Skip to the content
2 layers30.4 × 52.6 mmBreadboard Power Supply, the printed circuit board in 3D

Breadboard Power Supply

Thaurens/myHardware_Designs

A collection of my open-source hardware designs, including schematics, PCB layouts, and documentation.

Size
30.4 × 52.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
18
Nets
10
Pads
40
Tracks, vias
64, 1
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
22 May 2026
Updated
26 May 2026

Overview

Breadboard Power Supply is an open-source printed circuit board by Thaurens, from the Thaurens/myHardware_Designs repository on GitHub. It is a 2-layer board of 30.4 × 52.6 mm with 18 parts on 10 nets, routed with 64 tracks and 1 via.

It is built around the LM317, LM7805 and EG1218. Its parts include 7 connectors, 3 capacitors, 3 resistors, 2 ICs and 1 diode. It belongs with the power boards of this library.

Main components

3

README

Tiny-Solar-Power-Supply/README.md

Tiny_Solar_Power_Supply

☀️ Tiny Solar Power Supply (1.2V to 3.3V Auto-Switching)

This repository contains the hardware design files for a Tiny Solar Power Supply. I have completed the design of this module, developed as part of Peter Dalmaris' hardware design course on Udemy. The goal of this project is to repurpose standard solar garden light components (a mini solar panel and a 1.2V Ni-MH rechargeable battery) into a reliable power source for small electronics. Unlike standard garden lights that provide an unregulated voltage, this module outputs a clean, regulated 3.3V, making it ideal for powering low-power microcontrollers and IoT sensors.

📌 Project Overview

The core of the design is the AP3015 DC-DC Boost Converter, which efficiently steps up the 1.2V battery voltage to 3.3V. To conserve energy, the circuit features an autonomous switching mechanism that detects ambient light conditions entirely through hardware.

✨ Key Features

  • Input: 1.2V Ni-MH Rechargeable Battery (AA/AAA) & Mini Solar Panel.
  • Output: Regulated 3.3V DC.
  • Hardware Auto-Sleep/Wake:
    • ☀️ Day Mode (Charging): The solar panel charges the battery. The panel voltage drives the gate of a 2N7002 MOSFET, pulling the SHDN (Shutdown) pin of the AP3015 to ground. The regulator sleeps, and the 3.3V output is disabled.
    • 🌙 Night Mode (Discharging): When the panel voltage drops in the dark, the MOSFET turns off. The AP3015 wakes up and begins boosting the battery voltage to 3.3V.

🛠️ Working Principle & Topology

The circuit can be divided into three main stages:

  1. Charging Stage: Energy from the solar panel flows through a Schottky diode (SS14) into the battery, preventing reverse leakage at night.
  2. Switching Stage: The Q1 MOSFET acts as a light-dependent switch. It toggles the regulator's shutdown pin based on the presence of solar voltage.
  3. Boost Stage: The U1 IC (AP3015) drives an inductor (L1, 10uH). The resulting flyback voltage is rectified by D1 and smoothed by C2. The feedback voltage divider (R1 and R2) strictly maintains the output at 3.3V.

Parts

18
QtyValueFootprintReferences
2330Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR1, R2
2Conn_01x02_PinConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ1, J2
2Conn_01x03_PinConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ3, J4
2Screw_Terminal_01x02TerminalBlock:TerminalBlock_bornier-2_P5.08mmJ5, J7
10.1uCapacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mmC2
110uCapacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mmC1
11uCapacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mmC3
1560Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR3
1Barrel Jack SwitchConnector_BarrelJack:BarrelJack_HorizontalJ6
1EG1218digikey-footprints:Switch_Slide_11.6x4mm_EG1218S1
1LEDLED_THT:LED_D5.0mmD1
1LM317Package_TO_SOT_THT:TO-220-3_VerticalU2
1LM7805Package_TO_SOT_THT:TO-220-3_VerticalU1
1LOGOLOGOG***

More from Thaurens/myHardware_Designs

2
  • 2 layers33.9 × 16.9 mmTiny Solar Power Supply, the printed circuit board in 3D

    Tiny Solar Power Supply

    Thaurens/myHardware_Designs

    A collection of my open-source hardware designs, including schematics, PCB layouts, and documentation.

    18 parts
  • 2 layers58.5 × 24.9 mmLED Torch, the printed circuit board in 3D

    LED Torch

    Thaurens/myHardware_Designs

    A collection of my open-source hardware designs, including schematics, PCB layouts, and documentation.

    5 parts

Similar boards

  • 2 layers28.5 × 54.5 mmBreadboard power supply, the printed circuit board in 3D

    Breadboard power supply

    Tirthkush/Breadboard-Power-Supply-PCB

    This folder contains the KiCad PCB layout for the Breadboard Power Supply PCB.

    18 parts
  • 2 layers33.8 × 49.8 mmBreadboard Power Supply-, the printed circuit board in 3D

    Breadboard Power Supply-

    grkmtrk/Breadboard-Power-Supply-

    A custom-designed, dual-output power supply module built specifically to fit standard MB-102 breadboards. It provides stable 5V and 3.3V power rails, making it an essential tool for prototyping embedded systems and…

    17 parts
  • 2 layers110 × 92.7 mmYaacwk, the printed circuit board in 3D

    Yaacwk

    federicobriata/iz1glg_yaacw_keyer

    YAACWK, Yet Another Arduino CW Keyer, the cheapest HW stuff compatible with K3ng keyer software ( https://github.com/k3ng/k3ng_cw_keyer ). This project contain Eagle project and library of YAACWK.

    87 parts7CC-BY-SA-4.0
  • 2 layers84.2 × 86.4 mmThesis custom arduino board, the printed circuit board in 3D

    Thesis custom arduino board

    lonapse456-glitch/ulang_sys_res

    System files of Automated Deep Learning-based Counting System for Giant Freshwater Prawn

    41 parts1
  • 2 layers70 × 50 mmS88iso, the printed circuit board in 3D

    S88iso

    GBert/railroad

    git clone https://github.com/arendst/Tasmota.git cd Tasmota git tag pio run

    33 parts36
  • 2 layers100 × 35 mmTwo comparator effect, the printed circuit board in 3D

    Two comparator effect

    cyberboy666/two_comparator_effect

    analog video posterisation effect - adapted from a rob schafer design

    34 parts15GPL-3.0

Questions

How big is the Breadboard Power Supply PCB?

It measures 30.4 × 52.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Breadboard Power Supply use?

18 parts, built around the LM317, LM7805 and EG1218. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Breadboard Power Supply KiCad files?

From the Thaurens/myHardware_Designs repository on GitHub, at the commit this page was made from: the board is Breadboard-Power-Supply/Breadboard Power Supply.kicad_pcb and its schematic Breadboard-Power-Supply/Breadboard Power Supply.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Breadboard Power Supply design in my own project?

Its repository states no licence, so its author keeps all rights: ask Thaurens before reusing the design.