
Cap touch starter
cmumford/cap-touch-starter
Simple ESP32 based board design supporting a capacitive touch screen

ESP32 PCB for Senior Design Group 11 - Spring 2025
SDG11 ESP32 is an open-source printed circuit board by GreenStars91, from the GreenStars91/CatBot-PCB_SD-G11 repository on GitHub. It is a 2-layer board of 134.3 × 111.8 mm with 67 parts on 103 nets, routed with 935 tracks and 78 vias.
It is built around the ESP32-WROOM-32U, AMS1117-3.3 and BAT760-7, with the SMBJ5.0A-TR and SP0503BAHTG among its other parts. Its parts include 14 resistors, 12 capacitors, 12 ICs, 8 connectors and 5 diodes. It belongs with the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C1, C3, C7, C9, C10 |
| 5 | TestPoint | TestPoint:TestPoint_Pad_2.0x2.0mm | TP1, TP2, TP3, TP4, TP5 |
| 4 | Pin Header | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J6, J7, J8, J9 |
| 3 | 10k | Resistor_SMD:R_0603_1608Metric | R8, R9, R19 |
| 3 | 1k | Resistor_SMD:R_0603_1608Metric | R10, R13, R14 |
| 2 | 0 | Resistor_SMD:R_0603_1608Metric | R5, R6 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric | C2, C4 |
| 2 | 200 | Resistor_SMD:R_0603_1608Metric | R3, R4 |
| 2 | 22uF | Capacitor_SMD:C_0603_1608Metric | C15, C16 |
| 2 | C | Capacitor_SMD:C_0603_1608Metric | C6, C8 |
| 2 | LED | LED_THT:LED_D3.0mm | D1, D2 |
| 2 | Power Source Switch | Button_Switch_THT:SW_Slide_SPDT_Straight_CK_OS102011MS2Q | SW1, SW2 |
| 2 | Push Button | Button_Switch_THT:SW_PUSH_6mm | S1, S2 |
| 1 | 22.1 k | Resistor_SMD:R_0603_1608Metric | R15 |
| 1 | 2N2219 | Package_TO_SOT_THT:TO-39-3 | Q1 |
| 1 | 3V3 In | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J4 |
| 1 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C5 |
| 1 | 47.5 k | Resistor_SMD:R_0603_1608Metric | R16 |
| 1 | 4k | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | 5 | Resistor_SMD:R_0603_1608Metric | R12 |
| 1 | 5V in | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J3 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U12 |
| 1 | BAT760-7 | Diode_SMD:D_SOD-323F | D5 |
| 1 | CP2102N-Axx-xQFN28 | Package_DFN_QFN:QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm_ThermalVias | U8 |
| 1 | ESP32-WROOM-32U | RF_Module:ESP32-WROOM-32U | U9 |
| 1 | Jumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | JP3 |
| 1 | LED | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | D4 |
| 1 | M1 | Connector_JST:JST_XA_B06B-XASK-1_1x06_P2.50mm_Vertical | U3 |
| 1 | M2 | Connector_JST:JST_XA_B06B-XASK-1_1x06_P2.50mm_Vertical | U4 |
| 1 | M3 | Connector_JST:JST_XA_B06B-XASK-1_1x06_P2.50mm_Vertical | U5 |
| 1 | M4 | Connector_JST:JST_XA_B06B-XASK-1_1x06_P2.50mm_Vertical | U6 |
| 1 | RP_LiDAR | Connector_JST:JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | U1 |
| 1 | Raspberry_Pi_4 | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | J2 |
| 1 | S1 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | U7 |
| 1 | S2 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | U10 |
| 1 | S3 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | U11 |
| 1 | SMBJ5.0A-TR | DownloadedParts:SMB_STM | CR1 |
| 1 | SP0503BAHTG | Package_TO_SOT_SMD:SOT-143 | D3 |
| 1 | TSOP25xx | OptoDevice:Vishay_MOLD-3Pin | U2 |
| 1 | USB_A | Connector_USB:USB_A_Molex_67643_Horizontal | J5 |
The 63 most common of 67 parts.

cmumford/cap-touch-starter
Simple ESP32 based board design supporting a capacitive touch screen



mubarizahmed/desk_control
Firmware for an ESP32 based physical productivity widget

marcutudor79/electronic-module-for-the-dashboard-of-upbdrive-racing-car
My Bachelor's degree that consists of the electronic module for the Formula Student race car and it's testing module


4rynv/Eklavya_Gantry
an attempt to automate screwing out and in of screw holes arranged in a matrix formation

dlmuschamp/ESP32IEMPack
A repo to store my code and schematics for a custom wireless IEM pack built using 2 ESP32s and some TFT displays.
It measures 134.3 × 111.8 mm and has 2 copper layers, 1.6 mm thick.
67 parts, built around the ESP32-WROOM-32U, AMS1117-3.3, BAT760-7 and SMBJ5.0A-TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the GreenStars91/CatBot-PCB_SD-G11 repository on GitHub, at the commit this page was made from: the board is SDG11_ESP32.kicad_pcb and its schematic IRL.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask GreenStars91 before reusing the design.