
MidiBox3
Dethernal/Midibox3
New features for DIN5 MIDI → Waweblaster interface board. Now with MT-32 stuff.

New features for DIN5 MIDI → Waweblaster interface board. Now with MT-32 stuff.
MidiBox3 old is an open-source printed circuit board by Dethernal, from the Dethernal/Midibox3 repository on GitHub, published under the MIT licence. It is a 2-layer board of 100 × 100 mm with 56 parts on 29 nets, routed with 322 tracks and 15 vias.
It is built around the JTE0624D12, MM74HCT00M and PESD5V0S1BA, with the DB104 among its other parts. Its parts include 22 capacitors, 7 resistors, 5 diodes, 5 connectors and 4 ICs. It belongs with the interfaces and adapters boards of this library.
My attempt to make new Waveblaster-compatible interface board.
Measure power consumption. What maximum current on +5V line is? Do I really need output filter and what parameters it must have? So, I need to characterize all imortant parameters.
Next, there are more components on PCB that really needed for working. Also some components are more expensive than necessary. It will be reasonable to find cheaper ones.
Finally, STM32F103CBT6 is a beast and I love it. It have USB support and I planned use it in next revision of PCB. I don't know about ADC out via USB, but as power source and MIDI in port it will definitely work. Maybe it also may work as HardMPU, but this will require special DOS driver and I think it has lower priority.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C2, C3, C13, C17, C18 |
| 4 | 100pF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C19, C20, C21, C22 |
| 4 | 220uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1, C8, C14, C15 |
| 2 | 0R | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R5, R7 |
| 2 | 100nH | Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L1, L2 |
| 2 | 15pF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C6, C7 |
| 2 | 1uF | Capacitor_THT:C_Rect_L16.5mm_W4.7mm_P15.00mm_MKT | C11, C12 |
| 2 | 220R | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R3 |
| 2 | 33nH | Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L3, L4 |
| 2 | 47pF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C4, C5 |
| 2 | 47uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C9, C10 |
| 2 | PESD5V0S1BA | Diode_SMD:D_SOD-323_HandSoldering | D3, D4 |
| 1 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R4 |
| 1 | 10uF | Capacitor_Tantalum_SMD:CP_EIA-6032-15_Kemet-U_Pad2.25x2.35mm_HandSolder | C16 |
| 1 | 1N4148 | Diode_SMD:D_SOD-323_HandSoldering | D1 |
| 1 | 4.7K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2 |
| 1 | 470R | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R6 |
| 1 | Barrel_Jack_Switch | Connector_BarrelJack:BarrelJack_Horizontal | J1 |
| 1 | Conn_02x13_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x13_P2.54mm_Vertical | J3 |
| 1 | Conn_Coaxial_x2 | Connector_DragonCity:RCA_Dual_Jack_Board_RS-209_03x3mm_Vertical | J5 |
| 1 | DB104 | Diode_SMD:Diode_Bridge_Vishay_DFSFlat | D2 |
| 1 | JTE0624D12 | Converter_DCDC:Converter_DCDC_XP_POWER_JTExxxxDxx_THT | U3 |
| 1 | LED | LED_THT:LED_D3.0mm_Horizontal_O3.81mm_Z2.0mm | D5 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Horizontal_TabUp | U4 |
| 1 | MIDI IN | Connector_Molex:Molex_KK-254_AE-6410-04A_1x04_P2.54mm_Vertical | J2 |
| 1 | MIDI THRU | Connector_Molex:Molex_KK-254_AE-6410-04A_1x04_P2.54mm_Vertical | J4 |
| 1 | MM74HCT00M | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U2 |
| 1 | PC817 | Package_DIP:DIP-4_W7.62mm | U1 |
| 1 | R_POT_Dual | Potentiometer_THT:Potentiometer_Alps_RK163_Dual_Horizontal | RV1 |
| 1 | SW_DIP_x01 | Connector_Hirose:Hirose_DF13-02P-1.25DSA_1x02_P1.25mm_Vertical | SW1 |
The 49 most common of 56 parts.

Dethernal/Midibox3
New features for DIN5 MIDI → Waweblaster interface board. Now with MT-32 stuff.

Dethernal/Midibox3
New features for DIN5 MIDI → Waweblaster interface board. Now with MT-32 stuff.

Dethernal/Midibox3
New features for DIN5 MIDI → Waweblaster interface board. Now with MT-32 stuff.




balazsbencs/ardor
This is a DIY multieffects project with a Raspberry Pi and and Codec Zero and a Raspberry Pi Display 2. With Full NAM A2 support.


b5463/kino-d4
Open-source four-lens digital camera with synchronized capture, original-frame storage, and a USB control workbench.

embeddedci-com/pcb-trace-length-analyzer
Two of them, and the difference between them is the point.

It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
56 parts, built around the JTE0624D12, MM74HCT00M, PESD5V0S1BA and DB104. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Dethernal/Midibox3 repository on GitHub, at the commit this page was made from: the board is midiBox3/midiBox3_old.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).