Skip to the content
4 layers94 × 122 mmYuEEG 8CH RevE, the printed circuit board in 3D

YuEEG 8CH RevE

YuTaoV5/YuEEG181

自制ADS1299上位机程序,使用fluent绘制界面

Size
94 × 122 mm
Copper layers
4
Thickness
1.6 mm
Parts
378
Nets
264
Pads
1,152
Tracks, vias
4,882, 512
Pours
8
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
18 Jun 2024
Updated
1 Nov 2026

Overview

YuEEG 8CH RevE is an open-source printed circuit board by YuTaoV5, from the YuTaoV5/YuEEG repository on GitHub. It is a 4-layer board of 94 × 122 mm with 378 parts on 264 nets, routed with 4,882 tracks and 512 vias.

It is built around the BAV199, PESD5V0S1BA and BZT52C8V2S, with the PESD5V0U1BAF, SMF5.0A and USBLC6-2SC6 among its other parts. Its parts include 145 resistors, 105 capacitors, 28 diodes, 5 transistors and 4 fuses.

Main components

6

README

hardware/YuEEG_8CH_RevE/README.md

YuEEG Rev E 工程评审版

94 × 122 mm、四层、378 个元件、15 页原理图。以 YuEEG_8CH_RevE.kicad_pro 打开 KiCad 9 工程。

  • 双 Type-C 同边:DATA/FLASH 为隔离原生 USB,CHARGE/POWER 为独立充电/供电;VBUS 不并联。
  • ESP32-S3-WROOM-1-N16R8;USB CDC 与 Wi-Fi UDP 并行;SDMMC microSD 备份。
  • DWO DO0200PFS12 RM67162 1.91 英寸 AMOLED,专用 2.8/1.8 V 电源及电平转换;需要确认供应商版本和配套排线。
  • 0.53 mm Panasonic EVPBB2A9B000 超薄贴片 RESET/BOOT/REC;电解电容和按钮均在正面。
  • CH1–8、REF、BIAS 同列;移除外置模拟前端扩展接口,恢复直接对称 P/N 输入路径。
  • 圆角板框、圆角丝印分区、分组状态灯;黑色阻焊/白字/ENIG 外观。

文件入口

原理图、PCB、加工文件、引脚复核及固件快照由 CHECKSUMS.json 绑定。过孔填孔/铜封帽、模块与外壳的实际配合、屏幕初始化、SD 卡延迟、并行传输及模拟噪声需要首板验证。3D 中屏幕图案仅为布局示意,模型不替代供应商机械图。工程评审通过不等于人体使用放行或医疗认证。

