Skip to the content
PCBKitNew board
4 layers59.7 × 100.3 mmPropeller quickstart pcb, the printed circuit board in 3D

Propeller quickstart pcb

deets/deets-fpv-laptimer

FPV laptiming solution

Open in PCBKitView on GitHub.kicad_pcb
Size
59.7 × 100.3 mm
Copper layers
4
Thickness
1.6 mm
Parts
7
Nets
60
Pads
106
Tracks, vias
135, 22
Pours
3
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
4 Jan 2020
Updated
27 Dec 2022

Overview

Propeller quickstart pcb is an open-source printed circuit board by deets, from the deets/deets-fpv-laptimer repository on GitHub. It is a 4-layer board of 59.7 × 100.3 mm with 7 parts on 60 nets, routed with 135 tracks and 22 vias.

It is built around the MCP3008-I/P and RX5808. Its parts include 5 ICs, 1 capacitor and 1 connector.

Main components

2

Parts

7
QtyValueFootprintReferences
4RX5808deets:RX5808U1, U2, U3, U4
11uFCapacitor_THT:C_Radial_D5.0mm_H5.0mm_P2.00mmC1
1MCP3008Package_DIP:DIP-16_W7.62mmU5
1propeller-quickstart-40000-rev-b-connectorConnector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_VerticalJ1

Questions

How big is the Propeller quickstart pcb PCB?

It measures 59.7 × 100.3 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Propeller quickstart pcb use?

7 parts, built around the MCP3008-I/P and RX5808. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Propeller quickstart pcb KiCad files?

From the deets/deets-fpv-laptimer repository on GitHub, at the commit this page was made from: the board is pcbs/propeller-quickstart-pcb/propeller-quickstart-pcb.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Propeller quickstart pcb design in my own project?

Its repository states no licence, so its author keeps all rights: ask deets before reusing the design.

Similar boards

  • 2 layers74.4 × 51.2 mmEsp32-wroom timer, the printed circuit board in 3D

    Esp32-wroom timer

    AlessandroAU/Chorus32-ESP32LapTimer

    This is an ESP32 port of the popular Chorus RF Laptimer

    66 parts102GPL-3.0
  • 2 layers95.9 × 53.3 mmWizardView, the printed circuit board in 3D

    WizardView

    PropNuts/wizardtracker-hardware

    A RSSI-based lap timer for drone racing.

    80 parts13MIT
  • 4 layers65.8 × 77.2 mmVtx scanner pcb, the printed circuit board in 3D

    Vtx scanner pcb

    deets/deets-fpv-vtx-scanner

    39 parts5
  • 2 layers50 × 25 mmRx5808-receiver, the printed circuit board in 3D

    Rx5808-receiver

    msaribekyan/rx5808-receiver

    RX5808 based 5.8 GHz analog video receiver module

    39 parts3GPL-3.0
  • 2 layers49 × 49.9 mmFpvlaptracker32, the printed circuit board in 3D

    Fpvlaptracker32

    warhog/fpvlaptracker

    simple fpv lap tracking software, firmware and hardware

    28 parts3
  • 4 layers88.9 × 57.8 mmTinyTimer V01, the printed circuit board in 3D

    TinyTimer V01

    cd334/TD_TinyTimer

    This is a hardware for Phobos Lap Timer

    111 parts1
  • 2 layers50.8 × 43.5 mmZenith, the printed circuit board in 3D

    Zenith

    grimsteel/zenith

    A low cost USB-based FPV receiver/ground station

    10 parts