

STM32 Sensor Expansion Board
This repo have my some kicad project files
- Size
- 142.8 × 103.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 32
- Nets
- 87
- Pads
- 232
- Tracks, vias
- 202, 17
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 7 Jul 2026
- Updated
- 7 Jul 2026
Overview
STM32 Sensor Expansion Board is an open-source printed circuit board by 7903555032, from the 7903555032/KiCad_Projects repository on GitHub. It is a 2-layer board of 142.8 × 103.3 mm with 32 parts on 87 nets, routed with 202 tracks and 17 vias.
It is built around the LM317 and LM7805. Its parts include 8 resistors, 8 connectors, 4 diodes, 3 capacitors and 3 ICs. It belongs with the sensors and measurement boards and the STM32 boards of this library.
Main components
2LM317
SOT-223-40℃~+85℃@(Ta) 0.003%Vout 1 1.3V~37V 1A 40V 80dB@(120Hz) Adjustable Positive Short Circuit Protection、Thermal shutdown SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSJSMSEMIVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsLM7805
TO-2630℃~+125℃ 1 1A 20V 2V 42uV 5V 62dB@(120Hz) 8mA Fixed Over Temperature Protection、Short Circuit Protection Positive TO-263 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSYONGYUTAIVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdKiCad_Projects
This repo have my some kicad project files
Parts
32| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2(I2C)1, J3(UART)1, J5(DHT11)1, J6(HCSR-04)1 |
| 3 | 330 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R4, R8 |
| 2 | 4.7k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5, R6 |
| 1 | 0.1u | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C2 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7 |
| 1 | 10u | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C1 |
| 1 | 240 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 390 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | Barrel_Jack_Switch | Connector_BarrelJack:BarrelJack_CUI_PJ-102AH_Horizontal | J1 |
| 1 | C | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C3 |
| 1 | Conn_01x01_Pin | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J8 |
| 1 | Conn_01x06_Pin | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J4(SPI)1 |
| 1 | Conn_01x08_Pin | Connector_Molex:Molex_SL_171971-0008_1x08_P2.54mm_Vertical | J7(MPU6050)1 |
| 1 | Diode | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | LED_3v | LED_THT:LED_D5.0mm | D3 |
| 1 | LED_5v | LED_THT:LED_D5.0mm | D2 |
| 1 | LED_Power | LED_THT:LED_D5.0mm | D4 |
| 1 | LM317 | Package_TO_SOT_THT:TO-220-3_Vertical | U2 |
| 1 | LM7805 | Package_TO_SOT_THT:TO-220-3_Vertical | U1 |
| 1 | NUCLEO64-F411RE | Module:ST_Morpho_Connector_144_STLink | U3 |
| 1 | RESET | Button_Switch_THT:SW_PUSH_6mm | SW3 |
| 1 | SW_SPDT_312 | Button_Switch_THT:SW_Slide-03_Wuerth-WS-SLTV_10x2.5x6.4_P2.54mm | SW1 |
| 1 | USER_BTN | Button_Switch_THT:SW_PUSH_6mm | SW2 |
The 29 most common of 32 parts.
More from 7903555032/KiCad_Projects
1- 2 layers42.1 × 20.2 mm

Similar boards
- 2 layers110 × 92.7 mm

Yaacwk
federicobriata/iz1glg_yaacw_keyer
YAACWK, Yet Another Arduino CW Keyer, the cheapest HW stuff compatible with K3ng keyer software ( https://github.com/k3ng/k3ng_cw_keyer ). This project contain Eagle project and library of YAACWK.
87 parts7CC-BY-SA-4.0 - 2 layers84.2 × 86.4 mm

Thesis custom arduino board
lonapse456-glitch/ulang_sys_res
System files of Automated Deep Learning-based Counting System for Giant Freshwater Prawn
41 parts1 - 2 layers30.4 × 52.6 mm

Breadboard Power Supply
Thaurens/myHardware_Designs
A collection of my open-source hardware designs, including schematics, PCB layouts, and documentation.
18 parts - 2 layers28.5 × 54.5 mm

Breadboard power supply
Tirthkush/Breadboard-Power-Supply-PCB
This folder contains the KiCad PCB layout for the Breadboard Power Supply PCB.
18 parts - 2 layers87.9 × 95 mm

Power supply 17VDC low noise
AndmDam/kiCad_repo
Repositorio de mis archivos de mis proyectos de kicad.
37 parts - 2 layers70 × 50 mm

S88iso
GBert/railroad
git clone https://github.com/arendst/Tasmota.git cd Tasmota git tag pio run
33 parts36 - 2 layers100 × 35 mm

Two comparator effect
cyberboy666/two_comparator_effect
analog video posterisation effect - adapted from a rob schafer design
34 parts15GPL-3.0 - 2 layers

Alim10o
acmo0/PedalBoard-Power-Supply-Diy
This is a description of pedalboard power supplies that I designed an made. I use this power supplies, they are fully working. Pay attention : they are made for 230VAC.
110 parts14GPL-3.0
Questions
How big is the STM32 Sensor Expansion Board PCB?
It measures 142.8 × 103.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the STM32 Sensor Expansion Board use?
32 parts, built around the LM317 and LM7805. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the STM32 Sensor Expansion Board KiCad files?
From the 7903555032/KiCad_Projects repository on GitHub, at the commit this page was made from: the board is STM32_Sensor_Expansion_Board.kicad_pcb and its schematic Power_Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the STM32 Sensor Expansion Board design in my own project?
Its repository states no licence, so its author keeps all rights: ask 7903555032 before reusing the design.