Parts

378
QtyValueFootprintReferences
324.99k 0.1%Resistor_SMD:R_0603_1608MetricR111, R112, R113, R114, R121, R122, R123, R124, R131, R132, R133, R134, R141, R142, R143, R144 +16
2110kResistor_SMD:R_0603_1608MetricR201, R202, R203, R204, R205, R206, R207, R1002, R1006, R1111, R1112, R1113, R1114, R1115, R1116, R1120 +5
17100n 16VCapacitor_SMD:C_0603_1608MetricC603, C609, C620, C621, C630, C631, C632, C640, C660, C701, C702, C703, C706, C707, C709, C712 +1
1647p C0G 1%Capacitor_SMD:C_0603_1608MetricC111, C112, C121, C122, C131, C132, C141, C142, C151, C152, C161, C162, C171, C172, C181, C182
16BAV199Package_TO_SOT_SMD:SOT-23D111, D112, D121, D122, D131, D132, D141, D142, D151, D152, D161, D162, D171, D172, D181, D182
101u 10V X7RCapacitor_SMD:C_0603_1608MetricC210, C211, C212, C213, C214, C215, C216, C217, C410, C418
1047kResistor_SMD:R_0603_1608MetricR647, R651, R713, R1031, R1032, R1033, R1034, R1035, R1036, R1037
91u 10VCapacitor_SMD:C_0603_1608MetricC221, C222, C224, C301, C705, C1004, C1006, C1011, C1103
80R REF SELECTResistor_SMD:R_0603_1608MetricR115, R125, R135, R145, R155, R165, R175, R185
8100n 10VCapacitor_SMD:C_0603_1608MetricC203, C223, C305, C1003, C1008, C1009, C1012, C1102
81n C0G 2%Capacitor_SMD:C_0603_1608MetricC113, C123, C133, C143, C153, C163, C173, C183
822RResistor_SMD:R_0603_1608MetricR1021, R1022, R1023, R1024, R1025, R1026, R1027, R1101
71MResistor_SMD:R_0603_1608MetricR646, R648, R649, R662, R714, R715, R1005
6100kResistor_SMD:R_0603_1608MetricR650, R707, R712, R716, R1001, R1004
62.2kResistor_SMD:R_0603_1608MetricR609, R663, R840, R841, R842, R843
633RResistor_SMD:R_0603_1608MetricR301, R302, R303, R304, R305, R306
510n C0GCapacitor_SMD:C_0603_1608MetricC403, C404, C411, C416, C641
4100k 0.1%Resistor_SMD:R_0603_1608MetricR641, R643, R661, R711
410u 10V X7RCapacitor_SMD:C_0805_2012MetricC202, C412, C415, C417
422u 10V X7RCapacitor_SMD:C_1206_3216MetricC407, C1002, C1010, C1101
422u 25V X7RCapacitor_SMD:C_1206_3216MetricC401, C402, C406, C607
424R 1%Resistor_SMD:R_0603_1608MetricR701, R702, R703, R704
4AMOLED M2 / 6mm STANDOFFMountingHole:MountingHole_2.2mm_M2H1001, H1002, H1003, H1004
4PESD5V0S1BADiode_SMD:D_SOD-323D604, D605, D902, D903
3100k 1%Resistor_SMD:R_0603_1608MetricR310, R607, R608
347u 16V X7RCapacitor_SMD:C_1210_3225MetricC602, C605, C606
2100R 1%Resistor_SMD:R_0603_1608MetricR632, R633
210k 0.1%Resistor_SMD:R_0603_1608MetricR402, R404
210k 1%Resistor_SMD:R_0603_1608MetricR601, R602
210n 25VCapacitor_SMD:C_0603_1608MetricC642, C713
22.2u 10V X7RCapacitor_SMD:C_0805_2012MetricC413, C414
222u 16V X7RCapacitor_SMD:C_1206_3216MetricC405, C604
24.7u 10VCapacitor_SMD:C_0603_1608MetricC1005, C1007
24.99k 1%Resistor_SMD:R_0603_1608MetricR410, R411
2470R 1%Resistor_SMD:R_0603_1608MetricR620, R621
2499k 1%Resistor_SMD:R_0603_1608MetricR211, R212
25.1k 1%Resistor_SMD:R_0603_1608MetricR901, R902
2AO3401A BACK-TO-BACKPackage_TO_SOT_SMD:SOT-23Q603, Q604
2AO3401A USB BACK-TO-BACKPackage_TO_SOT_SMD:SOT-23Q701, Q702
2BZT52C8V2SDiode_SMD:D_SOD-323D606, D607
2PESD5V0U1BAFDiode_SMD:D_SOD-323D602, D603
2SMF5.0ADiode_SMD:D_SOD-123FD601, D701
2USBLC6-2SC6Package_TO_SOT_SMD:SOT-23-6D1101, D1102
1+2V5ATestPoint:TestPoint_Pad_D1.5mmTP405
1+3V3TestPoint:TestPoint_Pad_D1.5mmTP404
1+4V4_PRETestPoint:TestPoint_Pad_D1.5mmTP403
1-2V5ATestPoint:TestPoint_Pad_D1.5mmTP406
10.010R 1% 0.5WResistor_SMD:R_1210_3225MetricR623
10.75A hold PTCFuse:Fuse_1206_3216MetricF401
11.00M 0.1%Resistor_SMD:R_0603_1608MetricR710
11.14k 1%Resistor_SMD:R_0603_1608MetricR604
11.50k 1%Resistor_SMD:R_0603_1608MetricR603
11.58M 0.1%Resistor_SMD:R_0603_1608MetricR640
11.5A hold PTCFuse:Fuse_1206_3216MetricF701
11.5n C0GCapacitor_SMD:C_0603_1608MetricC201
11.81M 0.1%Resistor_SMD:R_0603_1608MetricR660
1100n 10VCapacitor_SMD:C_0805_2012MetricC302
1100u 10VCapacitor_SMD:CP_Elec_6.3x7.7C220
110n 10VCapacitor_SMD:C_0603_1608MetricC1120
110u 10VCapacitor_SMD:C_0805_2012MetricC303
110u 25V X7RCapacitor_SMD:C_1206_3216MetricC710
1160R 1%Resistor_SMD:R_0603_1608MetricR630
11A fast fuse / 32VFuse:Fuse_1206_3216MetricF601
11A hold PTCFuse:Fuse_1206_3216MetricF602
11M 1%Resistor_SMD:R_0603_1608MetricR210
11kResistor_SMD:R_0603_1608MetricR1003
11n 25VCapacitor_SMD:C_0603_1608MetricC1001
11u 16VCapacitor_SMD:C_0603_1608MetricC704
11uH SRP5030T-1R0M / Isat11AInductor_SMD:L_Bourns_SRP5030TL601
12.00k 1%Resistor_SMD:R_0603_1608MetricR622
12.05M 0.1%Resistor_SMD:R_0603_1608MetricR642
12.2uH Isat>=3A DCR<=80mRInductor_SMD:L_Taiyo-Yuden_NR-40xxL401
122u 10VCapacitor_SMD:C_0805_2012MetricC304
123.7k 1%Resistor_SMD:R_0603_1608MetricR706
1260R 1%Resistor_SMD:R_0603_1608MetricR631
127.4k 0.1%Resistor_SMD:R_0603_1608MetricR401
12N7002 RAW UV GATEPackage_TO_SOT_SMD:SOT-23Q607
12S RAW: B+ / MID / B-Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_VerticalJ401
131.2k 0.1%Resistor_SMD:R_0603_1608MetricR403
1330kResistor_SMD:R_0603_1608MetricR634

