
Battlepoint
dcowden/battlepoint
in KOTH each color tracks separately. the first time to run their timer out wins in AD mode two teams are attacking and one is defending.
Open-source boards designed in KiCad by dcowden on GitHub, from 2 repositories. A board’s address here is its repository’s there.

dcowden/battlepoint
in KOTH each color tracks separately. the first time to run their timer out wins in AD mode two teams are attacking and one is defending.

dcowden/esp32_breakout_board
The xc board logs data from an nrf52840 and sends it to an esp32 , which processes further. The board needs: 1. esp32 devkit c ( we need all the pins) (38 pin) 2. seed xiao nrf52840 (14 pin) 3.

dcowden/battlepoint
in KOTH each color tracks separately. the first time to run their timer out wins in AD mode two teams are attacking and one is defending.

dcowden/battlepoint
in KOTH each color tracks separately. the first time to run their timer out wins in AD mode two teams are attacking and one is defending.

dcowden/battlepoint
in KOTH each color tracks separately. the first time to run their timer out wins in AD mode two teams are attacking and one is defending.

dcowden/battlepoint
in KOTH each color tracks separately. the first time to run their timer out wins in AD mode two teams are attacking and one is defending.

dcowden/battlepoint
in KOTH each color tracks separately. the first time to run their timer out wins in AD mode two teams are attacking and one is defending.

dcowden/battlepoint
in KOTH each color tracks separately. the first time to run their timer out wins in AD mode two teams are attacking and one is defending.

dcowden/esp32_breakout_board
The xc board logs data from an nrf52840 and sends it to an esp32 , which processes further. The board needs: 1. esp32 devkit c ( we need all the pins) (38 pin) 2. seed xiao nrf52840 (14 pin) 3.

dcowden/esp32_breakout_board
The xc board logs data from an nrf52840 and sends it to an esp32 , which processes further. The board needs: 1. esp32 devkit c ( we need all the pins) (38 pin) 2. seed xiao nrf52840 (14 pin) 3.

dcowden/esp32_breakout_board
The xc board logs data from an nrf52840 and sends it to an esp32 , which processes further. The board needs: 1. esp32 devkit c ( we need all the pins) (38 pin) 2. seed xiao nrf52840 (14 pin) 3.

dcowden/esp32_breakout_board
The xc board logs data from an nrf52840 and sends it to an esp32 , which processes further. The board needs: 1. esp32 devkit c ( we need all the pins) (38 pin) 2. seed xiao nrf52840 (14 pin) 3.