Skip to the content
2 layers58.5 × 24.9 mmLED Torch, the printed circuit board in 3D

A collection of my open-source hardware designs, including schematics, PCB layouts, and documentation.

Size
58.5 × 24.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
5
Nets
4
Pads
10
Tracks, vias
15, 0
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
22 May 2026
Updated
26 May 2026

Overview

LED Torch is an open-source printed circuit board by Thaurens, from the Thaurens/myHardware_Designs repository on GitHub. It is a 2-layer board of 58.5 × 24.9 mm with 5 parts on 4 nets, routed with 15 tracks and 0 vias.

Its parts include 1 resistor, 1 diode and 1 switch. It belongs with the power boards of this library.

README

Tiny-Solar-Power-Supply/README.md

Tiny_Solar_Power_Supply

☀️ Tiny Solar Power Supply (1.2V to 3.3V Auto-Switching)

This repository contains the hardware design files for a Tiny Solar Power Supply. I have completed the design of this module, developed as part of Peter Dalmaris' hardware design course on Udemy. The goal of this project is to repurpose standard solar garden light components (a mini solar panel and a 1.2V Ni-MH rechargeable battery) into a reliable power source for small electronics. Unlike standard garden lights that provide an unregulated voltage, this module outputs a clean, regulated 3.3V, making it ideal for powering low-power microcontrollers and IoT sensors.

📌 Project Overview

The core of the design is the AP3015 DC-DC Boost Converter, which efficiently steps up the 1.2V battery voltage to 3.3V. To conserve energy, the circuit features an autonomous switching mechanism that detects ambient light conditions entirely through hardware.

✨ Key Features

  • Input: 1.2V Ni-MH Rechargeable Battery (AA/AAA) & Mini Solar Panel.
  • Output: Regulated 3.3V DC.
  • Hardware Auto-Sleep/Wake:
    • ☀️ Day Mode (Charging): The solar panel charges the battery. The panel voltage drives the gate of a 2N7002 MOSFET, pulling the SHDN (Shutdown) pin of the AP3015 to ground. The regulator sleeps, and the 3.3V output is disabled.
    • 🌙 Night Mode (Discharging): When the panel voltage drops in the dark, the MOSFET turns off. The AP3015 wakes up and begins boosting the battery voltage to 3.3V.

🛠️ Working Principle & Topology

The circuit can be divided into three main stages:

  1. Charging Stage: Energy from the solar panel flows through a Schottky diode (SS14) into the battery, preventing reverse leakage at night.
  2. Switching Stage: The Q1 MOSFET acts as a light-dependent switch. It toggles the regulator's shutdown pin based on the presence of solar voltage.
  3. Boost Stage: The U1 IC (AP3015) drives an inductor (L1, 10uH). The resulting flyback voltage is rectified by D1 and smoothed by C2. The feedback voltage divider (R1 and R2) strictly maintains the output at 3.3V.

Parts

5
QtyValueFootprintReferences
1Battery_CellBattery:BatteryHolder_Keystone_1058_1x2032BT1
1LEDLED_THT:LED_D5.0mmD1
1LOGOLOGOG1
1RResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR1
1SW_DPST_x2Button_Switch_THT:SW_TH_Tactile_Omron_B3F-100xSW1

More from Thaurens/myHardware_Designs

2
  • 2 layers30.4 × 52.6 mmBreadboard Power Supply, the printed circuit board in 3D

    Breadboard Power Supply

    Thaurens/myHardware_Designs

    A collection of my open-source hardware designs, including schematics, PCB layouts, and documentation.

    18 parts
  • 2 layers33.9 × 16.9 mmTiny Solar Power Supply, the printed circuit board in 3D

    Tiny Solar Power Supply

    Thaurens/myHardware_Designs

    A collection of my open-source hardware designs, including schematics, PCB layouts, and documentation.

    18 parts

Similar boards

  • 2 layers98 × 27 mmXy limit, the printed circuit board in 3D

    Xy limit

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    5 parts3.7k
  • 2 layers21 × 33 mm24g2usb pico2w, the printed circuit board in 3D

    24g2usb pico2w

    joypad-ai/joypad-os

    Universal controller firmware for building adapters, dongles, and custom controllers.

    5 parts1.7kApache-2.0
  • 2 layers53.2 × 59.6 mmA10 OLinuXino Lime Rev B SHIELD TEMPLATE, the printed circuit board in 3D

    A10 OLinuXino Lime Rev B SHIELD TEMPLATE

    OLIMEX/OLINUXINO

    OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

    5 parts1.5k
  • 2 layers30 × 11 mmMain control board servo tester, the printed circuit board in 3D

    Main control board servo tester

    jamro/tiny-engineer

    A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

    5 parts1.1k
  • 2 layers78.8 × 35.3 mmKiCadTest, the printed circuit board in 3D

    KiCadTest

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    5 parts915
  • 2 layers50 × 23 mmMiniCircuits LTCC, the printed circuit board in 3D

    MiniCircuits LTCC

    VanceVagell/kv4p-ht

    Open source handheld ham radio project KV4P-HT

    5 parts828GPL-3.0
  • 2 layers20.3 × 15.2 mmL0 light sensor, the printed circuit board in 3D

    L0 light sensor

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    5 parts546MIT

Questions

How big is the LED Torch PCB?

It measures 58.5 × 24.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the LED Torch use?

5 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the LED Torch KiCad files?

From the Thaurens/myHardware_Designs repository on GitHub, at the commit this page was made from: the board is LED-Torch/LED_Torch.kicad_pcb and its schematic Breadboard-Power-Supply/Breadboard Power Supply.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the LED Torch design in my own project?

Its repository states no licence, so its author keeps all rights: ask Thaurens before reusing the design.