The 298 most common of 378 parts.

More from YuTaoV5/YuEEG

3
  • 4 layers70 × 80 mmYuEEG 8CH RevG, the printed circuit board in 3D

    YuEEG 8CH RevG

    YuTaoV5/YuEEG

    自制ADS1299上位机程序,使用fluent绘制界面

    305 parts181
  • 4 layers44 × 48 mmYuEEG 8CH RevF POWER, the printed circuit board in 3D

    YuEEG 8CH RevF POWER

    YuTaoV5/YuEEG

    自制ADS1299上位机程序,使用fluent绘制界面

    50 parts181
  • 2 layers35 × 67 mmYuEEG DISPLAY G, the printed circuit board in 3D

    YuEEG DISPLAY G

    YuTaoV5/YuEEG

    自制ADS1299上位机程序,使用fluent绘制界面

    15 parts181

Similar boards

  • 4 layers100 × 80 mmBuilt, the printed circuit board in 3D

    Built

    devbisme/ai-circuit-design-tests

    Tests of KiCad-related AI tools.

    243 parts10
  • 2 layers37 × 45 mmLED V01, the printed circuit board in 3D

    LED V01

    347800570/stm32-led-gift

    基于STM32的灯带礼物制作项目:红外遥控、9种灯效、温度变色和音乐律动,含KiCad硬件及67/74颗固件。

    58 partsMIT
  • 4 layers37 × 41 mmLovelace as-005, the printed circuit board in 3D

    Lovelace as-005

    chanulee/audiostream-esp32

    Airplay 2 + Spotify Connect + Bluetooth

    65 parts
  • 4 layers76 × 50 mmWigglecam, the printed circuit board in 3D

    Wigglecam

    jadenrhee/wigglecam-controller

    RP2040 co-processor board for a 4-lens wigglegram camera: constant-current flash, controls, battery telemetry, Pi 5 I2C interface. 4-layer, DRC-clean, fab-ready.

    105 parts
  • 6 layers78 × 89.5 mmAtx-24pin rev3, the printed circuit board in 3D

    Atx-24pin rev3

    nathanfraske/CEC-Platform

    ONE board file, kept current by the wave (owner directive 2026-07-25: "the current best should be placed into a candidate folder per board and kept current with only one board ideally so we have a reference").

    129 partsApache-2.0
  • 2 layers80 × 52 mmQuiet trace, the printed circuit board in 3D

    Quiet trace

    rwrife/quiet-trace

    USB-powered ESP32-S3 ambient sound-level logger for home offices and shared rooms that keeps only privacy-preserving loudness summaries and serves a local history dashboard—never raw audio.

    38 partsMIT
  • 2 layers80 × 46 mmIMU PLACEMENT STUDY, the printed circuit board in 3D

    IMU PLACEMENT STUDY

    SpaceCadetJ/LoRa-Autonomous-Boat

    An embedded-systems project spanning STM32 firmware, LoRa communication, PCB reconstruction and a documented V2 redesign.

    130 parts
  • 4 layers39.6 × 66.8 mmFan controller, the printed circuit board in 3D

    Fan controller

    xanderhendriks/pcb-fan-controller

    67 parts

Questions

How big is the YuEEG 8CH RevE PCB?

It measures 94 × 122 mm and has 4 copper layers, 1.6 mm thick.

What parts does the YuEEG 8CH RevE use?

378 parts, built around the BAV199, PESD5V0S1BA, BZT52C8V2S and PESD5V0U1BAF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the YuEEG 8CH RevE KiCad files?

From the YuTaoV5/YuEEG repository on GitHub, at the commit this page was made from: the board is hardware/YuEEG_8CH_RevE/YuEEG_8CH_RevE.kicad_pcb and its schematic hardware/YuEEG_8CH_RevD/YuEEG_8CH_RevD.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the YuEEG 8CH RevE design in my own project?

Its repository states no licence, so its author keeps all rights: ask YuTaoV5 before reusing the design.