4 layers100 × 100 mm
All boards
ChicoLiebl/pressure-acquisition-system
Pressure acquisition system for a piezoelectric sensor
154 parts1
4 layers65.8 × 77.2 mm
Vtx scanner pcb
deets/deets-fpv-vtx-scanner5- Size
- 65.8 × 77.2 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 39
- Nets
- 47
- Pads
- 150
- Tracks, vias
- 380, 84
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 5 Nov 2018
- Updated
- 22 Nov 2019
Overview
Vtx scanner pcb is an open-source printed circuit board by deets, from the deets/deets-fpv-vtx-scanner repository on GitHub. It is a 4-layer board of 65.8 × 77.2 mm with 39 parts on 47 nets, routed with 380 tracks and 84 vias.
It is built around the ESP32-WROVER-I, AI-1027-TWT-3V-R and AMS1117-3.3, with the RX5808, FSM4JSMATR and MMSS8050-H-TP among its other parts. Its parts include 9 resistors, 6 connectors, 4 capacitors, 4 ICs and 4 switches. It belongs with the ESP32 boards of this library.
Main components
9
ESP32-WROVER-I
SMD,18x31.4mmSMD,18x31.4mm WiFi Modules ROHSEspressif SystemsWiFi ModulesAI-1027-TWT-3V-R
插件,D=9.5mm-20℃~+80℃ 2.7kHz 2V~5V 5.5mm 80dB 9.5mm Active Buzzer (Built-in Driving Circuit) Electromagnetic 插件,D=9.5mm Buzzers ROHSPUI Audio, Inc.Buzzers
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsRX5808
SMD-12_23.0X28.0X2.54PSMD-12_23.0X28.0X2.54P SMT ROHSJLCPCB AssemblyUncategorised
FSM4JSMATR
SMD-4P,6x6mm-40℃~+85℃ 1.6N 100,000 cycles 24V 50mA 5mm 6mm 6mm Gull Wing Round Button SPST-NO Surface Mount,Vertical Without Bracket SMD-4P,6x6mm Tactile Switches ROHSTE ConnectivityTactile Switches
MMSS8050-H-TP
SOT-23-55℃~+150℃ 1 NPN 1.5A 100MHz 100nA 120 25V 300mW 500mV 5V NPN SOT-23 Bipolar (BJT) ROHSMicro Commercial ComponentsBipolar (BJT)
SJ-3523-SMT-TR
SMD-25℃~+85℃ 12V 19mm 1A 3.5mm Headphone Jack 5mm 9mm Black Brass、Copper alloy Silver Surface Mount TRS SMD Audio Connectors ROHSCUIAudio Connectors (Headphones)
SMA-J-P-H-RA-TH1
插件-65℃~+125℃ 1 20GHz 335V 50Ω Board Side Elbow Inner hole SMA Plugin Coaxial Connectors (RF) ROHSSamtecCoaxial Connectors (RF)XT60-M
THrough holeTHroughhole New Arrivals ROHSChangzhou Amass ElecUncategorised
Parts
39| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 10K | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R1, R2, R4, R5, R6, R7, R8, R9 |
| 4 | FSM4JSMATR | deets:Switch_Tactile_SMD_6x6mm | S1, S2, S3, S4 |
| 3 | MMSS8050-H-TP | digikey-footprints:SOT-23-3 | Q1, Q2, Q3 |
| 2 | 47uF | Capacitor_SMD:CP_Elec_5x5.8 | C1, C2 |
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C3 |
| 1 | 300nF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C4 |
| 1 | 470 | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R3 |
| 1 | AI-1027-TWT | deets:AI-1027-TWT | U4 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | Conn_01x05 | Connector_JST:JST_PH_S5B-PH-K_1x05_P2.00mm_Horizontal | J4 |
| 1 | Conn_01x06_Male | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | ESP32-WROVER-I | deets:XCVR_ESP32-WROVER-I | A1 |
| 1 | RX5808 | deets:RX5808 | U1 |
| 1 | SJ-3523-SMT-TR | deets:Switch_Slide_11.6x4mm_SJ-3523-SMT | CON1 |
| 1 | SMA-J-P-H-RA-TH1 | deets:SAMTEC_SMA-J-P-H-RA-TH1 | J3 |
| 1 | XT60-M | deets:AMASS_XT60-M-SIDE-MOUNT | J5 |
| 1 | oskj-dc-dc | deets:oskj-dc-dc | U3 |
| 1 | sh1106-1.3inch-oled | deets:sh1106-1.3inch-oled | J2 |
The 31 most common of 39 parts.
Questions
How big is the Vtx scanner pcb PCB?
It measures 65.8 × 77.2 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Vtx scanner pcb use?
39 parts, built around the ESP32-WROVER-I, AI-1027-TWT-3V-R, AMS1117-3.3 and RX5808. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Vtx scanner pcb KiCad files?
From the deets/deets-fpv-vtx-scanner repository on GitHub, at the commit this page was made from: the board is vtx-scanner-pcb/vtx-scanner-pcb.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Vtx scanner pcb design in my own project?
Its repository states no licence, so its author keeps all rights: ask deets before reusing the design.
Similar boards
- 2 layers161.3 × 76.1 mm
Stm32 timer app
ymhtwe/stm32_timer_app
general purpose control applications using stm32 timer module
117 parts - 2 layers263.5 × 63.5 mm
Tobor
evezor/tobor_v00
Tobor (robot spelled backwards), was built to be the most versatile open-source robotics system
124 parts126CERN-OHL-P-2.0 - 2 layers104.3 × 65.1 mm
- 4 layers25.4 × 25.4 mm
MiniCAM
Aharoni-Lab/MiniCAM
Using the Miniscope Software, multiple Miniscopes and MiniCAMs can be connected, streamed, and time-sync'ed recording simultaniously.
69 parts15 - 6 layers32 × 20 mm
Wire Free DAQ
Aharoni-Lab/Miniscope-Wire-Free-DAQ
All information, guides, and tutorials can be found on the Miniscope-Wire-Free-DAQ Wiki Page .
126 parts5 - 4 layers99 × 64 mm
- 2 layers20.2 × 24.7 mm
WaDAR Tag V1 0
jlab-sensing/RF-Backscatter-PCB-V1
This repo consists of the backscatter tag PCBs used with the WaDAR sensing system. This repo is a submodule of WaDAR. This is our first version of the tag used in WaDAR's sensing system.
13 parts1