

Rx5808-receiver
RX5808 based 5.8 GHz analog video receiver module
- Size
- 50 × 25 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 39
- Nets
- 54
- Pads
- 163
- Tracks, vias
- 303, 55
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 4 Nov 2025
- Updated
- 10 Nov 2025
Overview
Rx5808-receiver is an open-source printed circuit board by msaribekyan, from the msaribekyan/rx5808-receiver repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 50 × 25 mm with 39 parts on 54 nets, routed with 303 tracks and 55 vias.
It is built around the STM32F042G6U6, RX5808 and XC6206P332MR, with the SKRHABE010 among its other parts. Its parts include 14 resistors, 13 capacitors, 3 ICs, 2 diodes and 2 connectors. It belongs with the STM32 boards of this library.
Main components
4STM32F042G6U6
UFQFPN-28(4x4)-40℃~+85℃ 1.65V~3.6V 12bit 24 32 Bit 32KB 48MHz 6KB ARM Cortex-M0 Built-in FLASH UFQFPN-28(4x4) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)RX5808
SMD-12_23.0X28.0X2.54PSMD-12_23.0X28.0X2.54P SMT ROHSJLCPCB AssemblyUncategorisedXC6206P332MR
SOT-23-40℃~+85℃@(Ta) 1 1uA 200mA 3.3V 6V Fixed Over Current Protection Positive SOT-23-3L Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTorex SemiconductorVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsSKRHABE010
SMD-8P,7.5x7.5mmSMD-8P,7.5x7.5mm Multi-Directional Switches ROHSALPSALPINEMulti-Directional Switches
README
README.mdrx5808-receiver
An open source RX5808 based 5.8 GHz analog video receiver module
Custom PCB design for RX5808 and STM32F042.
Features
RX5808 analog video receiver has the following features:
- 48 channels, including Raceband and Race Low
- RSSI monitoring
Hardware
KiCad was used for designing the schematic and the PCB.
Schematic
PCB
Parts
39| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100R | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R4, R9, R10, R11, R12 |
| 4 | 100nF | Capacitor_SMD:C_0402_1005Metric | C6, C7, C8, C13 |
| 3 | 10uF | Capacitor_SMD:C_0402_1005Metric | C5, C11, C12 |
| 2 | 10pF | Capacitor_SMD:C_0402_1005Metric | C1, C2 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric | R8, R18 |
| 2 | 1uF | Capacitor_SMD:C_0402_1005Metric | C3, C4 |
| 2 | 2.2uF | Capacitor_SMD:C_0402_1005Metric | C9, C10 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R20, R21 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 390k | Resistor_SMD:R_0402_1005Metric | R19 |
| 1 | 8MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | Ant | rx5808:HUBER_SUHNER_82_SMA-50-0-41_133_NE | AE1 |
| 1 | DEBUG | Connector_PinHeader_2.00mm:PinHeader_1x04_P2.00mm_Vertical | J3 |
| 1 | GREEN | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | LOGO | rx5808:cobalt_logo | G*** |
| 1 | Module | Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Vertical | J2 |
| 1 | OLED-128O064D | Display:OLED-128O064D | DS1 |
| 1 | ORANGE | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | RX5808 | Custom:RX5808 | U1 |
| 1 | SKRHABE010 | rx5808:5JOYSTICK_ALPS_SKRHABE010 | SW2 |
| 1 | STM32F042G6U6 | Package_DFN_QFN:QFN-28_4x4mm_P0.5mm | U4 |
| 1 | XC6206P332MR | Package_TO_SOT_SMD:SOT-23-3 | U2 |
Similar boards
- 2 layers50.8 × 69.9 mm

- 4 layers34.8 × 18 mm

- 2 layers29.2 × 39.4 mm

- 2 layers50 × 25 mm

- 4 layers24.9 × 19.3 mm

- 2 layers74.4 × 51.2 mm

Esp32-wroom timer
AlessandroAU/Chorus32-ESP32LapTimer
This is an ESP32 port of the popular Chorus RF Laptimer
66 parts102GPL-3.0 - 2 layers95.9 × 53.3 mm

- 4 layers65.8 × 77.2 mm

Questions
How big is the Rx5808-receiver PCB?
It measures 50 × 25 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Rx5808-receiver use?
39 parts, built around the STM32F042G6U6, RX5808, XC6206P332MR and SKRHABE010. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Rx5808-receiver KiCad files?
From the msaribekyan/rx5808-receiver repository on GitHub, at the commit this page was made from: the board is pcb/rx5808-receiver.kicad_pcb and its schematic pcb/rx5808-receiver.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Rx5808-receiver design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).