1kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR23, R24
2S8050Package_TO_SOT_SMD:SOT-23Q1, Q2
10.47uCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC22
110k Dual Gang PotentiometerPTN09S2-H10120K1A:PTN09S2H10120K1AVR1
110uCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC12
11kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR27
122kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR25
133uCapacitor_Tantalum_SMD:CP_EIA-3528-12_Kemet-T_HandSolderC23
1AudioJack3Connector_Audio:Jack_3.5mm_CUI_SJ-3523-SMT_HorizontalJ1
1CP2102C-Axx-xQFN24Package_DFN_QFN:WQFN-24-1EP_4x4mm_P0.5mm_EP2.45x2.45mmU5
1ESP32-WROOM-32URF_Module:ESP32-WROOM-32UU2
1FILTER_MODEButton_Switch_SMD:SW_SPDT_Shouhan_MSK12C02SW2
1LM3940IMPX-3.3_NOPBLM3940IMPX-3.3_NOPB:SOT230P700X180-4NU4
1MAX97220AETE_TMAX97220AETE_T:QFN50P300X300X80-17NU3
1ON/OFFButton_Switch_SMD:SW_SPDT_Shouhan_MSK12C02SW4
1PCM5102Package_SO:TSSOP-20_4.4x6.5mm_P0.65mmU1
1SOFT_MUTEButton_Switch_SMD:SW_SPDT_Shouhan_MSK12C02SW3
1SP0503BAHTPackage_TO_SOT_SMD:SOT-143D1
1USB_C_Receptacle_USB2.0_16PConnector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_HorizontalJ6

More from dlmuschamp/ESP32IEMPack

1
  • 2 layers90.5 × 55.3 mmESP 32 IEM RIG TX VER 1.0, the printed circuit board in 3D

    ESP 32 IEM RIG TX VER 1.0

    dlmuschamp/ESP32IEMPack

    A repo to store my code and schematics for a custom wireless IEM pack built using 2 ESP32s and some TFT displays.

    48 parts4

Similar boards

  • 2 layers190.5 × 121.8 mmGantry PCBv2, the printed circuit board in 3D

    Gantry PCBv2

    4rynv/Eklavya_Gantry

    an attempt to automate screwing out and in of screw holes arranged in a matrix formation

    173 parts12MIT
  • 2 layers134.3 × 111.8 mmSDG11 ESP32, the printed circuit board in 3D

    SDG11 ESP32

    GreenStars91/CatBot-PCB_SD-G11

    ESP32 PCB for Senior Design Group 11 - Spring 2025

    67 parts
  • 2 layers54 × 100.5 mmDesk control, the printed circuit board in 3D

    Desk control

    mubarizahmed/desk_control

    Firmware for an ESP32 based physical productivity widget

    38 parts
  • 2 layersVoc tally light, the printed circuit board in 3D

    Voc tally light

    voc/tallylight-v1

    Tallylight for voctomix with PoE and WiFi

    97 parts1
  • 2 layers38 × 90 mmSIH Smart Irrigation System, the printed circuit board in 3D

    SIH Smart Irrigation System

    Arshsingh1602/Smart-Irrigation-System

    This is our project of SIH 2024 in which we developed a smart irrigation system that can be used to control the under and overuse of water in the feild of farmer.

    30 partsMIT
  • 2 layers45 × 60 mmProjectCursor, the printed circuit board in 3D

    ProjectCursor

    Mini-Touch/cursor-oled

    Cursor Displayer: ESP32 HP20030-D status panel (PCB + Code)

    38 parts

Questions

How big is the ESP 32 IEM RIG RX VER 1.0 PCB?

It measures 90.5 × 55.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the ESP 32 IEM RIG RX VER 1.0 use?

69 parts, built around the ESP32-WROOM-32U, PCM5102PW, S8050 and SP0503BAHTG. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ESP 32 IEM RIG RX VER 1.0 KiCad files?

From the dlmuschamp/ESP32IEMPack repository on GitHub, at the commit this page was made from: the board is KiCad/RX_SKETCHES/ESP_32_IEM_RIG_RX_VER_1.0.kicad_pcb and its schematic KiCad/RX_SKETCHES/ESP_32_IEM_RIG_RX_VER_1.0.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the ESP 32 IEM RIG RX VER 1.0 design in my own project?

Its repository states no licence, so its author keeps all rights: ask dlmuschamp before reusing the design.