

Thesis custom arduino board
System files of Automated Deep Learning-based Counting System for Giant Freshwater Prawn
- Size
- 84.2 × 86.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 41
- Nets
- 77
- Pads
- 197
- Tracks, vias
- 340, 18
- Pours
- 71
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 14 Jul 2026
- Updated
- 6 Nov 2026
Overview
Thesis custom arduino board is an open-source printed circuit board by lonapse456-glitch, from the lonapse456-glitch/ulang_sys_res repository on GitHub. It is a 2-layer board of 84.2 × 86.4 mm with 41 parts on 77 nets, routed with 340 tracks and 18 vias.
It is built around the ATMEGA328P-PU, LM317 and LM7805, with the TXB0104 among its other parts. Its parts include 14 connectors, 9 capacitors, 5 resistors, 3 ICs and 3 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
4ATMEGA328P-PU
DIP-28-300mil-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH DIP-28-300mil Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)LM317
SOT-223-40℃~+85℃@(Ta) 0.003%Vout 1 1.3V~37V 1A 40V 80dB@(120Hz) Adjustable Positive Short Circuit Protection、Thermal shutdown SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSJSMSEMIVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsLM7805
TO-2630℃~+125℃ 1 1A 20V 2V 42uV 5V 62dB@(120Hz) 8mA Fixed Over Temperature Protection、Short Circuit Protection Positive TO-263 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSYONGYUTAIVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsTXB0104
UncategorisedTexas Instruments
Parts
41| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100nF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C3, C4, C5, C6 |
| 3 | 100uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C7, C8, C9 |
| 2 | 22pF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C1, C2 |
| 2 | 330E | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5 |
| 1 | 16MHz | Crystal:Crystal_HC49-4H_Vertical | Y1 |
| 1 | 1N4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | 240E | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
| 1 | 390E | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4 |
| 1 | 6-CHANNEL RELAY | Connector_JST:JST_XH_B6B-XH-A_1x06_P2.50mm_Vertical | J13 |
| 1 | ATmega328P-P | Package_DIP:DIP-28_W7.62mm_Socket | U1 |
| 1 | DSI VIN | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J14 |
| 1 | GY-906-BCC | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | M3 |
| 1 | Gear Motor | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | MTR1 |
| 1 | I2C Device | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J8 |
| 1 | ICSP | Connector_JST:JST_XH_B6B-XH-A_1x06_P2.50mm_Vertical | J3 |
| 1 | JSN-SR04T | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | M4 |
| 1 | LED | LED_THT:LED_D5.0mm | D3 |
| 1 | LM317 | Package_TO_SOT_THT:TO-220-3_Vertical | U3 |
| 1 | LM7805 | Package_TO_SOT_THT:TO-220-3_Vertical | U2 |
| 1 | LN DETECT | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J11 |
| 1 | Light Sensor | Connector_JST:JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J7 |
| 1 | POWER | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | POWER | LED_THT:LED_D5.0mm | D2 |
| 1 | Physical Buttons | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J5 |
| 1 | RELAY VIN | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J12 |
| 1 | RPI VIN | Connector_JST:JST_VH_B2P-VH-B_1x02_P3.96mm_Vertical | J10 |
| 1 | RPi Connector | PCM_SparkFun-Connector:2x20_Shrouded | J9 |
| 1 | Reset SW | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW1 |
| 1 | TB6612FNG | thesis_cab_footprints:TB6612FNG Module | M2 |
| 1 | TXB0104 | thesis_cab_footprints:TXB0104 Module | M1 |
| 1 | USB to TTL | Connector_JST:JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J2 |
| 1 | VSupply | Connector_JST:JST_VH_B2P-VH-B_1x02_P3.96mm_Vertical | J4 |
| 1 | VSupply | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J6 |
Similar boards
- 2 layers70 × 79 mm

- 2 layers110 × 92.7 mm

Yaacwk
federicobriata/iz1glg_yaacw_keyer
YAACWK, Yet Another Arduino CW Keyer, the cheapest HW stuff compatible with K3ng keyer software ( https://github.com/k3ng/k3ng_cw_keyer ). This project contain Eagle project and library of YAACWK.
87 parts7CC-BY-SA-4.0 - 2 layers142.8 × 103.3 mm

STM32 Sensor Expansion Board
7903555032/KiCad_Projects
This repo have my some kicad project files
32 parts - 2 layers30.4 × 52.6 mm

Breadboard Power Supply
Thaurens/myHardware_Designs
A collection of my open-source hardware designs, including schematics, PCB layouts, and documentation.
18 parts - 2 layers28.5 × 54.5 mm

Breadboard power supply
Tirthkush/Breadboard-Power-Supply-PCB
This folder contains the KiCad PCB layout for the Breadboard Power Supply PCB.
18 parts - 2 layers87.9 × 95 mm

Power supply 17VDC low noise
AndmDam/kiCad_repo
Repositorio de mis archivos de mis proyectos de kicad.
37 parts - 4 layers104.3 × 120.8 mm

Testingg
AndrewCieslak/PersonalPowerSupply
My personal 20V in, 15-1.5 V out buck converter power supply code and schematics. Fully discrete, with almost no integrated components for the feedback loop.
115 partsMIT - 2 layers51.7 × 79.4 mm

Control motor dc
kr4fty/DCMotorController
Closed Loop Position Control for DC Servo Motors. STEP / DIR compatible Driver
26 parts5GPL-2.0
Questions
How big is the Thesis custom arduino board PCB?
It measures 84.2 × 86.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Thesis custom arduino board use?
41 parts, built around the ATMEGA328P-PU, LM317, LM7805 and TXB0104. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Thesis custom arduino board KiCad files?
From the lonapse456-glitch/ulang_sys_res repository on GitHub, at the commit this page was made from: the board is pcb_layout/thesis_custom_arduino_board.kicad_pcb and its schematic pcb_layout/thesis_custom_arduino_board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Thesis custom arduino board design in my own project?
Its repository states no licence, so its author keeps all rights: ask lonapse456-glitch before reusing the design.