

Controller kicad
- Size
- 108 × 82.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 124
- Nets
- 174
- Pads
- 521
- Tracks, vias
- 821, 178
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 27 Nov 2022
- Updated
- 17 Jan 2025
Overview
Controller kicad is an open-source printed circuit board by DavidTheFighter, from the DavidTheFighter/rocketry repository on GitHub, published under the MIT licence. It is a 2-layer board of 108 × 82.6 mm with 124 parts on 174 nets, routed with 821 tracks and 178 vias.
It is built around the LAN8742A-CZ, MCP1416-E/OT and IPD60R600C6, with the TLP250(F) among its other parts. Its parts include 42 capacitors, 36 resistors, 15 ICs, 15 connectors and 5 diodes. It belongs with the STM32 boards of this library.
Main components
4LAN8742A-CZ
QFN-24-EP(4x4)0℃~+70℃ 1.8V~3.3V 10BASE-T、100BASE-TX 10Mbit/s、100Mbit/s Ethernet Transceiver RMII QFN-24-EP(4x4) Ethernet Transceivers ROHSMicrochip TechnologyEthernet TransceiversMCP1416-E/OT
SOT-23-5-40℃~+150℃ 1 1.5A 1.5A 20ns 20ns 4.5V~18V 41ns 48ns 650uA Interleaved conduction protection Low Side MOSFET SOT-23-5 Gate Drivers ROHSMicrochip TechnologyGate DriversIPD60R600C6
TO-252-55℃~+150℃ 1 N-channel 20.5nC 3V 440pF 600mΩ 63W 650V 7.3A 88pF TO-252 MOSFETs ROHSInfineon TechnologiesMOSFETsTLP250(F)
DIP-8-20℃~+85℃ 1 1.5A 1.8V 10V~35V 2.5kV 20mA 500ns 500ns 5V 5kV/us 5mA DC DIP-8 Logic Output Optoisolators ROHSToshibaLogic Output Optoisolators
README
README.mdrocketry
Parts
124| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5, C6, C8, C10, C11, C12, C14, C15, C16, C17, C19, C23, C25, C27, C29, C37 +1 |
| 10 | 10K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4, R5, R8, R9, R10, R16, R18 |
| 6 | 1.5K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R14, R17, R19, R23, R27, R28 |
| 6 | Conn_01x03_Female | Connector_JST:JST_PH_S3B-PH-SM4-TB_1x03-1MP_P2.00mm_Horizontal | J6, J7, J8, J9, J10, J15 |
| 5 | 10nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C24, C26, C28, C36, C38 |
| 5 | 750 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R20, R21, R25, R30, R31 |
| 5 | Conn_01x02_Female | Connector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J2, J3, J4, J5, J11 |
| 4 | 10pF DNP | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C31, C32, C33, C34 |
| 4 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C39, C40, C41, C42 |
| 4 | 33 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11, R12, R13, R22 |
| 4 | 49.9 1% | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R24, R26, R29, R32 |
| 4 | D_Small | Diode_SMD:D_SMA-SMB_Universal_Handsoldering | D1, D2, D3, D4 |
| 4 | IPD60R600 | custom_footprints:TO-252-3_TabPin2-HandSolder | U4, U5, U9, U10 |
| 4 | MCP1416 | Package_TO_SOT_SMD:SOT-23-5 | U2, U3, U7, U8 |
| 3 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C7, C13, C18 |
| 2 | 150 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R7 |
| 2 | 2.2uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C4 |
| 2 | 23pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C3 |
| 2 | 25 MHz | Crystal:Crystal_SMD_HC49-SD_HandSoldering | Y1, Y2 |
| 2 | 27pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C20, C21 |
| 1 | 12.1K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R15 |
| 1 | 1K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R33 |
| 1 | 1M | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R34 |
| 1 | 220 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R36 |
| 1 | 22nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C35 |
| 1 | 350 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R35 |
| 1 | 4.7uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C30 |
| 1 | 470pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C22 |
| 1 | AD8495 | Package_SO:MSOP-8_3x3mm_P0.65mm | U12 |
| 1 | Conn_01x01 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J12 |
| 1 | Conn_01x03_Male | Connector_JST:JST_VH_B3P-VH-B_1x03_P3.96mm_Vertical | J13 |
| 1 | Conn_01x05_Female | Connector_JST:JST_PH_B5B-PH-K_1x05_P2.00mm_Vertical | J14 |
| 1 | FerriteBead_Small | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | FB1 |
| 1 | LAN8742 | Package_DFN_QFN:VQFN-24-1EP_4x4mm_P0.5mm_EP2.45x2.45mm | U6 |
| 1 | LED_Small | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D5 |
| 1 | NCP1117-3.3_TO252 | custom_footprints:TO-252-2-HandSolder | U15 |
| 1 | NCP1117-5.0_TO252 | custom_footprints:TO-252-2-HandSolder | U14 |
| 1 | RJ45_Amphenol_RJMG1BD3B8K1ANR | Connector_RJ:RJ45_Amphenol_RJMG1BD3B8K1ANR | J1 |
| 1 | STM32F407ZETx | Package_QFP:LQFP-144_20x20mm_P0.5mm | U1 |
| 1 | SW_RST | Button_Switch_SMD:SW_SPST_PTS810 | SW1 |
| 1 | TL431DBZ | Package_TO_SOT_SMD:SOT-23 | U11 |
| 1 | TLP250 | Package_DIP:DIP-8_W7.62mm | U13 |
The 117 most common of 124 parts.
More from DavidTheFighter/rocketry
3- 4 layers99.9 × 50.7 mm

- 4 layers72.9 × 62.2 mm

- 4 layers80 × 50 mm

Similar boards
- 2 layers140.7 × 47.4 mm

EG8010 A1
Millisman/EG8010
Collection of designs for the EG8010 (ASIC for single-phase SPWM control H-bridge)
201 parts17MIT - 2 layers304.6 × 105.7 mm

MPPT Booster 4kW Hardware
HNadeemTahir/AI_Inverter_Project
NgSpice Digital Twin of a complete off-grid solar power system: H-Bridge inverter (220V/50Hz, PI control, electro-thermal IGBT modeling) and 4kW MPPT boost converter (UC3843 analog control, KCL summing node, gate drive…
115 parts5 - 2 layers95 × 72 mm

- 2 layers182 × 84 mm

Boost converter
Abineshpk007/KICAD-boost-converter-gate-pulse-from-DSP-
This is my PCB, there are many outer like it but this is mine
29 parts1 - 2 layers

GB2
Andy18650/GB2-2025-team4
GitHub repository for Cambridge University Engineering part IIA project GB2: Electrical Power, Team 4
167 partsGPL-3.0 - 2 layers

PCB Design Project
asifahmad-namal2020/PCB_Design_Project
PCB of three phase inverter designed by Engr. Asif Ahmad
107 parts - 2 layers198 × 218 mm

- 2 layers226.2 × 263.7 mm

PCB HORNO
Bojtronic/TFG
Trabajo final de graduación para el grado de licenciatura en ingeniería en computadores
254 parts
Questions
How big is the Controller kicad PCB?
It measures 108 × 82.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Controller kicad use?
124 parts, built around the LAN8742A-CZ, MCP1416-E/OT, IPD60R600C6 and TLP250(F). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Controller kicad KiCad files?
From the DavidTheFighter/rocketry repository on GitHub, at the commit this page was made from: the board is engine-controller/ecu-kicad-v0.1/controller-kicad.kicad_pcb and its schematic engine-controller/ecu-kicad-v0.1/controller-kicad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Controller kicad design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).