
Quetzalcoatl
DiegoRosales/PCB_Designs
This repository contains some of the designs I've made. Everything here is Open Source Hardware

This repository contains some of the designs I've made. Everything here is Open Source Hardware
SuperLed Wing is an open-source printed circuit board by DiegoRosales, from the DiegoRosales/PCB_Designs repository on GitHub. It is a 2-layer board of 65.5 × 71.9 mm with 66 parts on 67 nets, routed with 129 tracks and 27 vias.
It is built around the WS2812B.
This is a simple LM317 variable power supply with an extra circuit that creates a split supply to power opamps and stuff. It's theoretically capable of sourcing like 1 amp, but I haven't tested that yet. To generate the split supply I used a voltage divider and an Op Amp from Linear Technologies called LT1206 as a buffer. Here is the link of the article that explains how to generate split supplies with a Virtual Ground. Virtual Ground Circuits


| Qty | Value | Footprint | References |
|---|---|---|---|
| 64 | WS2812B | WS2812B | LED1, LED2, LED10, LED11, LED12, LED13, LED14, LED15, LED16, LED17, LED18, LED19, LED20, LED21, LED22, LED23 +48 |
| 2 | PAPILIO_WING | Papilio_Wing | PAP1, PAP2 |

DiegoRosales/PCB_Designs
This repository contains some of the designs I've made. Everything here is Open Source Hardware

DiegoRosales/PCB_Designs
This repository contains some of the designs I've made. Everything here is Open Source Hardware

DiegoRosales/PCB_Designs
This repository contains some of the designs I've made. Everything here is Open Source Hardware

DiegoRosales/PCB_Designs
This repository contains some of the designs I've made. Everything here is Open Source Hardware

DiegoRosales/PCB_Designs
This repository contains some of the designs I've made. Everything here is Open Source Hardware

DiegoRosales/PCB_Designs
This repository contains some of the designs I've made. Everything here is Open Source Hardware

DiegoRosales/PCB_Designs
This repository contains some of the designs I've made. Everything here is Open Source Hardware

DiegoRosales/PCB_Designs
This repository contains some of the designs I've made. Everything here is Open Source Hardware

DiegoRosales/PCB_Designs
This repository contains some of the designs I've made. Everything here is Open Source Hardware

DiegoRosales/PCB_Designs
This repository contains some of the designs I've made. Everything here is Open Source Hardware

DiegoRosales/PCB_Designs
This repository contains some of the designs I've made. Everything here is Open Source Hardware

DiegoRosales/PCB_Designs
This repository contains some of the designs I've made. Everything here is Open Source Hardware

fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io

FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop



PrintersForAnts/Micron
If you want to purchase full kits there are 3 available (Kits are slowly updating to R1 hardware just make sure to double check the included hardware in your kit and if you have any questions reach out in the discord)



It measures 65.5 × 71.9 mm and has 2 copper layers, 1.6 mm thick.
66 parts, built around the WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the DiegoRosales/PCB_Designs repository on GitHub, at the commit this page was made from: the board is SuperLed Wing/SuperLed Wing.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask DiegoRosales before reusing the design.