Skip to the content
2 layers87 × 64.8 mmArduino Header Wing, the printed circuit board in 3D

Arduino Header Wing

DiegoRosales/PCB_Designs1

This repository contains some of the designs I've made. Everything here is Open Source Hardware

Size
87 × 64.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
24
Nets
49
Pads
215
Tracks, vias
14, 0
Routed
Yes
KiCad
KiCad 3
Created
7 Jul 2014
Updated
23 Feb 2015

Overview

Arduino Header Wing is an open-source printed circuit board by DiegoRosales, from the DiegoRosales/PCB_Designs repository on GitHub. It is a 2-layer board of 87 × 64.8 mm with 24 parts on 49 nets, routed with 14 tracks and 0 vias.

It is built around the TXB0104. Its parts include 14 capacitors and 5 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

1

README

LM317 Power Supply/readme.md

#LM317 Power Supply with split supply Rev 1.3

This is a simple LM317 variable power supply with an extra circuit that creates a split supply to power opamps and stuff. It's theoretically capable of sourcing like 1 amp, but I haven't tested that yet. To generate the split supply I used a voltage divider and an Op Amp from Linear Technologies called LT1206 as a buffer. Here is the link of the article that explains how to generate split supplies with a Virtual Ground. Virtual Ground Circuits

Here are some pics Schematic

PCBs

Parts

24
QtyValueFootprintReferences
120.1uFSM1206C1, C2, C3, C4, C5, C7, C9, C10, C11, C12, C13, C14
5TXB0104SO14EU1, U2, U3, U4, U5
3PAPILIO_WINGSPapilio_WingsPAP1, PAP2, PAP3
21uFSM1206POLC6, C8
1ADC128S102tssop-16ADC1
1ARDUINO_UNOArduino_ShieldARD1

More from DiegoRosales/PCB_Designs

12
  • 2 layers99 × 99 mmQuetzalcoatl, the printed circuit board in 3D

    Quetzalcoatl

    DiegoRosales/PCB_Designs

    This repository contains some of the designs I've made. Everything here is Open Source Hardware

    70 parts1
  • 2 layers65.5 × 71.9 mmSuperLed Wing, the printed circuit board in 3D

    SuperLed Wing

    DiegoRosales/PCB_Designs

    This repository contains some of the designs I've made. Everything here is Open Source Hardware

    66 parts1
  • 2 layers90.2 × 97.3 mmQuetzalcoatl, the printed circuit board in 3D

    Quetzalcoatl

    DiegoRosales/PCB_Designs

    This repository contains some of the designs I've made. Everything here is Open Source Hardware

    59 parts1
  • 2 layers82 × 95 mmEl MIDI, the printed circuit board in 3D

    El MIDI

    DiegoRosales/PCB_Designs

    This repository contains some of the designs I've made. Everything here is Open Source Hardware

    44 parts1
  • 2 layers81.7 × 22.1 mmCODEC Wing, the printed circuit board in 3D

    CODEC Wing

    DiegoRosales/PCB_Designs

    This repository contains some of the designs I've made. Everything here is Open Source Hardware

    36 parts1
  • 2 layers50 × 50 mmDAC Wing V2, the printed circuit board in 3D

    DAC Wing V2

    DiegoRosales/PCB_Designs

    This repository contains some of the designs I've made. Everything here is Open Source Hardware

    35 parts1
  • 2 layersAccutronics Reverb, the printed circuit board in 3D

    Accutronics Reverb

    DiegoRosales/PCB_Designs

    This repository contains some of the designs I've made. Everything here is Open Source Hardware

    25 parts1
  • 2 layers41.9 × 40.6 mmLM317 Power Supply, the printed circuit board in 3D

    LM317 Power Supply

    DiegoRosales/PCB_Designs

    This repository contains some of the designs I've made. Everything here is Open Source Hardware

    21 parts1
  • 2 layers50 × 29.1 mmEl MIDI Chico, the printed circuit board in 3D

    El MIDI Chico

    DiegoRosales/PCB_Designs

    This repository contains some of the designs I've made. Everything here is Open Source Hardware

    15 parts1
  • 2 layers20.8 × 27.7 mmDAC Wing, the printed circuit board in 3D

    DAC Wing

    DiegoRosales/PCB_Designs

    This repository contains some of the designs I've made. Everything here is Open Source Hardware

    12 parts1
  • 2 layers20.5 × 21.5 mmPLL Wing, the printed circuit board in 3D

    PLL Wing

    DiegoRosales/PCB_Designs

    This repository contains some of the designs I've made. Everything here is Open Source Hardware

    10 parts1
  • 2 layers20.8 × 18.3 mmSRAM Wing 256kbit, the printed circuit board in 3D

    SRAM Wing 256kbit

    DiegoRosales/PCB_Designs

    This repository contains some of the designs I've made. Everything here is Open Source Hardware

    6 parts1

Similar boards

  • 2 layers81 × 58.4 mmCAN Logger, the printed circuit board in 3D

    CAN Logger

    olin-electric-motorsports/AdvancedResearch

    2020 Advanced Research

    61 parts5GPL-3.0
  • 2 layers31 × 26.4 mmReflowOvenControl v0, the printed circuit board in 3D

    ReflowOvenControl v0

    Roger-random/tux_lab_thermoformer

    Tux-Lab Thermoforming Machine project

    30 parts3
  • 2 layers45 × 45 mmNLog 9DoF, the printed circuit board in 3D

    NLog 9DoF

    kentN/nLog_9DoF

    arduino compatible embedded microSD data logger

    55 parts1MIT
  • 2 layers84.2 × 86.4 mmThesis custom arduino board, the printed circuit board in 3D

    Thesis custom arduino board

    lonapse456-glitch/ulang_sys_res

    System files of Automated Deep Learning-based Counting System for Giant Freshwater Prawn

    41 parts1
  • 2 layers91.4 × 33 mmPcb lab-1, the printed circuit board in 3D

    Pcb lab-1

    vladbelous/pcb-lab-1

    PCB Lab #1 - Level Shifting

    66 parts
  • 2 layers44.5 × 29.2 mmSd full-2041021-4-breakout, the printed circuit board in 3D

    Sd full-2041021-4-breakout

    wickerbox/Basic-Breakout-Boards

    Proving out wickerlib templates and reference circuits.

    8 parts10
  • 2 layers37.1 × 23 mmArduboy flashcart, the printed circuit board in 3D

    Arduboy flashcart

    facelesstech/arduboy

    arduboy with flashcart

    3 parts4

Questions

How big is the Arduino Header Wing PCB?

It measures 87 × 64.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Arduino Header Wing use?

24 parts, built around the TXB0104. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Arduino Header Wing KiCad files?

From the DiegoRosales/PCB_Designs repository on GitHub, at the commit this page was made from: the board is Arduino Header Wing/Arduino Header Wing.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Arduino Header Wing design in my own project?

Its repository states no licence, so its author keeps all rights: ask DiegoRosales before reusing the design.